User Account

All Pages

If a system has two redundant safety systems with failure

Assignment Help Mechanical Engineering
Reference no: EM13618808

If a system has two redundant safety systems with failure rates of 0.16 and 0.22 faults per year respectively, what is the reliability and probablility of failure of the overall system? what is the MTBF for the overall system?

Reference no: EM13618808

Questions Cloud

A analyse a technological device that applies the : a analyse a technological device that applies the principles of linear or circular motion. b assess the impact on
If at the beginning of the compression stroke the pressure : an air-standard otto cycle compression ratio of 9 absorbs 1000 btulbm of air. if at the beginning of the compression
How would the accounting be affected if the original costs : 1 a gunsmith company has an inventory of 100000 ounces of gold originally purchased for 4.00 per ounce. on september 30
Two solenoids are nested coaxially such that their magnetic : two solenoids are nested coaxially such that their magnetic fields point in opposite directions. treat the solenoids as
If a system has two redundant safety systems with failure : if a system has two redundant safety systems with failure rates of 0.16 and 0.22 faults per year respectively what is
Design an experiment that will require a two sample t : mtv some students do homework with the tv on. anyone come to mind? some researchers want to see if people can work as
Assume that the risk-free rate is 8 percent the required : assume that the risk-free rate is 8 percent the required rate of return on the market or an average-risk stock is 13
An electron passes through a point 391 cm from a long : an electron passes through a point 3.91 cm from a long straight wire as it moves at 34.5 of the speed of light
What is the ucl a and the lcl b what is the probability : a control chart for the fraction non-conforming of muffler bearing production is maintained with a p value of 0.10 and

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  A combined gas-vapor power plant operates as shown in

a combined gas-vapor power plant operates as shown in fig.9.94. pressure and temperature data are given at principal

  The collectors deliver aeat at 70 degrees c and the engine

a engineer designs a heat engine using flat-plate solar collectors. the collectors deliver aeat at 70 degrees c and

  Find the stresses in a point of a rod that is fixed

find the stresses in a point of a rod that is fixed to a wall and have a load in the edge or better known as a cantilever.

  The corresponding magnitude of r

Two control rods are attached at A to lever AB. Using trigonometry and knowing that force in the right-hand rod is F2=20 lb, determine a.) the required force F1 in the left-hand rod if the resultant R of the forces exerted by the rods on the le..

  Find the velocity of the jet air

If the deflection of the gae fluid height, h, is 2 inches find the 1) velocity of the jet air and 2) the force exerted on the disk by the air.

  A bucket of mass 20kg is whirled in a vertical circle of

a bucket of mass 2.0kg is whirled in a vertical circle of radius 1.1m. at the lowest point of its motion the tension in

  The 25-kg bar bd is attached to the two light links ab and

the 25-kg bar bd is attached to the two light links ab and cd and moves in the vertical plane. the lower link is

  What would be the natural period of the system

If an identical spring is cut so that one part is one-fourth and the other part three-fourths of the original length, and the mass m is connected to the two parts, what would be the natural period of the system?

  Determine the largest couple moment m

The uniform 6-kg slender rod rests on the top center of the 3kg block. If the coefficients of static friction at the points of contact are ua=.4 and ub=.6, and uc=.3, determine the largest couple moment M which can be applied to the rod without ca..

  Explain why this is consistent with our definition of

show that the circumferential strain measured by a transverse gage on a round bar is the same as the radial strain.

  What is the flow rate required to cool and maintain

what is the flow rate required to cool and maintain 0.5 x 0.5 x 0.5 m3 volume of air at 297 K to 199 K, using nitrogen at 199 K

  Heat transfer coefficient h64 wm2k one end of the rod is

a steel rod with a diameter of 2 cm length l25cm thermal conductivity of 50 wmk is exposed to ambient air at 20c. heat

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd