User Account

All Pages

If it has to be operated in 300degf maximum with fully

Assignment Help Mechanical Engineering
Reference no: EM13629900

A forged 6061-T6 Aluminum bar (d=1.5 in.) with Sut=45000 psi will be used for one of the machine component. If it has to be operated in 300°F maximum with fully reversed torsion, determine the correct fatigue strength at 2*10^7 cycles?

Assumptions: A reliability factor of 99.0% will be used. The uncorrected fatigue strength will be taken at 5*10^8 cycles.

Reference no: EM13629900

Questions Cloud

What is the direction of the acceleration whats is the mass : three forces acting on an object are given by f1 -2.00i 2.00j n f2 5.00i -3.00j n and f3 -45.oi n. the object
A steady flow of liquid ethylene glycol inside finned : a steady flow of liquid ethylene glycol inside finned tubing is cooled from an inlet state of 85c and 2000kpa to an
The atomic weight of carbon 12 is 12 and that of magnesium : a star of mass 10 msun is composed entirely of fully ionized 12c.a what is the mean molecular weight ??b suppose that
A water-coolerice-maker operates at steady-state producing : a water-coolerice-maker operates at steady-state producing chilled water at 5 c and ice at -10 c from tap water at 20c.
If it has to be operated in 300degf maximum with fully : a forged 6061-t6 aluminum bar d1.5 in. with sut45000 psi will be used for one of the machine component. if it has to be
Determine p2 v2 and t2 for the trapped air in the final : a u-tube manometer is closed on the left end and open to the atmosphere on the right end where patm 105 pa. the
Calculate the energy of h2 molecule where nx ny nz - 10 : in general the quantization of transitional motion is insignificant for atoms because of their mass. however this
Find max stress sigmatheta the cylinder is hollow in the : find max stress sigmatheta. the cylinder is hollow in the center one layer of steel inside and a layer of brass
A 25 microc point charge is placed 42 cm from an identical : a 25 microc point charge is placed 42 cm from an identical 25 microc point charge. how much work would be required by

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Consider a pefc operating with the following specifications

consider a pefc operating with the following specifications 80 and the pressure is 2 atm at the anode and 20 and the

  Determine the volume flow rate and the density of the gas

carbon dioxide gas enters a pipe at 3 mpa and 500 k at a rate of 2 kgs. the gas is cooled at constant pressure as it

  What will be the upsetting force required

A hot upsetting of stainless steel 316/316L, 2000mm dia disc, 200mm thickness is upset at 1200 degree Celsius to 150mm thickness. what will be the Upsetting force required to forge this disc and what will be the yield stress at this temperature.

  The outer ring rotates and the bearing carries a combined

a 60 mm bore 02 series double row angular contact ball bearing has a 15 degrees contact angle. the outer ring rotates

  What will be the most probable crystal structure for this

the silver medal awarded to the second place winner in 2002 salt lake city winter olympics had a composition of 92.5 at

  What is the maximum mass that can be hung on the end of the

for a 6061 t-6 aluminum beam with dimensions b 3.0 cm d 0.5 cm and length a 30 cm a what is the maximum mass that

  The heat transferred to the condenser cooling water and the

1. steam is supplied dry saturated at 40 bar to a turbine and the condenser pressure is 0.035 bar. if the plant

  An air-standard otto cycle operates with a compression

an air-standard otto cycle operates with a compression ratio of 8. at the start of the compression stroke the pressure

  What is the pressure at any point at the bottom of the tank

A tank with a flat bottom is filled with water to a height of 3.5 meters. what is the pressure at any point at the bottom of the tank? (You can ignore atmospheric pressure when calculating your answer.)

  Consider a 300 mm x 300 mm window in an aircraft for a

consider a 300 mm x 300 mm window in an aircraft. for a temperature difference of 80oc from the inner to the outer

  Determine the optimal pressures

determine the optimal pressures, temperatures, and fraction of steam extracted to maximize thermal efficiency.

  A frictionless piston-cylinder contains argon which is

a frictionless piston-cylinder contains argon which is initially at 25 deg. c with a volume of 2.2m3. the system is

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd