Multiple access and the cellular principle

Assignment Help Electrical Engineering
Reference no: EM13866965

Multiple Access and the Cellular Principle

1. An analog cellular system has 250 duplex channels available (250 channels in each direction). To obtain acceptable transmission quality, the relation between reuse distance (D) and cell radius (R) has to be at least D/R = 7. The cell structure is designed with a cell radius of R = 2km.

During a busy hour, the traffic per subscriber is on average one call of 2-minute duration. The network setup is modeled as an Erlang-B loss system with the blocking probability limited to 3%.

(a) Calculate the following:

(i) The maximal number of subscribers per cell.

(ii) The capacity of the network in Erlangs/km2. (Assume that the cell area is Acell= πR2.)

(b) The analog system above is modernized for digital transmission. As a consequence, the channel separation has to be doubled - i.e., only 125 duplex are now available. However, digital transmission is less sensitive to interference and acceptable quality is obtained for D/R = 4. How is the capacity of the network affected by this modernization (in terms of Erlangs/km2)?

(c) To increase the capacity of the network in B, the cells are made smaller, with a radius of onlyR = 1 km. How much is capacity increased (in terms of Erlangs/km2) and how many more BSs are required to cover the same area?

2. A system specifies a blocking level to be less than 5% for 120 users each with an activity level of 10%. When a user is blocked, it is assumed to be cleared immediately - i.e., the system is anErlang-B system. Assume two scenarios: (i) one operator and (ii) three operators. How many channels are needed for the two scenarios?

Reference no: EM13866965

Questions Cloud

Five features of the system : Prepare a presentation in which you will highlight at least FIVE features of the system that have been/could be improved by the application of lean. Prepare a drawing of the system with the before and after analysis.
Question regarding the sunspension insulators : Explain on how the voltage can be distibuted over sunspension insulators and how string efficiency can be obtained?
Write a value-returning method namedreversedigit : Write a value-returning method namedreverseDigit, that takes an int (integer) as a parameter and returns the number with its digits reversed as an int. For example, callingreverseDigit(12345) returns the int value of 54321.
Calculations and the motivation for paul henley : What questions might you raise from an ethical perspective with respect to these calculations and the motivation for Paul Henley to include the DSS transaction in 2013?
Multiple access and the cellular principle : An analog cellular system has 250 duplex channels available (250 channels in each direction). To obtain acceptable transmission quality, the relation between reuse distance (D) and cell radius (R) has to be at least D/R = 7. The cell structure is d..
Write a program that illustrates packet routing at a router : Write a program that illustrates packet routing at a router. The program should accept as A text file containing a list of packets (with just destination addresses)
What types of financial shenanigans were used by the trio : What types of financial shenanigans were used by the trio to manipulate earnings? Do you agree with the decision of Judge Marrocco in not holding the trio legally liable? Why or why not?
Explain the controversy of establishing a court system : Explain the controversy of establishing a court system at the creation of the U.S. Constitution. Your responses must include the major elements of the controversy, the varying viewpoints for the needs for U.S. courts, and the ultimate outcome
Thickness for a unit working stress : A cast-iron cylinder of 300mm bore carries a pressure of 30 Newtons per squaremillimetre; what should be its thickness for a unit working stress of 25 newtons persquare millimetre?

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Find a minimum sum-of-products expression for f

F(a,b,c,d,e) = Σ m(0, 1, 2, 6, 7, 8, 16, 17, 19, 20, 25, 26, 29, 31) + Σ d(3, 5, 18, 27) (a) Find the essential prime implicants of F and indicate the minterm which makes each one essential.

  Explain the lti system with rational system function

Suppose we have a causal LTI system with rational system function H(s). We don't know H(s), but we do have the following information: i. When the input to the system is x(t) = u(t), the output y(t) is absolutely integrable.

  Design a fir filter that eliminates the frequency components

A speech signal with bandwidth B= 10 Khz is sampled at F2 = 20 KHz. Suppose that the signal is corrupted by four sinusoids with frequencies. F1 = 10,000 Hz ,F2 = 8889 Hz, F3 = 7778 Hz , F4 = 6667 Hz

  Find the speed-the ouput power and the torque

A shunt motor has the following ratings: 75 kW, 240 V, 1750 rpm, 300 A. The motor is supplied with 240 V source (constant) at its armature terminals. Its armature resistance is 0.0144 [O]. At rated current Ia = 300 A, the motor runs at rated speed..

  Draw the logic diagram to implement functions using gates

Draw the logic diagram to implement the following functions using AND and OR gates. Form a truth table for each and show the outputstate for each possible input combinations (notice that there are16 possible input combinations).

  Determine how much the bit rate of one is higher

When the bit rate of a message signal from the message sequence generator and the bit rate of a PN code from the multiple sequence generators are compared, which is higher

  Determine the voltage gain av

If R1 = 220 k Ohms , R2 = 56 k Ohms, Rc = 6.8 k Ohms, RE = 2.2 k Ohms, B= 180, rO = 50 k Ohms, C1 = C2 = 10 uF, CE = 100 uF, and Vcc = 20 V, determine the voltage gain AV.

  Determine the time required to obtain the desired thickness

A thermal oxide of thickness 120 nm needs to be grown on a silicon wafer (100) in dry oxygen. If the process integration issue requires having a temperature not higher than 1050 degreeC, determine the time required to obtain the desired thickness.

  Calculate conversion factor for converting voltage output

Through the data sheet the power meter is 4.5 HP. Find the hp range for PH-3A-HG in hp. The power meter measures the power and outputs a 0 - 10 voltage signal. Calculate the conversion factor for converting the voltage output from the sensor into ..

  Find the current flow if the time interval between t1 and t2

Given that the number of charges measured at t1 is n1 = 2.20×10^19, and the number of charges measured at t2 is n2 = 7.15×10^19. Find the current flow if the time interval between t1 and t2 is 2 s.

  Simply moving any switch should modify the lights status

A room has four doors and four light switches (one by each door). Sketch a circuit that allows the four switches to control the light - each switch should be able to turn the light on if it is currently off, and off if it is currently on.

  Determine when a overflow occurs

Design a circuit, and model using HDL that 1) adds two three bit unsigned binary numbers, 2) includes a flag to determine when a overflow occurs, and 3) includes a flag indicating whether the resulting sum is even or odd.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd