In addition to the analysis that you presented in a what

Assignment Help Chemistry

Reference no: EM13645550

Manufacturing process that unintentionally introduces cracks to the surface of a part was used to produce load-bearing components. The design requires that the component be able to withstand a stress of 450 MPa. The component failed catastrophically in service.

You are a failure analysis engineer who must determine whether the component failed due to an overload in service or flaws from the manufacturing process. The manufacturer claims that the components were polished to remove the cracks and inspected to ensure that no surface cracks were larger than 0.5 mm. The manufacturer believes the component failed due to operator error. It has been independently verified that the 5-cm diameter part was subjected to a tensile load of 1MN (10^6 N). The material from which the component is made has a fracture toughness of 75 MPa (m) ½ and an ultimate tensile strength of 600 MPa. Assume external cracks for which f =1.12.

a) Who is at fault for the component failure, the manufacturer or the operator? Show your work for both cases.

b) In addition to the analysis that you presented in (a), what features might you look for on the fracture surfaces to support your conclusion?

Reference no: EM13645550

Questions Cloud

A349 kg 2533 cm diameter turntable rotates at 221 rpm on : a 3.49 kg 25.33 cm diameter turntable rotates at 221 rpm on frictionless bearings. two 700 g blocks fall from above hit

What is the magnitude of the force applied by the path to : a cyclist is moving around a curved and banked path at a constant speed of 16 mph. the bicycle and rider have a

The speed of the first block immediately afterward is 505 : two 491 g blocks of wood are 1.63 m apart on a frictionless table. a 10.67 g bullet is fired at 415 ms toward the

As noted in the chapter the cosmic microwave background : as noted in the chapter the cosmic microwave background radiation fits the planck equations for a blackbody at 2.7 k.a

In addition to the analysis that you presented in a what : manufacturing process that unintentionally introduces cracks to the surface of a part was used to produce load-bearing

A second identical billiard ball is shot west at 104 ms the : one billiard ball is shot east at 2.19 ms. a second identical billiard ball is shot west at 1.04 ms. the balls have a

As the water is heated the piston expands 3 cm upwards at : a 2 phase liquid-vapor mixture of water initially with a quality of 25 is contained in a piston-cylinder. the piston

Two ice skaters with masses of 535 kg and 759 kg are at the : two ice skaters with masses of 53.5 kg and 75.9 kg are at the center of a 56.28-m-diameter circular rink. the skaters

Write a program that accepts a numerical value x from 0 to : write a program that accepts a numerical value x from 0 to 100 as input and cmputes and displays the corresponding

User Account

All Pages