Keep the average time spent in a queue

Assignment Help Civil Engineering
Reference no: EM132416480

Vehicles leave an airport parking facility (arrive at parking fee collection booths) at a rate of 500 veh/h (the time between arrivals is exponentially distributed). The parking facility has a policy that the average time a patron spends in a queue while waiting to pay for parking is not to exceed 5 seconds. If the time required to pay for parking is exponentially distributed with a mean of 15 seconds, what is the fewest number of payment processing booths that must be open to keep the average time spent in a queue less than 5 seconds

Reference no: EM132416480

Questions Cloud

Determine principal stresses and the orientation of planes : Determine the principal stresses and the orientation of these planes.
Determine for the crest and sag vertical curves : Two level sections of an east highway (G=0) are to be connected. Currently, the two sections of highway are seperated by a 4000-ft (horizontal distance)
What is on the network : What is on the network. The acceptable use policy or, for a workplace, the policy put out from the company
Determine a maximum safe speed : Determine a maximum safe speed (assuming current design standards) to the nearest 5 mi/h.
Keep the average time spent in a queue : What is the fewest number of payment processing booths that must be open to keep the average time spent in a queue less than 5 seconds
Freeway density and level of service : What will the freeway's density and level of service be before and after the ban? (Assume that the trucks are removed and all other traffic attributes are uncha
What is the process approach to knowledge management : What is the Process Approach to Knowledge Management and what is the Practice Approach to Knowledge Management?
Formulate the problem as an ip : Formulate the problem as an IP, and find the optimal solution.
Calculate the hourly volume and the phf : Given s = 0.30/(60-u), where s is the spacing in miles (mi) and u is the speed in miles per hour (mi/h), drive the relationships u - k, q - k, and u - q.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the discharge coefficient for the nozzle meter

An unknown fluid flows through a horizontal 35-mm-diameter pipe with a Reynolds number of 100,000 and a density of 680 kg/m3. The pressure drop across a 21-mm-diameter nozzle meter placed in the pipe is 4.2 kPa.

  Which compares qualitative and quantitative research designs

choose two research papers - one quantitative and the other qualitative - from the construction management literature. Write a paper which discusses in detail the extent to which the authors of your papers followed in their own work the principles ..

  Determine how much heat is transferred to the egg

Taking the properties of the egg to be p=1020 kg/m3 and cp 3.32 kJ/kg · °C, determine how much heat is transferred to the egg by the time the average temperature of the egg rises to 80°C.

  Calculate the speed at impact to a driver at a distance

A large rock became visible to a driver at a distance of 175 ft. Assuming a perception-reaction time of 0.8 s, an initial speed of 42 mi/h, a coefficient of friction of 0.5, and a level roadway, calculate the speed at impact.

  What is the loss of energy through the jump

In a rectangular channel of 12 m width, water flows at a rate of 150 cms. At the end of the channel, there is a horizontal concrete apron of 12 m width, on which the water depth is 3 m. Will a hydraulic jump formed in the channel and why? What is the..

  Find the capacity of the column with 1% reingforcement

A circulatr concrete column with a diameter of 8" has spiral reinforcing. Find the capacity of the column with 1% reingforcement. Find the capacity of the column with 8% reinforcement.

  How much lime must be added to react with the alum

If 110 mg/L Alum (Al2(SO4)3 14H2O) is added to water containing a natural alkalinity of 20 mg/L as CaCO3, 1) how much lime (mg/L as CaO) must be added to react with the alum 2) How much precipitate (mg/L as Al(OH)3 ) is formed

  Difference between between adjacent layers

ince for large N (number of layers) the local radiation heat transfer becomes independent of the presence of the far-away layers, we can then use the local (or diffusion) approximation of radiation heat transfer and use the temperature difference ..

  A lower tank contains water while an upper tank contains

a lower tank contains water while an upper tank contains air with a negligible concentration of water vapor. a tube

  Determined from the equilibrium data to be percent by mass

a mild steel component in a form of a finite slab with a thickness of 2L=2.5 mm is to be hardened by packing it in a carbonaceous material in a furnace for a predetermined time. the uniform initial carbon concentration of the slab is 0.15 percent ..

  Determine the factor of safety with respect to shear failure

A footing 3m X 3m carries a pressure of 500 kN/ m2 at a depth of 1m in a sand substrate. The saturated unit weight of the sand is 20 kN/ m3 and the unit weight above the water table is 18 kN/ m3

  What are the internal loads supported at the shoulders

This 140 lb gymnast supports himself with arms stretched out in the iron-cross position shown. Say the arms each weigh 10% of the body weight (and have approximately uniform distribution of mass), and that each ring exerts only an upward force on ..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd