Reference no: EM132393279
Advanced Flow Modelling Assignment -
Procedure and discussion points:
1. Create the computational geometry in DesignModeler/ Solidwroks/any CAD software with the mentioned dimensions.
2. Build an appropriate mesh for the model and perform a grid refinement study.
3. Using the converged grid, check the iterative convergence.
4. Draw the Velocity contour at different selected planes of your model and discuss your results.
5. Draw the pressure contour at different selected planes of your model and discuss your results.
6. Plot the temperature profile along a selected line from inlet to outlet and discuss.
7. Draw the wall shear stress and discuss.
8. Plot the axial velocity profile at any selected position of your model and discuss.
9. Draw the Velocity vectors at different selected planes of your model and discuss your results.
10. Calculate the drag and lift coefficient and discuss (if applicable).
11. Calculate the deposition efficiency/deposition fraction and discuss (if applicable).
12. Draw the particle trajectories for different flow rates and discuss (if applicable).
13. Calculate the heat transfer coefficients (if applicable).
14. Calculate the Nusselt number from the following correlation and discuss (if applicable);
NuD = 0.023Re4/5Dprn
15. Connect your results with the existing literature.
[Deposition Efficiency = (number of injected particle/number of trapped particle) x 100
A written report is to be submitted including a short introduction and conclusion (one page long for each). The report should contain a discussion of the points bolded above with evidence to support the discussion together with relevant figures such as figures illustrating the mesh or element distribution, plots of the velocity profiles, contour plots, etc.
Potential CFD Projects List Assignment -
1. CFD Simulation of Soot Formation And Flame Radiation.
2. CFD Modeling and Quality Forecasting for Cooling and Storage of Pelagic Species.
3. Hydraulic Design and performance analysis of a Mixed Flow Pump for Marine Water Jet Propulsion.
4. Computation fluid Dynamics Simulation of Spark Ignition Engine for Gaseous Fuels with Different Spark Time.
5. Estimation & CFD analysis of Re-entry Parameters for Hybrid Space Probe Capsule.
6. CFD Analyses of Ship Hull Forms.
7. CFD analysis of flow through venturimeter to determine the Coefficient of Discharge.
8. Hydrofoil analysis using CFD.
9. Study of F1 car aerodynamics front wing using computational Fluid dynamics (CFD).
10. Design and analysis of dust collector using CFD.
11. Design and analysis of globe valve as control valve using CFD software.
12. CFD analysis of shell and tube heat exchanger with fins for waste heat recovery.
13. CFD analysis of engine valve.
14. CFD study of Conventional and Under Floor Air Distribution System.
15. Aluminum Melting Furnace Design Optimization to Improve Energy Efficiency by Integrated Modeling.
16. Performance improvement of an automobile radiator using CFD analysis.
17. CFD Analysis Of Airflow And Temperature Distribution In Buildings.
18. A Project on Flow in gutters and downpipes.
19. Evaluation of CFD Sub-Models for the Intake Manifold Port Flow Analysis.
20. Evaluation of CFD to predict smoke movement in complex enclosed spaces.
21. CFD analysis of a simple convergent flow using ANSYS.
22. CFD analysis of supersonic exhaust in a scramjet engine.
23. CFD Analyses Of The Gas Flow Inside The Vessel Of A Hot Isotactic Press.
24. CFD based process on modeling of a rotary furnace for Aluminum scrap melting.
25. CFD analysis of combustion and emissions to study the effect of compression ratio and biogas substitution in a diesel engine.
26. Effect of Swept Blade on Performance of a Small Size Axial Fan.
27. CFD Solution of Internal (shock tube and coquette flow) & External (Airfoil and cylinder) flow.
28. CFD Analysis of Mixing and Combustion of a Scramjet Combustor with a Planer Strut Injector.
29. CFD analysis for transient turbocharger flows by varying flow rate.
30. A study of computational fluid dynamics Applied to room air flow.
31. Design and Analysis of a Radial Turbine with Back Swept Blading.
32. Investigation of Film Cooling Strategies of CFD versus Experiments-Potential for Using Reduced Models.
33. CFD analysis of exhaust manifold.
34. CFD Analysis of economizer in a tangential fired boiler.
35. CFD design for electric car battery cooling system.
36. A Project on Aerodynamic design study of ground vehicles.
37. CFD Application of Flameless Oxidation in Glass Melting Furnaces.
38. CFD prediction of loads on marine structures.
39. CFD analysis of fuel tank sloshing.
40. Optimizing flow rate of a carburetor by CFD analysis.
41. Computational Fluid Dynamics Modeling to Validate HVAC System Design.
42. Thermal modeling of "Green House Effect".
43. CFD Analysis of PACE Formula-1 Car.
44. CFD modeling of the automobile catalytic converter.
45. Heat Transfer in an Automotive Turbocharger Under Constant Load Points: a Computational Investigation.
46. CFD analysis of centrifugal fan.
47. CFD calculation of convective heat transfer coefficient and its Validation.
48. Air and fuel flow interaction in combustion chamber for Various injector locations.
49. Combined aerodynamic and structural optimization of a high-speed civil transport wing.
50. Manifold optimization of an internal combustion engine by using CFD analysis.
51. Analysis and Optimization of Micro channel Heat Sinking.
52. Reduction of drag in a buggy car model.
53. CFD simulation and field application by Mitigating snowdrift at the elevated SANAE IV research station in Antarctica.
54. Flow through/past sparse bodies.
55. Analysis of water flow for Laminar & Turbulent Flow in Conventional Water Tap.
56. CFD using the discrete-vortex method.
57. A vehicle body Drag Analysis using Computational Fluid Dynamics.
58. Numerical Solution of Navier - Stokes Equations for Separating and Reattaching Flow over a Double Steps Expansion and Contraction.
59. CFD analysis of an air cooled condenser by the copper & aluminum material.
60. Computational ?uid dynamics for the design of turbo machinery.
61. CFD prediction to optimize front end cooling module of a passenger vehicle.
62. Design and CFD Simulation of a Battery Module for a Hybrid Electric Vehicle Battery Pack.
63. Aerodynamic Design for Bus/Car Vehicle.
64. Conjugate heat transfer analysis in electronics devices.
65. Analysis of Cyclone dust collector air flow.
66. CFD analysis of natural convection in differentially heated enclosure.
67. Fluid and thermal behavior of natural convective boiling at a submerged heated surface.
68. Heat Transfer Modeling of Large Shipping Containers.
69. CFD analysis of an opposed piston internal combustion engine.
70. Flow Characteristics in a Cross-Flow Fan with Various Design Parameters.
71. Turbulence models in CFD.
72. CFD analysis of intake manifold in SI engines.
73. A theoretical analysis and CFD simulation on the ceramic monolith heat exchanger.
74. CFD analysis of a diffuser.
75. Flow analysis of marine propeller.
76. Fluid flow and temperature distribution in radiators used in automobiles.
77. Simulating the Blood Flow for the Aorta with a Stenosis.
78. Numerical analysis of wax melting.
79. Assessment of turbulence modeling for CFD.
80. CFD analysis and comparison of vertical tube with smooth tube.
81. Turbulent flow simulation in Kaplan draft tube.
82. CFD analysis of rocket nozzle.
83. ACDF-based analysis of the 14-bis aircraft aerodynamics and stability.
84. CFD analysis of mixed flow pump Impeller.
85. CFD Investigation of Airflow in any Car by using Fluent Analysis.
86. Design improvements on mixed flow pumps by Computational Fluid Dynamics.
87. Advanced Design For A Tail Wing For Better Performance.
88. Computational flow field analysis of a vertical axis wind turbine.
89. Analysis of multiphase flow in open channel flows using CFD.
90. CFD analysis of fluid flow and heat transfer in a single tube-fin arrangement of an automotive radiator.
91. Nozzle design optimization to reduce noise for turbo jet engine.
92. Design And Optimization of Automotive Cabin Cooling.
93. CFD analysis of gas flow behavior in economizer duct.
94. CFD analysis of an ejector for cooling applications.