Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
Need to design a cantilever retaining wall 8m high, saturated unit weight is 16kn/m3, surcharge is 7kn/m2, load above wall supported on wall stem is 10 kn/m run, angle in internal friction is 35 dergre phi, delta in degree is 23.33, cohesion of clay under base is 35kn/m2,soil pressure is 125kn/m2.
A closed cylindrical tank filled with water has a hemispherical dome and is connected to an inverted piping system. The liquid in the top part of the piping system has a specific gravity of 0.68.
Assume excavation costs at $100/m3, side lining costs at $50/m2, and cover cost at 25/m2. Determine the dimensions of the pit that minimize cost -If the side slope is unconstrained and -If the side slope must me less than 450
The flywheel of a prototype car engine is under test. The angular position of the flywheel is given by x = (3.0rad/s3)t3 and the diameter of the flywheel is 36cm.
At the beginning of compression the pressure is 14 psi and the temperature if 60°F. The temperature at the end of combustion heat addition is 1500°F and the compression ratio is 9. Use constant specific heats at room temperature
A sag vertical curve along an existing vertical alignment begins at station 23+45 and ends at station 30+25. The initial grade coming into the curve is -2% and the grade out is +5%. What is the finished grade elevation on the curve at station
Writing case study about bridge collapse
A soil sample with specific gravity of solids 2.70 has a mass specific gravity of 1.84 Assuming the soil to be perfectly dry,Determine the void ratio.
A 1 cm diameter, 0.4 m long steel rod is to be used in an application where it will be subjected to an axial tensile force of 15kN. The factor of safety based on yield stress must be at least 1.5, and the axial deformation must not exceed 2 cm.
A MSW landfill is being designed to handle solid waste generated by Binford at a rate of 50 Mg/d. It is expected that the waste will be delivered by compactor truck on a 5d/week basis.
The letter size is such that the sign can be ready by a person with 20/20 vision from a distance of 200 ft. Does the subject driver have enough time to read the sign at a speed of 30 mi/h
If the steel is decarburized in vacuum at 1000 C for one hour, calculate the carbon concentration in steps of 0.2 mm as you go into the depth of the steel (starting with x=0 at the surface) until you reach the overall concentration of 0.3 wt % car..
A grain-size analysis for a uniform sand in a loose state indicated that the soil particle diameter corresponding to 10% passing on the grain-size distribution curve is 0.18 mm. Estimate the coefficient of permeability.
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd