Objective mirror of the reflecting telescope

Assignment Help Physics

Reference no: EM13546681

The 200-inch-diameter objective mirror of the reflecting telescope at the Mt. Palomar Observatory has a focal length of 17 . Part A The -number of a mirror is defined exactly the same as the -number of a lens. What is the -number of this mirror?

Reference no: EM13546681

Questions Cloud

Find the discharge with an risk of being equaled or exceed : Find the discharge with an 80% risk of being equaled or exceeded at least once in the next 10 years. (Hint: first find the annual probability of exceedance for this discharge.)

Compute the ratio of the nominal flexural strength of the : Compute the ratio of the nominal flexural strength of the beam to the maximum service load moment, and compare your findings to the ACI load factors and strength reduction factor.

Derive an expression for acceleration in cylindrical : Perform this calculation using cylindrical coordinates. Cylindrical coordinates are the same as polar coordinates, with the addition of a third, z-axis.Recommend that the z-axis be placed up the axis of rotation for ?.

Compute the required weight of coarse aggregate per cubic : A concrete mix with a 3 inch slump, water cement ratio of 0.50 and sand with fineness modulus of 2.4 contains 1700 lb/yd^3 of coarse aggregate, compute the required weight of coarse aggregate per cubic yard

Objective mirror of the reflecting telescope : The 200-inch-diameter objective mirror of the reflecting telescope at the Mt. Palomar Observatory has a focal length of 17 . Part A The -number of a mirror is defined exactly the same as the -number of a lens. What is the -number of this mirror?

Find degree of saturation : A moist soil sample wights 346g.After drying at 105 degree celsius it then wights 284g.the specific gravity of the mass and of the soil is 1.86 and 2.70.

Equilibrium while the puck on the tabletop revolves : An air puck of mass m1 = 0.23 kg is tied to a string and allowed to revolve in a circle of radius R = 1.3 m on a frictionless horizontal table.

What total cylinder length l is required for the platform : The floating platform shown is supported at each corner by a hollow sealed cylinder 1 m in diameter. The platform itself weights 30kN in air, and each cylinder weighs 1.0 kN per meter of length

What force is applied to the lid : A 22.5 cm screwdriver is used to pry open a can of paint. If the axis of rotation is 2.29 cm from the end of the screwdriver blade and a force of 79 N is exerted at the end of the screwdriver’s handle, what force is applied to the lid? Answer in unit..

User Account

All Pages