Hydrogen to be ideal gas with constant specific heats

Assignment Help Mechanical Engineering

Reference no: EM13719901

Hydrogen gas at 35ºC and unknown pressure (State 1) enters a steady, insulated system which has no work interaction with the surroundings.

Half of the gas exits at 2 bars and 90ºC (State 2) and the other half exits at 2 bar and -20ºC (State 3).

Consider hydrogen to be ideal gas with constant specific heats.

Calculate the minimum possible inlet pressure (bar) of hydrogen gas.

Reference no: EM13719901

Questions Cloud

Determine the specific heat transfer for the compressor : Air is compressed in a steady-flow compressor via a polytropic process from 15 psia and 60ºF (State 1) to 75 psia and 294ºF (State 2). Calculate the specific work (Btu/lbm) for the compressor. Determine the specific heat transfer (Btu/lbm) for the co..

Determine the entropy generation for the pump : Saturated liquid water is compressed from 100 kPa (State 1) to 2.5 MPa (State 2) in an adiabatic pump having 85% isentropic efficiency. Calculate the specific work (kJ/kg) required for the compression of liquid water. Determine the entropy generation..

Explain the moment of inertia : You are given a disc of uniform density and need to design an experiment to determine its moment of inertia, I

Calculate the mass flow rate through the two-stage turbine : Steam enters a two-stage adiabatic turbine at 8 MPa and 550ºC (State 1) and is expanded to 2 MPa (State 2) in the first stage of expansion. This steam is reheated at constant pressure to 550ºC (State 3) before entering the second stage of expansion. ..

Hydrogen to be ideal gas with constant specific heats : Hydrogen gas at 35ºC and unknown pressure (State 1) enters a steady, insulated system which has no work interaction with the surroundings. Half of the gas exits at 2 bars and 90ºC (State 2) and the other half exits at 2 bar and -20ºC (State 3).

What is the rate of entropy generation within the turbine : Air at 5 bar and 177°C (State 1) is expanded through a turbine to 1 bar and 27°C (State 2). The mass flow rate of air through the turbine is 2 kg/s. Stray heat loss of 53.22 kW occurs to a surrounding at 27°C. Calculate the power (kW) developed by th..

Rigid tank is divided into two equal parts by a partition : A rigid tank is divided into two equal parts by a partition. One part of the tank contains 3.1 kg of compressed liquid at 400 kPa and 60 degrees Celcius while the other part is evacuated. The partition is now removed, and the water expands to fill th..

Multiplied by to give teh drag of the full-scale submarine : Consider a submarine cruising at 0.18 m/s far below the surface in sea water at 20 degree C. A 1:50-scale model of the submarine is to be tested in a towing tank. The tests are performed in fresh water at 20 degree C. At what speed should the model b..

Assuming no friction losses in the bend : A pipe transports water in a 4-cm-diameter pipe with an average velocity of 10 m/s. The pipe undergoes a 90 degree bend and exits out a 2-cm-diameter nozzle. Assuming no friction losses in the bend, the total force of teh water on the bend is nearest..

User Account

All Pages