How your design will enhance the user experience

Assignment Help Other Subject

Reference no: EM13702393

Task
Your project brief has been accepted by Senior Management and a design project has been formally commenced. You have been appointed as both Project Manager and Chief Designer for the project.
Your tasks are to:
1. Update your project brief with full details of:
  1. Objectives, Outputs and Targets,
  2. Success Criteria.
2. Write a Project Design Proposal that covers the following:
  1. Design aims;
  2. Outline of the proposed design.
  3. Proposed evaluation methods;

Your first task updates your initial project document. The update should now reflect the complete user requirements and your objectives, outputs and targets for the project. This update will probably not exceed two (2) pages.

The Project Design Proposal should outline firstly your design aims for the project and how they will meet the user requirements.

You should give a brief outline of your design. This should be mainly written, rather than be drawn, and you should describe HOW your design will enhance the user experience (UX) of the user while meeting their requirements. You will also need to refer to design principles to support your argument.

Finally, you need to discuss how you will test your design for usability, UX, and the interface's fit to the requirements. Again you will want to support your argument with reference to principles. You do not need to produce a full test plan at this time.

Verified Expert

Reference no: EM13702393

Questions Cloud

A round cantilever bar is loaded : A round cantilever bar is loaded. Given diameter d = 50mm, T = 0.1P N.m, F = 10P N. Allowable stresses are 100 MPa in tension and 60 MPa in shear on a section at a = 120 mm from the free end. Determine largest P.

Settlement point and settlement range : A proposal utilizing pigou''s or hick''s collective bargaining model- defining concession curve, settlement point and settlement range

What is the maximum possible error in each case : Two resistors, R 1 = 100.0 ± 0.2? And R2 = 50.0 ± 0.1? are connected (a) in series and (b) in parallel. Calculate the uncertainty in the resistance of the resultant circuits. What is the maximum possible error in each case?

Turbine work output in kg and thermal efficiency of cycle : A steam power plant operates on the ideal reheat Rankine cycle. Steam enters the high pressure turbine at 6 MPa and 4000C and leaves at 2 MPa. Steam is then reheated at constant pressure to 4000C before it expands to 20 kPa in the low pressure turbin..

How your design will enhance the user experience : HOW your design will enhance the user experience (UX) of the user while meeting their requirements. You will also need to refer to design principles to support your argument.

Piston–cylinder assembly : Water, initially a saturated liquid at 100 C, is contained in a piston–cylinder assembly. The water undergoes a process to the corresponding saturated vapor state, during which the piston moves freely in the cylinder.

Rate of heat refrigerator receives from the cold storage : It is claimed that a refrigerator requiring 400 W of power (W) receives heat from cold storage (low temperature source, TL) at 200 K and rejects heat at the rate of 600 W (QH) to an environment at 600 K (high temperature reservoir, TH). Calculate the..

Maximum shear stress at the outer surface of the cylinder : A cylinder with a 0.3 m inner diameter and 0.4 m outer diameter is internally pressurized to 140 MPa. Determine the maximum shear stress at the outer surface of the cylinder.

Hemispherical ends is used to transport gas : A 1 m diameter cylindrical container with hemispherical ends is used to transport gas. The internal pressure is 5 MPa and the safety factor is 2. Using the MSST determine the container thickness. The Material is such that E = 200 GPa, Sy = 430 MPa an..

User Account

All Pages