Measure the voltage across the inductor

Assignment Help MATLAB Programming

Reference no: EM133116679

Asynchronous buck converter setup and measurements Setup:

1. Before making any connection, make sure the kit is Power OFF.

2. Make the wiring as shown in Fig. 5 (with Lf = 1.2 mH).

3. Connect 60 Ω resistor as a load.

4. Connect 30 V DC Supply, make sure that the DC supply is initially set to 0 V.

5. Connect the Kit, XDS100V2 USB JTAG Emulator, and the host computer, with one end of the JTAG Emulator connected to J109 connector on the control board of the Kit and the other end connected to a USB port on the host computer. Note that the Kit must be Powered OFF, before connecting or disconnecting the JTAG Emulator.

6. Connect the USB RS485 adapter between the Kit and the host computer, with the communication end of the USB RS485 adapter connected to Pin 14/15 of Connector J5 on the control board and the USB end connected to the host computer.

7. Follow the wiring diagram as shown in Fig. 5 and check it finally with the lab tutor before any power ON.
8. Power ON the Kit through the 3-pin standard AC power cord with a single-phase 240 Vrms, 50 Hz source.

9. Open Matlab/Simulink code "BuckConverter_Asynchronous_2019.slx".

10. Press "Ctrl+B" on the keyboard to download the software code to the Kit.

11. Power OFF the Kit.

12. Disconnect the XDS100V2 USB JTAG Emulator.

13. Power ON the Kit through the 3-pin standard AC power cord with a single-phase 240 Vrms, 50 Hz source.

14. Open Matlab/Simulink file "Host_RS485_Communication_2019b.slx", and configure the right COM port for USB RS485 adapter on both blocks of "Serial Configuration" and "Serial Receive". This step may be skipped if the COM port is already configured properly. Press "Ctrl+T" on the keyboard to RUN.

15. Power ON the DC source. Then gradually increase the input DC supply voltage to 22 V and just turn on the external switch to connect the DC source.

16. Continue measurement and save waveforms and parameters, and observe the findings.

Measurement and Analysis:

Question 1: Measure the voltage across the inductor at D = 0.5, current through the inductor. Save waveforms. Note down the parameters used, e.g. D, Vin, Vo, fs, load etc.

Question 2: Change the inductor (Lf) to (1.2/2) mH and repeat Step 1. Save waveforms. Note down the parameters used, e.g. D, Vin, Vo, fs, load etc. Use L1 and L2 from the board (NOT L3!).

Question 3: Discuss what difference you found in Step 1 and Step 2 measurements? Why is it so? Explain.

Question 4: List other factors that force the converter to operate in DCM mode.

Attachment:- Advanced Power Electronics.rar

Reference no: EM133116679

Questions Cloud

Are there any careers in finance that might appeal to you : 1. Are there any careers in Finance that might appeal to you? Why?

Tirana stock exchange in albania : Tirana stock exchange in Albania, is it an opportunity or a necessity? Analyze your opinion.

Prepare the net position section of Shelburne statement : Lawn edging equipment with a carrying value of $6,200 was sold for $6,400. Prepare the net position section of Shelburne's statement of net position

How much more will you have in account : How much more will you have in your account on the day you retire if you can earn an average return of 10.85% rather than just 10.25%?

Measure the voltage across the inductor : Discuss what difference you found in Step 1 and Step 2 measurements - List other factors that force the converter to operate in DCM mode

Days sales outstanding and days inventory outstanding : Calculate the ratios for your chosen company for the two most recent years available in the financial statements.

What is the Enterprise Value of company B : We know that Company B issued 10,000 bonds (Q2) and has 86,000 shares of stock (Q3). If company B has $25 million in cash, what is Enterprise Value of company B

Determine the value of the stock : Determine the value of the stock. If the stock is currently trading at Rs.90, will you be interested in buying the stock?

Current financing plan of amazon inc : What is the current financing plan of Amazon Inc? What is the projected plan for the upcoming year?

User Account

All Pages