Key features and structure of lte system

Assignment Help Other Engineering
Reference no: EM131661159

Digital Modulation Schemes used in Long-Term Evolution (LTE) Systems

Assignment Description:

The purpose of this assignment is to motivate students to understand the Long Term Evolution (LTE) system especially on digital modulation schemes used with multi-carrier modulation employed in the downlink of LTE cellular networks.

The LTE-Advanced standard has been adoptedworldwide as the fourth generation mobile communication technology. LTE systems use Orthogonal Frequency Division Multiplexing (OFDM) as the downlink radio access interface to support multiple users providing higher data rates comporedto 2G and 3G networks. OFDM provides better equalization capability to the LTE network to overcome channel fading effects which would be a major issue in previous single carrier systems when operated at high symbols rates. The use of multi carrier system also supports well the scalable bandwidths from 1.4 MHz to 20 MHz in LTE networks.

This project requires students to study the several types of modulation schemes used with OFDM technology in the downlink of LTE systems. Students are expected to discuss how various modulation schemes are chosen according to the required user data rate and channel conditions.

This assignment exposes the student to real-world applications of digital communication in mobile wireless communication. In doing so the student shall acquire skills to understand the real-world requirements, critically review the existing techniques and write a technical report based on his or her investigation.

Requirements

The student needs to write a report addressing the following areas:
- Introduction, key features and structure of LTE system.
- Analyze how digital modulation is adapted in OFDM technology according to the different channel conditions and user data rates?

Verified Expert

"The assignment is about LTE and OFDM. LTE is a prominent 4G mobile technology. On the other hand, OFDM is an important modulation technique used in LTE. OFDM allows high-speed data rate using multiple lower data rate channels. In this assignment different aspects of LTE, OFDM and the relationships between these two have been covered."

Reference no: EM131661159

Questions Cloud

Differences between an ionic bond and a covalent bond : 1. What are some differences between an ionic bond and a covalent bond?
Identify the multiple levels of system failure : Discuss to what extent the agencies have fulfilled their responsibilities to their mission and the original intent in creating such agencies.
Describe the most memorable organizational crisis for you : Describe the most memorable organizational crisis for you to date. Reflect and analyze on this past crisis. How was the crisis handled?
Define ebp without offending the seasoned nurses : Explain how you would educate the entire nursing staff on EBP without offending the seasoned nurses
Key features and structure of lte system : ME502 - Overview of Digital Communications - Digital Modulation Schemes used in Long-Term Evolution (LTE) Systems
What steps must bradley follow to pursue claim : Bradley claimed, however, that the store refused to hire him due to his disability. What steps must Bradley follow to pursue his claim?
Final volume of the solution in liters : A 500 mL graduated cylinder contain 295 mL of alcohol. If 15 cL of water are added to the cylinder, what is the final volume of the solution in liters?
Research findings in evidence-based practice : The purpose of this assignment is for the student to learn to assimilate, analyze, critique, and summarize an original research
Discuss the concepts of advocacy : Discuss the concepts of advocacy, lobbying, and social movement organizations in terms of their effects on service delivery.

Reviews

inf1661159

12/29/2017 5:06:46 AM

Expertsmind.Com is an organization I can trust in. They have profoundly qualified assignment help specialists, and they know about the tasks related all the stuffs. I will benefit their task help as opposed to hunting down different sites. Cool

len1661159

9/27/2017 8:11:50 AM

Marking criteria Section to be included in the report Description of the section Marks Introduction A high-level description as introduction demonstrating the understanding of the case study. 5 Literature review Identify different types of modulation schemes and symbol constellations sizes used in LTE downlink 20 Requirement Identify the advantages of OFDM technology, how different types of modulation schemes are supported by OFDM technology. 20

len1661159

9/27/2017 8:11:42 AM

Critical analysis Analyze how different modulation schemes are chosen according to the user requirement and channel conditions 25 Reference style IEEE 5 Conclusion Properly concluding remarks 5 Poor writing Inadequate structure, careless presentation, typos, or the report exceeds the word limit by more or less than 10% -30 Plagiarism Type of plagiarism - Copy from other students - Copy from internet source/textbook - Copy from other sources -80 Total 80

len1661159

9/27/2017 8:11:28 AM

Marking Rubric for Exercise Answers Grade Mark HD 80%+ D 70%-79% CR 60%-69% P 50%-59% Fail < 50% Excellent Very Good Good Satisfactory Unsatisfactory Evaluation Logic is clear and easy to follow with strong arguments Consistency logical and convincing Mostly consistent and convincing Adequate cohesion and conviction Argument is confused and disjointed Sophistication and effectivity The presented solution demonstrated an extreme degree of sophistication and effectivity to secure and/or manage WLAN The presented solution demonstrated a high degree of sophistication and effectivity to secure and/or manage WLAN The presented solution demonstrated an average degree of sophistication and effectivity to secure and/or manage WLAN The presented solution demonstrated a low degree of sophistication and effectivity to secure and/or manage WLAN The presented solution demonstrated a poor degree of sophistication and effectivity to secure and/or manage WLAN.

