If the ground water enters the condenser at 10 degree c 50

Assignment Help Mechanical Engineering
Reference no: EM13638963

A ground-coupled heat pump operates on the ideal vapor-compression cycle with refrigerant 134-a as the working fluid. This heat pump has a SEER equal to 15 m this cooling mode and maintains a space at 25 degree C w hen absorbing heat from the space at the rate of 18 kW in the evaporator. The evaporator operates at 20 degree C. and the condenser operates at 1400 kPa. Ground water taken from a well at the rate of 0.32 kg s (equivalent to a volume flow rate of approximately 5 gal mm) absorbs the heat transferred from the refrigerant in the condenser. Sketch the hardware for the cycle showing all energy interactions for the components. Sketch the T-s diagram for the cycle. If the ground water enters the condenser at 10 degree C (50 degree F), what will be the temperature of the cooling water as it is returned to the ground, in C? Assume Cp = 4.18 kJ/kg k for cooling water.

Reference no: EM13638963

Questions Cloud

An empty parallel plate capacitor is connected between the : an empty parallel plate capacitor is connected between the terminals of a 8.92-v battery and charges up. the capacitor
A parallel-plate capacitor is charged to a potential : a parallel-plate capacitor is charged to a potential difference of 120v. the area on each plate is 120cm2 and the
For socl2 from step 3 to step 4 how do we know when toadd : for socl2 from step 3 to step 4 how do we know when toadd in another bond to form a double bond between the o and
An electron is initially at rest in a uniform electric : an electron is initially at rest in a uniform electric field of intensity 1400 nc.find the followinga its acceleration
If the ground water enters the condenser at 10 degree c 50 : a ground-coupled heat pump operates on the ideal vapor-compression cycle with refrigerant 134-a as the working fluid.
The electric potential at points in an xy plane is given by : the electric potential at points in an xy plane is given by v 1.6 vm2x2 -3.5 vm2y2. what are a the magnitude of the
What mass of sodium chloride would need to be added to the : what mass of sodium chloride would need to be added to the blood to bring the sodium ion concentration up to 0.137 m
Compare the cop for this refrigeration cycle with the cop : a refrigeration cycle uses refrigerant 134-a as the working fluid. the refrigerant leaves the evaporator as a saturated
It then sails from the second island to the third island : a ferry transports tourists among three islands. it sails from the first island to the second island 4.17 km away in a

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Ii is to be mounted on a solid steel shaft with a heavy

a spacer made of aisi 1020 hot-rolled steel is in the form of a hollow cylinder with a nominal inside diameter of 3.25

  Determine the head loss associated with the pump if the

a 1 hp electric motor drives a water pump. the pump volumetric flow rate is 2103 m3s at 300 k.a determine the head loss

  Determine the strains in thick walled cylindrical vessel

Cylinder problem, Determine the strains in thick walled cylindrical vessel with inside diameter 1000 mm and outside diameter of 1400 mm

  What is the change in enthalpy in kjkg of oxygen as its

what is the change in enthalpy in kjkg of oxygen as its temperature changes from 150 to 200oc? is there any difference

  If 20 kgs flows out of the condenser what is the mass flow

an open feedwater hearter operating at steady state accepts superheated steam at 500kpa and 200degc and mixes the

  What is the effect of immersion depth

What is the effect of immersion depth on a glass electrode and what aspects of the design of a pH electrode installation would lead to reduced manual maintenance and improved reliability

  10 kg of water in a piston cylinder exists as a saturated

10 kg of water in a piston cylinder exists as a saturated mixture at 120 kpa with quality 40. the water is now heated

  Determine the tension in the cable

The bent rod ABDE is supported by ball-and- socket joint at A and E and by the cable DF. If a 600-N load is applied at C as shown , determine the tension in the cable.

  The arguement of the sine are in radians and t is in

a particle is moving along a circular path having a radius of 5.7 in. such that its position as a function of time is

  Determine the magnitude of its total accleration

determine the magnitude of its total accleration when (a) t=0 and (b) t=2 Whats the solution.

  Determine the force that will produce an elastic reduction

A cylindrical bar of aluminum 19 mm (0.75 in) in diameter is to be deformed elastically by application of a force along the bar axis. Using E=10 psi (Modulus of Elasticity), determine the force that will produce an elastic reduction of 1e-4 in. in..

  For the diffuser shown in the attached image find the mass

a diffuser is a device that the flow of air in order to recover a pressure loss. for the diffuser shown in the attached

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd