One dimensional wall of material

Assignment Help Mechanical Engineering

Reference no: EM13720661

A one dimensional wall of material (Kw=10w/mk) is 50 mm thick with uniform heat generation q‘‘‘=5*10^6w/m^3. The left side is exposed to a fluid hl=500w/m^2k at 20 degree Celsius. The right side has a 10mm thick plate attached that has no heat generation (Kp=15w/mk). The right side of the plate is exposed to a fluid hr=1000w/m^2k at 30 degree Celsius. What are the temperature on the left edge of the wall, the maximum temperature in the wall, and the heat flux q'' in kw/m^2 going through the right side of the plate?

Reference no: EM13720661

Questions Cloud

Determine the work and heat transfer per unit mass : Water, initially a saturated vapor at 150 degrees Celsius, is contained in a piston-cylinder assembly. The water undergoes a polytrophic process (n=1) to a pressure of 0.01 MPa, during which the piston moves freely in the cylinder.

Phase diagram for a new binary alloy : A “friend” asks you to construct the phase diagram for a new binary alloy of A and B. The clues are: (i) A and B are completely immiscible in each other and no solid solutions exist in the diagram, (ii) no stoichiometric compounds exist in the diagra..

Developed a device that converts heat transferred : An inventor claims to have developed a device that converts heat transferred to it at 1500 degrees Fahrenheit into work with a thermal efficiency of 70%. Heat is rejected to the 70 degree Fahrenheit surroundings. Is this possible? Why or Why not?

What is the minimum thickness of the weld : Hemispherical end caps are welded to a cylindrical main body to form a propane storage tank. The tank has an inside diameter of d1=40in. and is to be subjected to a maximum internal pressure of p=120 psi. The allowable tensile stress in the wall of t..

One dimensional wall of material : A one dimensional wall of material (Kw=10w/mk) is 50 mm thick with uniform heat generation q‘‘‘=5*10^6w/m^3. The left side is exposed to a fluid hl=500w/m^2k at 20 degree Celsius. The right side has a 10mm thick plate attached that has no heat genera..

Temperature must air be heated in order to achieve lift off : A hot air balloon (approx as a sphere of diameter 50ft) is to lift a basket load of 600lbf. To what temperature must the air be heated in order to achieve lift off?

Isolated system consists of closed copper vessel of mass : An isolated system consists of a closed copper vessel of mass 0.1 kg, containing 1 kg of liquid water, each initially at 5°C, immersed in 20 kg of liquid water, initially at 20°C. The system is allowed to come to equilibrium.

Mass of the gas filling the erlenmeyer determined : The barometric pressure is reported to be 605.5 torr and the temperature of the water is 22.5 c what is the pressure of dry hydrogen gas in the eudiometer? How is the mass of the gas filling the Erlenmeyer determined?

Air undergoes an isentropic process : Air undergoes an isentropic process from P_1 = 100 kPA and T_1 = 300 K to a final state where the temperature is 700 K. Assuming an ideal gas, find P_2 using both the ideal gas tables and assuming a constant specific heat ratio at the average tempera..

User Account

All Pages