len1661159

9/27/2017 8:11:17 AM

Explanation All elements are present and well integrated. Components present with good cohesion Components present and mostly well integrated Most components present Lacks structure. Reference style Clear styles with excellent source of references. Clear referencing/ style Generally good referencing/style Unclear referencing/style Lacks consistency with many errors Report structure and report presentation Proper writing. Professionally presented Properly written, with some minor deficiencies Mostly good, but some structure or presentation problems Acceptable presentation Poor structure, careless presentation The End

len1661159

9/27/2017 8:11:03 AM

Submission Guidelines • All work must be submittedon Moodle by the due date along with a completed Assignment Cover Sheet. • The report will be automatically checked by Turnitin embedded on moodle. By submitting on MOODLE you agree that the work is yours unless properly cited. • The assignment must be in MS Word format, 1.5 spacing, 11-pt Calibri (Body) font and 2 cm margins on all four sides of your page with appropriate section headings. • Reference sources must be cited in the text of the report, and listed appropriately at the end in a reference list using IEEE referencing style. • For assignments 1 to 5 days late, a penalty of 10% (of total available marks) per day. • For assignments more than 5 days late, a penalty of 100% will apply.

Write a Review

Other Engineering Questions & Answers

  Computer and software purchases are capital expenditures

Computer and software purchases are capital expenditures, even though the expected useful lifetime of computer hardware and software has decreased in recent years because of rapid technological change.

  Explain possible heating processes materials have undergone

Explain the possible heating processes the materials could have undergone if the following microstructure is identified in a failure analysis. Widmanstatten ferrite and Degraded pearlitic-ferritic microstructure.

  Design a summing amplifier with three channels

Design a summing amplifier with three channels, using a 741C Op-Amp. The voltage gain of the should be 1.3, 2, and 4.7 for channel 1 to channel 3. Show the results for vout for all possible combinations of the channels in a table.

  Find the low-frequency gain am

Consider a bipolar cascode amplifier biased at a current of 1 mA. The transistors used have β = 100, ro = 100 KΩ , Cπ =10 pF, Cμ =2 pF, Ccs =0, and rx =50Ω. The amplifier is fed with a signal source having Rsig = 5 kΩ. The load resistance RL = 2 k..

  Find the dc value and the frequencies of the poles

A current-mirror-loaded MOS differential amplifier is biased with a current source I = 0.2 mA. The two NMOS transistors of the differential pair are operating atVOV = 0.2 V, and the PMOS devices of the mirror are operating at |VOV | = 0.2 V. The ..

  Define cephalocaudal and proximal-distal motor development

Define both cephalocaudal and proximal-distal motor development. Share how an understanding of these concepts can influence a parent's and teacher's support of an infants' and toddlers' motor development.

  Summarize the fly a kit slides

The fly a kit slides are attached. Make sure the write-up is in your own words (do not just cut and paste). Focus on the importance of SAP for industrial engineers assignme.

  Mark-recapture laboratory

This is a laboratory that simulates a population census technique commonly used by wildlife biologists in the field. The first step is to trap a random sample of animals of the desired species. These animals are then ear-tagged or marked in some o..

  Compute the allowable downward and upward load

These piles have been designed without the benefit of any onsite static load tests, dynamic tests or indicator piles, but a wave equation analysis has been performed. Using the Dennis and Olson method, compute the allowable downward and upward loa..

  Complete the truth table and circuit sketch for a decoder

EGCP 281- Complete the truth table and circuit sketch for a 3-to-8 decoder. Use a VHDL when or with-select statement to implement the 3-to-8 decoder from question 5.

  Compute flow in each pipe

Using the HAESTED Methods Software (water cad), and the available base map compute flow in each pipe, the pressure at each node and the HL in each pipe. The following design values should be used

  Provide a logic diagram that shows how a memr sometimes

provide a logic diagram that shows how a memr sometimes called oe signal and a memw signal can be generated from the

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd