Plot the final temperature against the initial pressure

Assignment Help Mechanical Engineering

Reference no: EM13708125

An insulated tank is divided into two parts by a partition. One part of the tank contains 2.5 kg of compressed liquid water at 60°C and 600 kPa while the other part is evacuated. The partition is now removed, and the water expands to fill the entire tank. the final temperature of the water and the volume of the tank for a final pressure of 10 kPa. Using EES software, investigate the effect of the initial pressure of water on the final temperature in the tank. Let the initial pressure vary from 100 to 600 kPa. Plot the final temperature against the initial pressure, and discuss the results.

Reference no: EM13708125

Questions Cloud

Determine the rates of heat and moisture removal from air : Air enters a window air conditioner at 1 atm, 32C, 70% relative humidity at a rate of 2 m^3/min, and it leaves as saturated air at 15C. Part of the moisture in the air that condenses during the process is also removed at 15C. Determine the rates of h..

Find the distance between the neutral axis and the centriod : A curved bar has a rectangular cross section with height h=(r_o)-(r_1)=50mm and width b=100mm. It's inner radius is 200mm. Find the distance between the neutral axis and the centriod.

Cantilevered beam with a rectangular cross section : A cantilevered beam with a rectangular cross section is loaded by a force perpendicular to the beam centerline at the free end. The cross section is 100mm high and 25 mm wide. The vertical load at the beam end is 40,000 N. Calculate how long the beam..

What is the corresponding wall thickness of the container : A parison is extruded from a die with outside diameter = 11.5 mm and inside diameter = 7.5 mm. The observed die swell is 1.25. The parison is used to blow mold a beverage container whose outside diameter = 112 mm (a standard size 2liter soda bottle)...

Plot the final temperature against the initial pressure : An insulated tank is divided into two parts by a partition. One part of the tank contains 2.5 kg of compressed liquid water at 60°C and 600 kPa while the other part is evacuated. The partition is now removed, and the water expands to fill the entire ..

The inner pipe of a double-pipe heat exchanger : The inner pipe of a double-pipe heat exchanger has an OD of 1.9 in. and contains 36 rectangular fins of the type shown in the sketch below. The fins are made of steel (k=34.9 Btu/h ? ft ? ?F) and are 0.5 in. high and 0.035-in. thick.

Plot the mass of ice against the initial temperature of ice : A 0.3-L glass of water at 20°C is to be cooled with ice to 5°C. The melting temperature and the heat of fusion of ice at atmospheric pressure are 0°C and 333.7 kJ/kg, respectively, and the density of water is 1 kg/L.

An insulated tank is divided into two parts by a partition : An insulated tank is divided into two parts by a partition. One part of the tank contains 2.5 kg of compressed liquid water at 60°C and 600 kPa while the other part is evacuated.

Gas is compressed from a state : A gas is compressed from a state of 15 lbf(in)^2, 0.5ft^3, to a final state of 60 lbf/(in)^2. The process equation relating P and V is P=aV+b, where a=-150 lbf/ft^3. Evaluate the work, in ft-lbf.

User Account

All Pages