User Account

All Pages

Neglect air and road friction

Assignment Help Mechanical Engineering
Reference no: EM13714367

A ford ranger with a mass of 2410 kg is traveling at a velocity of 65 mph down a mount ion road in Colorado. The brakes fail and the driver elects to use a "run away" truck tramp to stop the pickup. What distance in feet will it travel if the ramp has a 22%incline? Neglect air and road friction (gL=32ft/s^2)

Reference no: EM13714367

Questions Cloud

Engine in outer space which operates on the carnot cycle : An inventor claims to have developed a refrigeration unit with a COP of 8.5 which maintains the refrigerated space at -10oC while operating in a room where the temperature is 25oC. Can this claim be correct?
Find the resistance of each resistor : Two resistors connected in series have an equivalent resistance of 825.7 ohm. Find the resistance of each resistor
What is the magnitude of the magnetic field : A long straight wire carries a current of 190 mA. What is the magnitude of the magnetic field 25 cm from the wire
Draw a standard projection of white tin : Draw a standard (001) projection of white tin (tetragonal c/a=0.545), showing all poles of the form {001}, {100}, {110}, {011}, {111} and the important zone circles between them.
Neglect air and road friction : A ford ranger with a mass of 2410 kg is traveling at a velocity of 65 mph down a mount ion road in Colorado. The brakes fail and the driver elects to use a "run away" truck tramp to stop the pickup. What distance in feet will it travel if the ramp ha..
Determine how large a magnetic field is required : Alpha particles from a particular radioactive source have a speed of 1.65e7 m/s. How large a magnetic field is required to bend the path of the particles into a circle of 0.530 m radius
Constant-area duct is fed by a converging-only nozzle : A constant-area duct is fed by a converging-only nozzle. The nozzle receives air from a large chamber at p1=600 KPa and T1=550 K. The duct has a friction length of 5.3, and it is choked at the exit. What is the pressure at the end of the duct? If 80 ..
What is the maximum radial component of stress : Find the maximum shear stress in a 5 ½-in-diameter circular saw blade if it runs idle at 5000 rev/min. The saw is 14 gauge (0.0747 in) steel and is used on a 5/8-in-diameter arbor. The thickness is uniform. What is the maximum radial component of str..
Evaluate the magnitude of the magnetic force on the particle : A particle having an electric charge q = 3.20e-19 C is injected into a magnetic field B = 0.46 T with a speed of 6.90e6 m/s. What is the magnitude of the magnetic force on the particle

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Which emits more sox per unit amount of electricity

which emits more sox per unit amount of electricity produced a coal-fired plant with a 90 efficient so2 scrubber or an

  Evaluate maximum stress and total contraction of height

For a tall column resting on the ground, axial stress develops due to the columns weight. (a) Derive the stress as a function of position z measured from the bottom of the column, and the total contraction of the column.

  Find the reversible amount of of work per unit mass find

the air with constant properties in a steady adiabatic flow enters a system at a pressure of 10 bars and 500k with a

  What is the angle at which diffraction occurs in au from

what is the angle at which diffraction occurs in au from 101 using incident radiation with a wavelength of 1.54 adeg.

  Pressure in the radiator drops to 100kpa in 30 minutes by

a steam radiator in a well-insulated room 4m times 4m times 5m contains superheated vapor at 200kpa 200c. it has a

  Explain the stage efficiency

Steam at 15 bar and 350 degrees C is expanded through a 50% reaction turbine to a pressure of 0.14 bar. The stage efficiency is 80% for each stage and the reheat factor is 1.05.

  Design a network and vpn

Design a Network and VPN 1.Design a VPN between offices in Chicago, New York, and Washington D.C. Each site has 200 users.2.Explain how to connect the three LANs.

  Calculate the work necessary to compress air in an

calculate the work necessary to compress air in an insulated cylinder from a volume of 6 ft3 to a volume of 1.2 ft3.

  Calculate the convective heat transfer coefficient

air at a pressure of 200 kpa and free stream temperature of 27 degc flows over a square plate at a velocity of 30 ms.

  A rigid 10 m3 tank contains water initially at 120oc with

a rigid 1.0 m3 tank contains water initially at 120oc with 50 liquid and 50 vapor by volume. a pressure-relief valve on

  Two perfectely black squares 10 ft x 10 ft are spaced 20

two perfectely black squares 10 ft x 10 ft are spaced 20 feet apart. what is the net rate of heat exchange between them

  The shovels dimensions are a530 mm b 212mm c 318mm d106mm e

the shovels dimensions are a53.0 mm b 212mm. c 318mm. d106mm. e 371mm. find the reaction force at e. assume that the

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd