P23875 Energy Systems Assignment

Assignment Help Mechanical Engineering

Reference no: EM132896889

P23875 Energy Systems - University of Portsmouth

You are required to design a thermal system to produce 20 kg/s of liquid water at 65 °C, from a source of water at 10°C. Heat is provided from exhaust gas at 300°C, with mass flow rate of 35 kg/s.

You should consider several designs and advise on the optimal heat exchanger you will use.

Your design should be supported by relevant calculations for each section including:

Transport: Exhaust gas is routed to the heat exchanger through a steel pipe (k = 60 W/mK) of 30 mm outside diameter, 3 mm wall thickness, and 500m length. The representative environmental conditions involve air 6 °C and velocity of 8 m/s in a cross flow over pipe. A 5 mm-thick coating of insulation (k = 0.02 W/mK) is at the outer surface of the pipe. Determine the temperature of exhaust gas at the pipe outlet. Determine the savings associated with application of the insulation layer compared to the heat loss from an uninsulated pipe. Advise whether an alternative insulative material can be used and what would be the effect.

Heat Exchanger size: Exhaust gas (leaving the pipe) is used to heat water to 65°C in a heat exchanger. The flow rate of the water is 20 kg/s. The overall heat transfer coefficient of the heat exchanger is 155 W/(m2 K) based on a surface area of 50 m2. Determine the effectiveness of the heat exchanger (you should consider at least two types), the heat transfer rates, and the outlet temperatures of the exhaust gas from the heat exchanger.

Note that the two sections are not independent, for example, the losses in the connecting pipe will affect the desired performance of the heat exchanger.

You should also consider how the performance of the system would be affected by a 5% variation in the heat exchanger area.

You should submit the report showing your main findings and analysis. Detailed calculations should be shown in the Appendix or in a spreadsheet. You must clearly state all assumptions made and discuss how these affect the accuracy of your findings.

Attachment:- Energy Systems.rar

Reference no: EM132896889

Questions Cloud

Estimate Jake cost of capital : The bonds are selling at 99% of face value. JSS has a beta of 1.4 and a marginal tax rate of 34%. Estimate Jake cost of capital

Cloud computing-describe the hypervisor : List the pros and cons of virtualization. Define and describe the hypervisor.

Develop new information security policy : If you were asked by your employer to develop a new Information Security Policy, where would you turn to find resources to build this policy?

Will the system reliability decrease : Engineers intend to put a backup component C that has reliability 0.80. With this change, will the system reliability decrease? What is the new reliability

P23875 Energy Systems Assignment : P23875 Energy Systems Assignment Help and Solution, University of Portsmouth - Assessment Writing Service - You should consider several designs and advise

What Taylor Inventory balance at the beginning of October : With a T account, Taylor's Inventory balance at the beginning of October and the October transactions that affect this account

Interactions between each big data characteristic : Additional study must be performed on the interactions between each big data characteristic, as they do not exist separately but naturally interact

Efficacy of existing analytics techniques : The scalability and efficacy of existing analytics techniques being applied to big data must be empirically examined.

How much is the total financing revenue : The rate implicit on the lease is 9% and is accounted for as a direct financing lease. How much is total financing revenue to be earned throughout lease term

User Account

All Pages