Length of dislocation line per unit volume in material equal

Assignment Help Mechanical Engineering

Reference no: EM13709614

Which one of the following statements is true?

(a) The length of dislocation line per unit volume in a material equals the number of dislocations per unit area.

(b) Metals are hardened by cold working because many of the dislocations have passed right through the grains and are no longer available to facilitate slip.

(d) To avoid breaking a material when it is being cold worked, it is sufficient to perform the cold work in compression.

(e) To avoid breaking a material when it is being cold worked, it is necessary to perform the cold work in compression.

Reference no: EM13709614

Questions Cloud

Monthly payment if the mortgage is to be paid off : You are buying a home for $360000. If you make a down payment of $60000 ad take out a mortgage on the rest at 8.5% compounded monthly, what will be your monthly payment if the mortgage is to be paid off in 15 years?

Room is heated by a base-board resistance heater : Room is heated by a base-board resistance heater, which is designed to heat the air in this room from 8oC to 27 oC within 20 min. Approximating the room as a thermo-insulated cuboid 15m ? 10m ? 5m and assuming the specific heats to be constant at a r..

Yield strength for alloy that has average grain diameter : The yield strength for an alloy that has an average grain diameter of 4.4 x 10-2 mm is 115 MPa. At a grain diameter of 7.1 x 10-3 mm, the yield strength increases to 258 MPa. At what grain diameter, in mm, will the yield strength be 237 MPa?

Brass is higher than recrystallization temperature of copper : According to the Hall-Petch equation, Ostwald ripening follows the empirical rule. The recrystallization temperature of brass is higher than the recrystallization temperature of copper. The recrystallization temperature of bronze is lower than the re..

Length of dislocation line per unit volume in material equal : The length of dislocation line per unit volume in a material equals the number of dislocations per unit area. Metals are hardened by cold working because many of the dislocations have passed right through the grains and are no longer available to fac..

A piston-cylinder system initially contains an ideal gas : A piston-cylinder system initially contains an ideal gas at {State 1} After an isothermal expansion process, the pressure of the gas in the cylinder drops to P 2bar 2? Please draw a schematic of the process 1-2 on a

Calculate the post-deformation radius of the second specimen : Two fully annealed cylindrical specimens of an alloy are to be hardened by reducing their (always circular) cross-sections in an extrusion process. For one specimen, the initial and post-deformation radii are 15mm and 12 mm, respectively.

Assuming the casting approximates semi-infinite medium : A large plastic casting with thermal diffusivity 6.0 x10^7 m2 /s is removed from its mold at a uniform temperature of 150 degrees C. The casting is then exposed to a high-velocity air stream such that the surface experiences a sudden change in temper..

Stresses required to prevent vertical edges from displacing : Resolve the problem below with the vertical edges constrained from displacing in x direction, but free to displace vertically. Determine the vertical displacement of the top edge and the stresses required to prevent the vertical edges from displacing..

User Account

All Pages