Reference no: EM131199645
Risk Management
In this project, you will be given the opportunity to demonstrate your understanding of the risk management concepts covered in this and previous units in the course.
Select a real or imagined workplace setting that involves hazards created by two or more of the hazard sources discussed in Chapters 14-27.
Your assignment is to identify and assess the risks in this workplace, propose tactics for reducing the risks, and evaluate the residual risks.
Your submission should include the following:
- A brief description of the workplace setting and an explanation of the tasks in this workplace.
- Identification of hazards and risks in the workplace; Job Hazard Analysis (JHA), Failure Modes and Effects Analysis (FMEA), or Fault Tree Analysis are to be used, or some combination of these techniques.
- Assessment of the identified risks before risk reduction efforts are applied, using a 5x5 Risk Assessment Matrix.
- Identification of risk reduction tactics to be applied with a brief justification for each tactic selected; multiple tactics can be applied to each risk if needed.
- Re-assessment of the risks after tactics are applied, using a 5X5 matrix.
- Discussion of the residual risks, and whether you feel they are at a tolerable level.
The project must be a minimum of four pages, and a maximum of seven pages in length, not including the title, abstract, and reference pages. Use APA formatting where applicable.
Article: RISK REDUCTION METHODS FOR OCCUPATIONAL SAFETY AND HEALTH BY Roger C. Jessen
|
Draw the ppf for the united states
: Suppose in the United States, one worker can produce 10 tons of steel per day or 20 tons of chemicals per day. In the United Kingdom, one worker can produce 5 tons of steel per day or 15 tons of chemicals per day. The United States has 30 workers ..
|
|
Describe components of social-cognitive theory
: Describe components of social-cognitive theory that explain why the habit formed and develop a plan that applies operant conditioning to change this habit.
|
|
State the two physical states associated with elements
: A basic characteristic of a digital system is that many hardware components of the system are able to store and/or transfer binary data. Since a two-state element is needed to represent a binary digit (bit), this type of digital hardware should ph..
|
|
Examine processes of collecting information security measure
: Examine the process(es) of collecting information security measures, how often do they need to be collected, what are the downsides of collecting and reporting the measures too frequently or too seldom.
|
|
Identification of hazards and risks in the workplace
: Identification of hazards and risks in the workplace; Job Hazard Analysis (JHA), Failure Modes and Effects Analysis (FMEA), or Fault Tree Analysis are to be used, or some combination of these techniques.
|
|
What is a combinational logic circuit
: Explain a simple way to detect the direction of motion by checking the binary value in the register. Discuss a way to physically implement this direction- detection method.
|
|
Meaning of a closed system
: This is an environmental economics question. What is the meaning of a closed system?
|
|
Prepare a report to attract foreign investors
: Prepare a report to attract foreign investors. Report have to include PESTLE ANALYSIS, however only LEGAL AND ECONOMIC needed in this report.
|
|
Equilibrium price and equilibrium quantity
: A low-income country decides to set a price ceiling on bread so they can make sure that bread is affordable to the poor. The conditions of demand and supply are given in the table below.
|