List all possible ideal output levels

Assignment Help Electrical Engineering
Reference no: EM131384493

A 5-bit ADC has a full-scale voltage range of 0 to 5 V. The internal operation of the ADC is such that all code widths are equal. Also, the input digital signal is formatted using a unsigned binary number representation. List all possible ideal output levels. What is the LSB step size?

Reference no: EM131384493

Questions Cloud

Write an expression for the pdf of these measurements : A series of 100 measurements is made on the output of an opamp circuit whereby the distribution was found to be Gaussian with mean value of 12.5 mV and a standard deviation of 10 mV. Write an expression for the pdf of these measurements?
What is the measurement uncertainty of this meter : A meter is rated at 8-bits and has a full-scale range of ±5 V. What is the measurement uncertainty of this meter, assuming only quantization errors from an ideal meter ADC?
What is the average measured value : A 5-mV signal is measured with a meter 10 times, resulting in the following sequence of readings: 5 mV, 6 mV, 9 mV, 8 mV, 4 mV, 7 mV, 5 mV, 7 mV, 8 mV, 11 mV. What is the average measured value? What is the systematic error?
What assumptions do you need to make for conducting the test : Find the mean, standard deviation, skew ness coefficient, kurtosis coefficient, and interquartile range of the processing time after the process changes and comment on the values.
List all possible ideal output levels : The internal operation of the ADC is such that all code widths are equal. Also, the input digital signal is formatted using a unsigned binary number representation. List all possible ideal output levels. What is the LSB step size?
Compute the dnl curve for this dac : The ideal DAC output at code 0 is 0 V and the ideal gain is equal to 400 mV/bit. Answer the following questions assuming an endpoint-to-endpoint line is used as a reference.
What premium should company charge to make an average : Ignoring all other losses, what premium should the company charge to make an average net profit of 1.5% of the policy's face value?
What is the lsb step size : A 4-bit ADC has a full-scale voltage range of 10 to 10 V. The internal operation of the ADC is based on truncation and the input digital signal is formatted using a two's complement binary number representation. List all possible ideal output leve..
What is the probability of observing no more than 5 errors : What is the probability of observing no more than 5 errors in 2 hours of operation?- What is the probability of an error-free insertion (rolled throughput yield) in 2 hours of operation? In 3 hours of operation?

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Would si doped with arsenic be useful in the applications

A semiconductor device requires n-type material; it is to be operated at 400K. a) would Si doped with 10^15 atoms/cm^3 of Arsenic be useful in this applications. b) Could Ge doped with 10^15 cm^-3 antimony be used.

  Implement a high-speed multiplier which will multiply two

implement a high-speed multiplier which will multiply two 2-bit binary numbers b1b0 and c1c0 using a 16x4 prom lookup

  Find the treanstion width if the order of the filter

A design for high pass filter with butterworth characteristic is needed. Filter specification rewquire a cut-off frequency of 9 kHz for a sampling rate of 44 kHz, and a stop band attenuation of 40dB

  Find the minimum product-of-sums expression for the function

Construct a truth table for the following specifications: if any two consecutive switches out of four on-off switches in a row are on, then a light is on; otherwise, the light is off. Denote the switches in order as a, b, c, d,

  What is the maximum allowable noise at the amplifier output

A temperature transducer has the relationship R=200 + 10T where R is in ohms and T is in Celsius. The problem specifications are: Range is 30=T=50°C Resolution is 0.01°C Frequencies of interest are 0 to 100Hz Transducer dissipation constant is 20 mW..

  Does this package meet the requirement

An experimentalpackage and its support structure wh ich are to be place on board a space station act as an underdamped spring - mass system w ith a force constant of 2.1X106N/mand mass 108kg. Does this package meet the requirement

  Calculate the pressure the plates exert on the material

Assume the distance between the plates is small. Calculate the pressure the plates exert on the material between the plates.

  What would happen to the charge after it crosses resistors

a power source is giving 12 V to a circuit. In the circuit there is a resistor. Therefore, would the voltage drop 12 V when the charge moves across the resistor making there 0 V in the circuit after the resistor.

  How much of the inherent diversity gain can this scheme get

The optimal coherent receiver for repetition coding with L branches of diversity is a maximal ratio combiner. For implementation reasons, a simpler receiver one often builds is a selection combiner. It does detection based on the received signal a..

  What is the angular velocity of the sphere at the bottom

A solid sphere with a radius of 75 mm rolls (without slipping) down an inclined plane that is 5 m long. What is the angular velocity of the sphere at the bottom of the plane if it requires 10 seconds for it to reach the bottom

  Determine which frequencies will be the aliased one

a) Plot the spectrums for the range from 0 Hz to 25000 Hz. Make sure to label the frequncies. b) sketch the recoverd analog signal spectrum if an ideal lowpass filter with a cutoff frequncey of 4.5 kHzis used to filter the sampled signal.

  Determine the zero state response y1 of the system

A system is called complex if a real-valued input can produce a complex-valued output. Suppose a linear, time-invariant complex system has an impulse response of h(t)= j[u(-t+2)-u(-t)]

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd