Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
Iron and vanadium both have the BCC crystal structure and V forms a substitutional solid solution in Fe for concentrations up to approximately 20 wt% V at room temperature. Determine the concentration in weight percent of V that must be added to iron to yield a unit cell edge length of 0.289 nm.
The following data are taken: RU=130.0m, RS=120.0m, ST=90.0m, angle RST= 115 degrees, and angle RUT= 100 degrees. Calculate the length of side UT and the area of the plot.
A landfill is located 500 km from a river whose surface elevation is 40 m lower than the ground elevation at the landfill. After several years it is discovered that leachate from the landfill, with a COD of 1300 mg/L, is leaking into the river.
A crop has a consumptive use requirement of 1.2 acre-ft of water per acre of crop land. The crop is planted on 780 acres. Precipitation is 3.2 inches. The remainder of the 1.2 ac-ft/ac requirement is met by irrigation.
Determine the size (liters/hour) of a proportioning pump to feed ferric chloride for a 0.438 m^3/s water treatment plant. The optimum dose selected is 50 mg/L.
a gate having a cross section closes an opening 5 ft wide and 4 ft high in a water reservoir. its center of gravity is one foot to the left of AC and 2 ft above BC. Determine horizontal reaction developed on the gate at C.
Prepare and tabulate the design aid for partial flow as per the equations for interpolation of velocity and diameter for corresponding flows.
What are the effects of hardness, hot strength and hot hardness and work hardening of work materials
Determine the mass and specific volume of argon gas in a vessel at 150 kPa and 20°C. The vessel is spherical, with radius 5 m.^5
A trapezoidal channel lined with d50 = 10 cm has a bottom width of b = 1.2 m, side slopes of m = 3, and a longitudinal bottom slope of S0 = 0.008. Determine the normal depth and the Froude number for Q = 1.4 m3/s.
A horizontal curve on a single-lane highway has its PC at station 124 + 10 and its PI at station 131 + 40. The curve has a superelvation of 0.06 ft/ft and is designed for 70 mi/h. What is the station of the PT?
If the 10-lb block passes point A on the smooth track with a speed of va = 5 ft/s determine the normal reaction on the block when it reaches point b.
What superelevation rate would you recommend for a roadway with a design speed of 100 km/hr and a radius of curvature of 500 m? Assume f = 0.11.
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd