Many bridge designs today contain simple geometrical

Assignment Help Mechanical Engineering
Reference no: EM13347399

Many bridge designs today contain simple geometrical components but are constructed into complex ways to ensure that relevant base and safety loads are catered for. Bridges are multi- material solutions to withstand the static and dynamic loads that are exerted onto them.

This assignment consists of the following sections - all which must be addressed in your final report:

1. Design a bridge that will withstand 4 fully loaded semi-trailers (eg 2 going in each direction) at the central point, being aware of both static and dynamic loads, the span of the bridge will be 200 meters in length; width is whatever you determine it must be as suitable but limit yourself to two lanes.

2. Use a minimum of 2 materials and a maximum of 5 materials in your design, it can be any currently available material you choose, but you need to justify your selections.

3. Do not need to consider the connection of the bridge to ground, just assume a rigid stable connection.

4. In your report you need to include loading diagrams, stress analysis of at least 4 different sections of geometry using content developed through this subject plus other resources. 2 analysed sections must be where 2 materials are joining. As well as any engineering drawings that will be required to fully explain the joint.

5. This is a hand calculation based assignment thus no FEA will be accepted.

6. Keep geometry sections to simple, commercially available shapes.

Reference no: EM13347399

Questions Cloud

Question 1 - the table sets out the demand and supply : question 1 - the table sets out the demand and supply schedules for chewing gum.pricecents per packquantity
Lvmh moeumlt hennessy louis vuitton the worlds leading : lvmh moeumlt hennessy louis vuitton the worlds leading luxury products group recorded revenue of euro28.1 billion in
Anbsp build a student record managing system application by : a.nbsp build a student record managing system application by doing the following1.nbsp create a student inheritance
1 process solutions provides a computer-based document : 1 process solutions provides a computer-based document processing service. the accountant has produced the following
Many bridge designs today contain simple geometrical : many bridge designs today contain simple geometrical components but are constructed into complex ways to ensure that
Question 1 for each sentence below state whether the : question 1 for each sentence below state whether the modifiers that follow the verb are complements or adjuncts.i
Aimthe problem and implementing the design using principles : aimthe problem and implementing the design using principles of correct syntax program structure and
Question 1a identify trends or other patterns in inflation : question 1a identify trends or other patterns in inflation within the an economy of your choice over the last five 5
This report will examine in detail and explain the current : this report will examine in detail and explain the current strategy of a division of major australian corporation eg.

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Find the pitch diameter of the pinion

find: a) the pitch diameter of the pinion. b) the pitch diameter of the gear. c) the output torque of the gear. d) the minimum length of the key used to attach the gear?

  Sketch the passage shape

At a section in a passage, the pressure is 150 kPa (abs), the temperature is 10 deg C, and the speed is 120 m/s. For isentropic flow of air, determine the Mach number at the point where the pressure is 50 kPa (abs). Sketch the passage shape.

  Cooling and heating load estimate using camel program

Cooling and Heating Load Estimate using CAMEL program library and the data from DA-9

  What is the acceleration of the truck

What is the acceleration of the truck if the coupling at C suddenly fails? The car wheels are free to roll. Neglect the mass of the wheels.

  Determine the cop of the heat pump

Determine the COP of the heat pump that applies energy to a house at a rate of 4500kj/h for each kW of electric power it draws. Also, determine the rate of the energy absorption from the outdoor air.

  A constriction in a pipe will cause the velocity to rise

a constriction in a pipe will cause the velocity to rise and the pressure to fall at section 2 in the throat.nbspthe

  A circular specimen of mgo is loaded using a three point

a circular specimen of mgo is loaded using a three point bending mode. compute the minimumnbsppossible radius of the

  A total of 200 mol of a compound is allowed to react in a

a total of 2.00 mol of a compound is allowed to react in a foam coffee cup that contains 138 g of water. the reaction

  Plot contours of u-velocity and v-velocity

The velocity profiles at locations x=0.1, 0.30 and 0.5. Plot contours of u-velocity and v-velocity. How many iterations did it take to get your solution?

  What are the magnitude of f2 and f3

The magnitude of the horizontal(to the right) for F1 is 5kN and F1 + F2 + F3 = 0. What are the magnitude of F2 and F3?

  A 10 kw electric heater is used to heat 2 kg of air

a 10 kw electric heater is used to heat 2 kg of air contained in an insulated rigid tank from 400 kpa and 50 degc to

  What are different types of nuclear reactors

What are different types of Nuclear reactors in operation in thev world.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd