Is this level dangerous to the fish population

Assignment Help Civil Engineering
Reference no: EM13540138

A lake has a volume of 750,000 m3 (dimensions 15 m deep, 100 m wide, and 500 m long) and behaves as two completly mixed cells. Cell 1 makes up 40% of the lake ( dimensions 15 m deep, 100 m wide, and 200 m long) cell 2 makes up 60% of the lake (dimensions 15 m deep, 100 m wide, and 300 m long). the flow into the lake is from is from a stream is 300 m3/d andthe flow into the lake from runoff averages 20 m3/d. The lake is used for fishing by the local residents but the pesticides from local farms may damage the fish population. the stream and runoffboth carry pesticides from the local farms. Assume the runoff enters the lake uniformly around the edges. The stream has a concentration of 0.2 g/m3 and the run off has a concentration of 0.5 g/m3. the pesticide decays at a rate of 0.0001/d and is known to be toxic to fish at a concentration of 0.05 g/m3. Neglecting the the width of the streams, the lake has a permieter of 1200 m (500 m + 500 m +100 m + 100 m). So the lake recieves 20 m3/day over 1200 m perimeter. Now compute the percentages of the total runoff going into cell 1 and cell 2 based on the percentages of the perimeter each recieves runoff from.

Using the completly mixed model, estimate the pesticide concetration in the lake. Is this level dangerous to the fish population?

Reference no: EM13540138

Questions Cloud

Find the stress in the cable when the truck comes : A tow truck is using a cable to pull a car up a 15 degree hill. If the car weighs 4000 lbs and the cable has a diameter of .75 inches, find the stress in the cable when the truck comes to a stop while on the hill. Ignore friction between the car and ..
Will the pesticides threaten the fish population during the : In the summer, the density at the top of the lake is 997 kg/m3, and at the bottom is 1000 kg/m3. Would you predict stratification to be present, and if so assume an epilimnion depth of 4m. Will the pesticides threaten the fish population during the s..
How fast will the sleeve slide down the rod : A sleeve 30 cm long encases a vertical rod 2.5 cm in diameter with uniform radial clearance of 0.005 cm. when the sleeve and the rod are immersed in a pool of oil with dynamic viscosity
Select the required commercial size of the rod required to : Two forces are applied as shown to hook support. Knowing that the magnitude of P is 35 N, determine by trigonometry (a) the required angle a if the resultant R of the two forces applied to the support is to be horizontal, (b) the corresponding magnit..
Is this level dangerous to the fish population : A lake has a volume of 750,000 m3 (dimensions 15 m deep, 100 m wide, and 500 m long) and behaves as two completly mixed cells. Cell 1 makes up 40% of the lake ( dimensions 15 m deep, 100 m wide, and 200 m long) cell 2 makes up 60% of the lake (dimens..
Computer the percent voids in total mix : An aggregate blend is composed of 53% coarse aggregate by weight (sp. gr. 2.702), 43% fine aggregate (sp. gr. 2.621), and 4% filler (sp. gr. 2.779)/ The compacted specimen contains 6% asphalt binder (sp. gr. 1.052) by weight of total mix, and has a b..
What are the normal stresses in the bars afterward : Two aluminium bars (E = 70 GPa) are attached to regid support at the left and a cross-bar at the end. An iron bar (E = 200 GPa) is at attached to the rigid support at the left and there is a gap b = 0.6 mm between the right end of the iron bar and cr..
If the bearing stress on the concrete pedestal must not : If the allowable stress in the cylinder is 55 MPa, what is the maximum internal diameter (nearest integer, such as 10, 11, 12, …., in units of millimetres) of the cylinder?
Describe how you analysed and defined a problem : Describe how you analysed and defined a problem and identified the engineering knowledge and skills required for solving the problem?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Find the angular acceleration of the plate at the instant

An external moment of magnitude 110 N-m is applied in the counter clockwise direction as shown. A frictional moment of magnitude 10 N-m resists the rotation. The specific weight of the material is 250 lbs / ft3.

  Calculate critical crack length required to cause fracture

We know that the part has an intial crack of length 0.02 mm, and that the fracture toughness is 55 MPA(m)^1/2If the part is subject to cycle loading of 300 Mpa in tension and compression, calculate (assuming Y1.2, n = 3.4 and C = 2x10^-11 in units ..

  What is the magnitude of shaft work obtained

If the amount of heat transfer in the HE unit is 2460 kJ per kg of steam, what is the magnitude of shaft work obtained from the turbine in kW?

  Determine the speed of the motorcyclist at the instant

While traveling around the curved path, the motorcyclist increases speed by 1.25ft/s^2 . Part A - Finding the time interval for the motorcyclist to reach a given acceleration If the motorcyclist starts from rest

  Calculate what is the maximum water hammer pressure

A 0.5 m diameter concrete pipe (5.0 cm wall thickness with rigid pipe walls) carries water 600 m before discharging it into another reservoir. The surface elevation of the downstream resevoir is 55 m lower

  Calculate the power provided by the rocket motors

Two small liquid-propellant rocket motors are mounted at the tips of a helicopter rotor to augment power under emergency conditions. The diameter of the helicopter rotor is 7m, and it rotates at 1 rev/s.

  What percentage area of the basin was contributing runoff

The ordinate of a5-hr unit hydrograph of a basin is determined equal to 300 cfs at atime 4 hours after the beginning of net rainfall. What would be therunoff rate after 4 hours if a storm of uniform intensity

  Compute the required weight of the aggregate per cubic yard

Concrete mix with a 3 in slump, w/c ratio of .5, and sand with a fineness modulus of 2.4 contains 1700 lb of coarse aggregate.

  Calculate the deflection of the beam to check

Also calculate the deflection of the beam to check that it complies with the design limit of L/200. Only variable actions are required for deflection check.

  What are the reactions-shear forces and bending moments

If you have 10 kips acting downward on a foundation and footing, 4 feet long, with uniformly distributed load acting up ward of 2.5 k/ft (soil) also 4 ft long. what are the reactions, shear forces, and bending moments at the tree critical points

  Calculate the change in temperature of the air in the room

Incandescent light bulbs have been phased out in the US because they are very inefficient (i.e., they produce a very large amount of heat). A 10 W light-emitting diode lamp (LED) can produce about the same light output as incandescent light bulbs

  What is the exit pressure p2 if friction head loss is 350 ft

Water ?ows at 6 ft/ s through a pipe 500 ft long with diameter 1 in. The inlet pressure p1= 200 psig, and the exit section is 100 ft ft higher than the inlet.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd