It collides and sticks to an identical stick with an

Reference no: EM13632366

On a frictionless horizontal table, a stick of mass m and length L spins around a pivot at one of its ends with angular frequence w. It collides and sticks to an identical stick, with an overlap length equal to x. Immediately before the collision, the pivot is removed. What should x be so that after the collision the double-stick system has translational but no rotational motion?

Reference no: EM13632366

Questions Cloud

What is the maximum speed at which a 234-kg car can safely : what is the maximum speed at which a 234-kg car can safely travel if the radius of the track is 80 m and the

Assuming the process operates 8500 hours per year calculate : a stream of gas flowing at 15000 scfm contains 20 ppm of toluene. assuming the process operates 8500 hours per year

A rankine steam power plant should operate with a high : a rankine steam power plant should operate with a high pressure of 3 mpa a low pressure of 10 kpa and the boiler exit

The facility is required to collect all the vented air and : an alcohol manufacturing facility emits air with 500 ppm ethanol. the air flows out several roof vents at a total flow

It collides and sticks to an identical stick with an : on a frictionless horizontal table a stick of mass m and length l spins around a pivot at one of its ends with angular

Several years of study by dedicated researchers have shown : several years of study by dedicated researchers have shown that on average 4 sharks per month can be found in an area

Estimate the concentration in ppm and the mass emission : estimate the concentration in ppm and the mass emission rate of nox in kghr expressed as no if a coal containing 1.5

A flow of 4 kgs ammonia goes through a device in a : a flow of 4 kgs ammonia goes through a device in a polytropic process with an inlet state of 150 kpa -20degc and an

Estimate the nominal size of the smallest sae grade 1 : estimate the nominal size of the smallest sae grade 1 standard unc bolt that will not yield under a tightening torque

User Account

All Pages