In heavy duty diesel engine dynamometer testing the

Assignment Help Mechanical Engineering
Reference no: EM13631844

In heavy duty diesel engine dynamometer testing, the air-to-air intercooler is replaced with a liquid-to-air heat exchanger. In the laboratory heat exchanger, air enters one side of the exchanger at a rate of 1000 L/s, 400K, 2.5atm and exits at 325K. Water enters the other side of the exchanger at 1.5 L/s, 25 degree Celsius and 3atm. Neglecting any pressure drop through the exchanger.

A) Determine the rate of heat transfer (kW) between the air and water.

B) Determine the rate of entropy generation (kW/K)

Reference no: EM13631844

Questions Cloud

A brayton cycle is the same as the rankine cycle but it : a brayton cycle is the same as the rankine cycle but it takes place in the ideal gas region of states. a large
Air an ideal gas contained in a rigid insulated tank fitted : air an ideal gas contained in a rigid insulated tank fitted with a paddle wheel initially at 27 degrees celcius 2 bar
The combustion gases modeled as air enter a turbine at : the combustion gases modeled as air enter a turbine at 6atm 1000k and exits at 1atm 500k. determine the isentropic
One kilogram of water contained in a sealed piston-cylinder : one kilogram of water contained in a sealed piston-cylinder assembly initially at 160degc and 200 kpa undergoes an
In heavy duty diesel engine dynamometer testing the : in heavy duty diesel engine dynamometer testing the air-to-air intercooler is replaced with a liquid-to-air heat
A 75 kg swimmer dives horizontally off a 500 kg raft if the : a 75 kg swimmer dives horizontally off a 500 kg raft. if the divers speed immediately after leaving the raft is 4 ms
A 2500-kg truck moving at 10 ms strikes a car waiting at a : a 2500-kg truck moving at 10 ms strikes a car waiting at a traffic light hooking bumpers. the two continue to move
A gage pressure of 400 kpa acting on a 4-cm diameter : a gage pressure of 400 kpa acting on a 4-cm diameter piston is resisted by an 800-nm spring. how much is the spring
Determine the power input to the compressor for a mass flow : air enters a two-stage compressor at 100 kpa and 27 degrees c and is compressed to 625 kpa. the pressure ration across

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  A refrigerator is to remove heat from the cooled space at a

a refrigerator is to remove heat from the cooled space at a rate of 2300 kjmin to maintain it temperature

  What is the maximum height reached by the rocket b how long

a model rocket is launched straight upward with a speed of 50 ms. i accelerates with a constant upward acceleration of

  The old style heating uses steam or hot water in an

the old style heating uses steam or hot water in an radiator to heat a room in winter time. a radiator can be

  Calculate the cross sectional area in mm2 calculate the

the diameter of a round wire is d in mm. put d 3.00 mm using d 3.00mm and calculate the following calculate the cross

  If the final pressure is 100 kpa determine the work done

an ideal gas is compressed from a volume of 400 cm3 to a volume of 150 cm3 slowly and isothermally in a

  How thick a layer of insulation of thermal conductivity 02

a 1 inch schedule 10 copper pipe carries 10 gpm of brine at -5 degrees c. the ambient air is at 20 degrees c and has a

  A horizontal 500 lb force performs at a point d of

a horizontal 500 lb force performs at a point d of crankshaft ab which is held in static equilibrium by a twisting

  Determine the air velocity at the exit when the inlet

. the exhaust nozzle of a jet engine expands air at 300kpa and 200oc adiabatically to 100kpa. determine the air

  What is the change of energy stored in the battery

A 12 Volt battery is charged by supplying 3 Amps over a period of 6 hours. What is the change of energy stored in the battery if the battery loses 400kJ of heat during charging.

  Determine the diffusion time required at 600oc the

the wear resistance of a steel shaft is to be improved by nitrogen hardening of its surface. the initial nitrogen

  Determine the final velocity of each car after all impacts

at an amusement park there are 200-kg bumper cars a b and c that have riders with masses of 40 kg 60 kg and 35 kg

  Determine the work produce

Refrigerant 134a at 700 kPa and 40oC is expanded adiabatically in a closed system to 60 kPa. Determine the work produced, in kJ/kg, and final enthalpy for an isentropic expansion efficiency of 80.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd