Obtain the runoff hydrograph from the entire catchment

Assignment Help Mechanical Engineering
Reference no: EM131066220

Problem 1. A hypothetical map for a rural catchment near Ballarat, Victoria is shown in Figure 1. Your task is to estimate the runoff hydrograph at the outlet of the catchment for a 10 year ARI.

1044_outflow.png

Note:

1. Make appropriate assumptions (and list these) regarding the impervious fraction of each sub-catchment area along with the initial losses and continuing losses;

2. Use approximate reach lengths between nodes (and list these) noting that sub-catchment nodes are at the centroid;

3. Use Geelong IFD data (to be obtained from www.bom.gov.au) to estimate the runoff ;

4. Obtain the runoff hydrograph from the entire catchment;

5. Check for time of concentration, tc, value and if it is unrealistic, adjust the K value in the model noting that the K value can be as high as 50 or 60.

6. Provide a graph of the hydrograph you obtain along with a tabular summary of your outputs.

Refer to the RORB user's manual for additional information. Software can be downloaded from: https://www.harconsulting.com.au/software/rorb/

Problem 2. Complete the example application described in Chapter 4 of the HEC RAS User's Manual Version 4.1 (January 2010) ** this document will be provided.

Software can be downloaded from: https://www.hec.usace.army.mil/software/hec-ras/downloads.aspx

Problem 3. Summarise your work for problems 1 and 2 in a brief and professionally presented report. This report should include an introduction, a summary of all assumptions made, neatly present the important results and also provide some conclusions to your work. The report should be no more than about 5 pages in length.

Include in your report some discussion around the limitations of both HEC RAS and RORB and suggest some alternative hydrological modelling software that could be used to solve similar types of problems. Specifically include some discussion on the REALM software and also the

Source Software.

REALM - https://www.depi.vic.gov.au/water/water-resource-reporting/surface-water-modelling/resource-allocation-model-realm

SOURCE - https://www.toolkit.net.au/tools/Source%20(public%20version)
Submissions must be made in electronic form

Reference no: EM131066220

Questions Cloud

Compliance and strategies for corporate growth : Fred is well known in his town for his homeopathic cough syrup. After years of encouragement, he has decided to take his miracle cough remedy to market as "Fred's Miracle Cough Syrup." While his cough syrup is homeopathic, one of the key ingredien..
Determinants of the raise in diabetes patients in pakistan : Title of Project/Dissertation: Determinants of the raise in Diabetes patients in Pakistan: Systematic review. Aim: This research intends in investigating the main determinants of the diabetes in Pakistan citizens and also aims in identifying the mai..
Two paragraphs on each of the following questions : Please write at least two paragraphs on each of the following questions. Each paragraph should consist of 4-5 full sentences, free of typographical, grammatical, and spelling errors.
Staffing issues that arise throughout the year : What are the staffing issues that arise throughout the year? What production needs must be met? How are high-demand/low-demand times managed? How are unexpected demands dealt with if any exist?
Obtain the runoff hydrograph from the entire catchment : Check for time of concentration, tc, value and if it is unrealistic, adjust the K value in the model noting that the K value can be as high as 50 or 60. Provide a graph of the hydrograph you obtain along with a tabular summary of your outputs.
Characteristics of the chief information officer : Define the fundamental responsibilities and key characteristics of the Chief Information Officer (CIO) and Chief Technology Officer (CTO) within health care organizations. Make one (1) recommendation where they can utilize their expertise to assis..
Evaluate ßfor the alternative p= 0.9 : Evaluate ßfor the alternative p= 0.9.
Define the term business management : Define the term business management in the context of businesses taking place in the society today and direct to the point.
What is the probability of the event : what is the probability of the event that she will win first? prize?

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Hole at the bottom of a very wide

How fast does water flow from a hole at the bottom of a very wide, 4.6-m-deep storage tank filled with water? Ignore viscosity.

  A sample is introduced into the chamber at 760 torr while

in many vacuum systems there is a gate valve consisting of a gasketed metal plate that acts to isolate the chamber

  A 4-ft concrete post is reinforced with four steel bars

a 4-ft concrete post is reinforced with four steel bars each with a 34 in. diameter. knowing that e of steel 29x106 psi

  Stress-strain relationship for alloy

Measurements on the surface of a deformed sheet after unloading indicate that e1 = 0.154 and e2 = 0.070. Assume that the von Mises criterion is appropriate and that the loading was proportional (i.e., the ratio α = σy/σxremained constant during loadi..

  After a few minutes it is observed that the bit is hot

a hand drill is used to drill a holbein a very hard material. because the bit is very dull it spins with out advancing.

  Low-velocity steam with negligible kinetic energy enters an

low-velocity steam with negligible kinetic energy enters an adiabatic nozzle at 300 c and 3 mpa. the steam leaves the

  If a car pasess point a with a speed of 20 ms and begins

if a car pasess point a with a speed of 20 ms and begins to increase its speed at a constatnt rate of atangential 0.5

  Steel is coated with thin layer pf ceramic to help protect

steel is coated with thin layer pf ceramic to help protect against corrosion. what do you expect to happen to the

  Calculate the cross-sectional area of a single micron

For any precipitation-hardened alloy, like an al-cu alloy, the strengthening of the alloy depends on the size and number of the precipitates. Calculate the cross-sectional area of a single 10-micron (10-5 m) diameter spherical precipitate. Determine ..

  In an experiment similar to the procedure set out for part

in an experiment similar to the procedure set out for part a of the calorimetry experiment 1.500 g of mgs was combined

  Assuming uniform deformation and volume constancy a

a tensile force of 8 kn is applied to the ends of a solid bar of 7.35 mm diameter. under load the diameter reduces to

  Heat is transferred to the refrigerant

A 5.23 ft3 rigid tank contains saturated refrigerant-134a at 100 psia. Initially, 12 percent of the volume is occupied by liquid and the rest by vapor. A valve at the top of the tank is now opened, and vapor is allowed to escape slowly from the tank...

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd