Make a temperature contour plot using matlab

Assignment Help Mechanical Engineering

Reference no: EM13713294

Consider a two- dimensional, straight triangular fin of Length L= 50mm and base thickness t= 20mm. The thermal conductivity of the fin is k= 25 W/mK. The base temperature is T_b= 50 degrees Celsius, and the fin is exposed to convection conditions characterized by h= 50 W/m^2 K. T_infinity= 20 degrees Celsius.

1) Using the finite difference mesh delta x= 10mm and delta y= 2mm, and taking advantage of symmetry, determine the fin efficiency.

2) Make a temperature contour plot using MATLAB

Reference no: EM13713294

Questions Cloud

Air conditioner maintains the temperature of a dwelling : An air conditioner maintains the temperature of a dwelling at 72 0F when it is 96 0F outside. If heat is transferred through the walls and ceiling at 35,000 BTU/hr. a) What is the minimum power required to run the air conditioner in hP and b) calcula..

Water is heated in a closed pot on top of a stove : Water is heated in a closed pot on top of a stove while being stirred by a paddle wheel. During the process, 30 kJ of heat is transferred to the water, and 5 kJ of heat is lost to the surrounding air. The work done amounts to 500 J. determine the fin..

Heat pump system is being designed to maintain a temperature : A heat pump system is being designed to maintain a temperature of 25 0C when it is 0 0C outside. Assuming the heat transfer from the walls and roof is 4,000 MJ, determine the minimum theoretical net work input required if the cold reservoir was a) th..

Must be invested now to allow withdrawals : An amount P must be invested now to allow withdrawals of $1,000 per year for the next 15 years and to permit $300 to be withdrawn starting at the end of year 6 and continuing over the remainder of the 15-year period as the $300 increases by 6% per ye..

Make a temperature contour plot using matlab : Consider a two- dimensional, straight triangular fin of Length L= 50mm and base thickness t= 20mm. The thermal conductivity of the fin is k= 25 W/mK. The base temperature is T_b= 50 degrees Celsius, and the fin is exposed to convection conditions cha..

Saturated steam is to be condensed on shell side of heat : Saturated Steam is to be condensed on the shell side of a heat exchanger at 75°F. Cooling water enters the tubes at 50°F at a rate of 45 lbm/s and leaves at 65°F. Assuming the heat exchanger to be well-insulated, determine the rate of heat transfer i..

Calculate the entropy change of the two reservoirs : Heat in the amount of 80 kJ is transferred directly form a hot reservoir at 985K to a cold reservoir at 280K. Calculate the entropy change of the two reservoirs and determine if the increase of entropy principle is satisfied kJ/K round to four decima..

Data for power cycle operating at steady state : Data for a power cycle operating at steady state between reservoirs at 1200 and 400 K is given. For each scenario determine the net power developed in kW and the thermal efficiency. Using the analytical form of the Claudius inequalities determine whe..

Determine the power required to drive the compressor : A certain industrial process requires a steady 0.75 kg/s supply of compressed air at 500 kPa, at a maximum temperature of 30C. This air is to be supplied by installing a compressor and after cooler. Local ambient conditions are 100 kPa, 20C. Using a ..

User Account

All Pages