How would your answer be different if the source

Assignment Help Civil Engineering
Reference no: EM13564853

1.Water leaves a reservoir at 0.05 m^3/s through a 200-mm riveted steel pipeline that protrudes into the reservoir and then immediately turns a 90º bend with a local (minor) loss coefficient equal to 0.3. Estimate the length of pipeline required for the friction losses to account for 90% of the total losses, which includes both friction losses and minor losses.

2.A stream with a flow of 22 mgd contains 180 mg/L of sodium cyanide in the form of NaCN. Chlorine can be added to destroy the NaCN waste according to the reaction shown below. Find the theoretical minimum amount of chlorine required (in lb/day). How would your answer be different if the source of chlorine was only 85% pure (provide a quantitative response)? 2 NaCN + 5 Cl2 + 12 NaOH ? N2 + Na2CO3 +10 NaCl + 6 H2O

Reference no: EM13564853

Questions Cloud

What temperature change is required to return the 100-mm : The elastic modulus is 40 GPa, the yield stress is 150 MPa, the ultimate stress is 525 MPa, and the ultimate strain is 0.38 (mm/mm). Perform the following tasks for this material.
Evaluate what impulse was given to the ball by the floor : a ball of mass 0.150 kg is dropped from rest from a height of1.25m. It rebounds from the floor to reach a height of 0.960m. What impulse was given to the ball by the floor
Find the residual chemical concentration and the amount : A chemical is added at the beginning of a water treatment plant at a dose of 750 lb/day. The water treatment plant provides water to a community of 200,000 people and the average water consumption in the city is 110 gallons per capita per day (gpcd).
Evaluate the volume of the paper weight : A paperweight, when weighed in air, has a weight of W = 6.9N.When completely immersed in water, however, it has a weight of Win water = 4.3 N. Find the volume of the paper weight
How would your answer be different if the source : A stream with a flow of 22 mgd contains 180 mg/L of sodium cyanide in the form of NaCN. Chlorine can be added to destroy the NaCN waste according to the reaction shown below. Find the theoretical minimum amount of chlorine required (in lb/day). How w..
Find the angular speed of the sphere at the bottom of hill : A 270 N sphere 0.20 m in radius rolls,without slipping 6.0 m down a ramp that is inclined at 31° with the horizontal. What is the angular speed of the sphere at the bottom of the hill
Evaluate what is the frequency of the system : An object moving in simple harmonic motion has an amplitude of0.05 m and a maximum acceleration of40 m/s2. What is the frequency of the system
Determine the following material properties : A tension specimen has a gauge length of 8 inches and a diameter of .505 inches. A load of 9580 pounds was found to develope a stress in the specimen equal to the proportional limit of materials.
What is the flow rate of the gas stream leaving : A gas stream contains 18.0 mole% hexane and the remainder nitrogen. The stream flows to a condenser, where its temperature is reduced and some of the hexane is liquefied. The hexane mole fraction in the gas stream leaving the condenser is 0.0500. Liq..

Reviews

Write a Review

Civil Engineering Questions & Answers

  Probability of the functions of car battery

The probability that a new car battery functions for over 10,000 miles is .8, the probability that it functions for over 20,000 miles is .4, and the probability that it functions over 30,000 miles is .1. If a new battery is still working after 10,..

  Determine downstream depth into gradual contraction section

If the flowrate is Q = 25 ft^3/s and the upstream depth is 2 ft, determine the downstream depth. Sketch the specific energy diagram and indicate its important characteristics. Note that the specific discharges are different.

  Estimate the plume mass flow rate of a pool of benzene

A pool of benzene is ignited on the floor of a large industrial building. The total area covered by the Kerosene pool is 6 meters square (Note that this is considered a large pool D>0.2 meters). Combustion efficiency is 70%. Estimate the plume mas..

  Determine the magnitude of total acceleration of runner

An outdoor track is 125m in diameter. A runner increases her speed at a constant rate from 4 to 7 m/s over a distance of 30m. Determine the magnitude of the total acceleration of the runner 2 s after she begins to increase her speed.

  How to determine the grade of the road of an object

A driver is travelling at 50 mi/h on a wet road. An object is spotted on the road 500 ft ahead and the driver is able to come to a complete stop just before hitting the object.

  Tightness of skid along with pump-motor

What is the solution if foundation bolt cut by some way from their bottom of skid, i mean skid base than how to keep another bolt etc for tightness of skid along with pump-motor already fittied with pipe and other fitting's too..

  Determine the minimum length of a side fillet weld

determine the minimum length of a 5/16 inch, side fillet weld that will be necessary if the plate is subjected to an axial stress of 20 ksi . use an allowable shearing stress through the throat of the weld of 21 ksi.

  Determine the additional normal force exerted by the ground

Each wheel of an automobile has a weight of 48 lb, a diameter of 23 in., and a radius of gyration of 9 in. The automobile travels around an unbanked curve of radius 450 ft at a speed of 65 mi/h.

  Estimate the supply pressure required at this flow rate

Water, at volume flow rate Q=20 L/s, is delivered by horizontal fire hose and nozzle assembly. The hose (L = 100m, D = 75 mm, and e/D = .004) is made up of five 20 m sections joined by couplings

  What is the minimum required length l of the rod so that the

What is the minimum required length L of the rod so that the cross section at one end can be rotated 90 degree with respect to other end without exceeding the allowable shear stress of 300 MPa

  Determine what is the permeability of the soil

The Permeability of a semi-impervious soil was evaluated in a falling-head permeameter whose head decreased from 40 to 15 inches in 5min. The body diameter was 0.1 inch, and the sample length and diameter was 2 inches.

  Find the rate of change in volume

A water tank has a height of 120m, and its area of cross-section is 2000m. