If one body is positively charged and another body is

Assignment Help Electrical Engineering
Reference no: EM13383372

If one body is positively charged and another body is negatively charged, free electrons tend to
A. move from the negatively charged body to the positively charged body.
B. move from the positively charged body to the negatively charged body.
C. remain in the negatively charged body.
D. remain in the positively charged body.

2. A battery consists of five dry cells connected in series. If the voltage developed by each cell is 1.5 V, the total voltage developed by the battery is
A. 0.3 V.
B. 1.5 V.
C. 5.0 V.
D. 7.5 V.

3. The grid in a high-vacuum triode is usually kept negatively charged with respect to the cathode so that the electrons may be
A. accelerated toward the anode.
B. accelerated toward the cathode.
C. attracted to the anode instead of the grid.
D. attracted to the cathode instead of the grid.

4. An example of an atom that has no charge is one that has
A. 2 protons, 2 electrons, and 1 neutron.
B. 1 proton, 2 electrons, and 3 neutrons.
C. 3 protons, 1 electron, and 3 neutrons.
D. 3 protons, 2 electrons, and 1 neutron.

5. If an electrically uncharged body is contacted by an electrically charged body, the uncharged body will
A. develop the opposite charge as the charged body.
B. remain a neutrally charged body.
C. develop the same charge as the charged body.
D. neutralize the charged body.

6. What bias conditions must be present for the normal operation of a transistor amplifier?
A. The emitter-base junction must be reverse biased, and the collector-base junction must be forward biased.
B. The emitter-base junction must be forward biased, and the collector-base junction must be reverse biased.
C. Both junctions must be reverse biased.
D. Both junctions must be forward biased.

7. When an electric current flows through a long conductor, each free electron moves
A. from one end of the conductor to the other end.
B. with a speed of 300,000,000 m/s.
C. back and forth between the ends of the conductor.
D. through a relatively short distance.

8. If the resistance of an electric circuit is 12 ohms and the voltage in the circuit is 60 V, the current flowing through the circuit is
A. 0.2 A.
B. 5 A.
C. 60 A.
D. 720 A.

9. Electrons are emitted from a conductor when the conductor is
A. exposed to weak light.
B. cooled rapidly.
C. bombarded by high-speed electrons.
D. subjected to a small voltage.

10. A circuit contains two devices that are connected in parallel. If the resistance of one of these devices is 12 ohms and the resistance of the other device is 4 ohms, the total resistance of the two devices is
A. 0.0625 ohms.
B. 0.333 ohms.
C. 3 ohms.
D. 16 ohms.

11. When a PNP transistor is connected in a circuit in the manner shown in Figure 52 of Electricity and Electronics, it can be used as a power amplifier because
A. the output current will be much smaller than the input current.
B. the output current will be much larger than the input current.
C. the output voltage will be much smaller than the input voltage.
D. the output voltage will be much larger than the input voltage.

12. The function of a capacitor in an electric circuit is to
A. allow current flow between its plates.
B. measure the amount of current in the circuit.
C. increase circuit power.
D. store electric charges.

13. In a cathode ray tube, the number of electrons that reach the fluorescent screen is controlled by the
A. anode.
B. cathode.
C. deflecting plate.
D. grid.

14. Which of the following frequencies falls in the range of RF waves used by commercial radio broadcasting stations?
A. 60 Hz
B. 6,000 Hz
C. 600,000 Hz
D. 6,000,000 Hz

15. To use your left hand to determine the direction of the voltage developed in a moving conductor in a stationary magnetic field, you must point your
A. thumb in the direction of the magnetic flux.
B. thumb in the direction of the electromagnetic force.
C. forefinger in the direction of the lines of force.
D. forefinger in the direction of the motion.

16. A complete circuit contains two parallel-connected devices and a generator for providing the electromotive force. The resistance of the first device is 12 ohms, the resistance of the second device is 4 ohms, and the voltage developed by the generator is 40 V. What is the magnitude of the current flowing through the first device?
A. 3.33 A
B. 8 A
C. 10 A
D. 13.32 A

17. A transformer has a primary voltage of 115 V and a secondary voltage of 24 V. If the number of turns in the primary is 345, how many turns are in the secondary?
A. 8
B. 72
C. 690
D. 1,653

18. Look at the circuit shown in Figure A-1. If you want to stop the current flow through Device 3 in the circuit, which one of the following single switches should you open?
A. Switch S2
B. Switch S3
C. Switch S4
D. Switch S5

FIGURE A-1

19. An electric heating element is connected to a 110 V circuit and a current of 3.2 A is flowing through the element. How much energy is used up during a period of 5 hours by the element?
A. 352 Wh
B. 550 Wh
C. 1,760 Wh
D. 2,580 Wh

20. The magnitude of the voltage induced in a conductor moving through a stationary magnetic field depends on the _______ and the _______ of the conductor.
A. length, speed
B. distance, circumference
C. resistance, current
D. color, capacitance

21. If a bar of copper is brought near a magnet, the copper bar will be
A. attracted by the magnet.
B. unaffected by the magnet.
C. repelled by the magnet.
D. made into an induced magnet.

22. When all parts of a circuit are composed of conducting materials, the circuit is said to be
A. parallel.
B. shorted.
C. open.
D. closed.

23. When an electron is displaced in a semiconductor, the hole that's left behind is
A. attracted to the negative terminal of the voltage source.
B. incapable of carrying a charge.
C. attracted to the anode of the voltage source.
D. considered an impurity in the crystal.

24. Including a full-wave rectifier in an AC circuit will yield a(n) _______ current.
A. intermittent direct
B. intermittent alternating
C. continuous direct
D. continuous alternating

25. Suppose that you're facing a straight current-carrying conductor, and the current is flowing toward you. The lines of magnetic force at any point in the magnetic field will act in
A. the same direction as the current.
B. a clockwise direction.
C. the direction opposite to the current.
D. a counterclockwise direction.

Reference no: EM13383372

Questions Cloud

The block has a mass of 150 kg and rests on a surface for : the block has a mass of 150 kg and rests on a surface for which the coefficients of static and kinetic friction are 0.5
Using the schematic design entry method design a logic : using the schematic design entry method design a logic circuit that has two 2-bit inputs x and y a 1-bit input
Propanoic acid ch3ch2cooh has a ka of 134 times 10-5 a 2500 : propanoic acid ch3ch2cooh has a ka of 1.34 times 10-5. a 25.00 ml sample of 0.1000 m propanoic acid in flask is
Helium gas at 25 oc filled a balloon to a volume of 225 l : helium gas at 25 oc filled a balloon to a volume of 2.25 l. what would the volume of this balloon be when cooled at
If one body is positively charged and another body is : if one body is positively charged and another body is negatively charged free electrons tend to a. move from the
A syringe initially holds a sample of gas with a volume of : a syringe initially holds a sample of gas with a volume of 285 ml at 355 k and 1.88 atm. to what temperature must the
Explain how alkenearomatic c-h stretches are : explain how alkenearomatic c-h stretches are distinguishable from alkane c-h stretches. do the c-h stretch peaks in the
A 25-ft long crane supported at its lower end by a pin is : a 25-ft long crane supported at its lower end by a pin is elevated by a horizontal cable as shown in the figure. a
A solution of ethanol c2h5oh in water is prepared by : a solution of ethanol c2h5oh in water is prepared by dissolving 90.0 ml of ethanol density 0.79 gcm3 in enough water

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Find the thevenin equivalent of the network with terminals

A Thevenin equivalent can also be determined from measurements made at the pair of terminals of interest. Assume the following measurements were made at the two external terminals a, b of a circuit.

  Design interface between a computer output port and en relay

An alarm is powered by 120 VAC, and the on/off state of the alarm is controlled by an EM relay. Design the interface between a computer output port and the EM relay. The dropout voltage is 3.5 V, and the coil current needs at least 100 mA. Limit t..

  Compute the output y of the system using convolution

Thesignal x(t)=u(t-1)-u(t-3) is the input to an LTI systemwith the impulse response h(t)=u(t-5)-u(t-8)The system is initially atrest. (a)Compute the output y(t) of this system using convolution. Make asketch of y(t)

  Find frequency that will cause inductor to have impedance

1. Determine the capacitance for a capacitorif its impedance is 5000 ohms at 400 radians/second. 2.Calculate the frequency that will cause a100mH inductor to have an impedance of 15,708 ohms.

  Discuss the advantages and disadvantages of shorter packets

a) both stations begin to transmit at the same time b) one station begins to transmit at the first possible moment such that its transmission would not be detected by the other station before it began its transmission

  Find how much power is dissipated by the transistor

at room temp a power transistor has beta of 160 and it is used in a DC dimmer circuit to control a 24 volt 120 watt lamp the lamp power supply is 48 volts dc and it can deliver a maximum of 21 amperes of current

  Design the details of the d-a using a weighted resistor

design the details of the D/A using a Weighted Resistor( NOT R-2R) technique, as well as the logic details of the sequencer/decision maker/state machine which sequences the A/D through its conversion steps to convert an analog input into a 4-bit b..

  Find the sets a-b and c that corresponds to the events

Three friends (Al,Bob and Chris) put their names in a hat and each draws a name from the hat.(Assume Al picks first, then Bob,then Chris). Find the sample space. Find the sets A,B,and C that corresponds to the events "Al draws his own name".

  What type of electron transition from valence to conduction

1) When discussing the generation of electron/ hole pairs by light in semiconductors is it best to use the wave or particle rendition of light energy. 2) In what type of electron transition from valence to conduction band is momentum conserved, dir..

  Find the capacitance as a formula containing s-d-e1 and e2

As usual neglecting edge effects, find the capacitance as a formula containing S,d, e1, ande2. Test that yourformula gives the correct well-known result for the capacitance ofa parallel-plate capacitor with uniform dielectric when you put e1 = e2.

  What is the value the minimal input signal variation

Analog to Digital Converters The input signals of an (10bits) ADC are from -1Volt to +1Volt. a) What is the rage of the converters b) What is the resolution c) What is the precision What is the value the minimal input signal variation that this ADC c..

  Draw logic diagram of four-bit register with four flip flop

Draw the logic diagram of a four-bit register with four D flip-flops and four 4 X 1 multiplexers with mode selection inputs s1 and s0. The register operates according to he following function table

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd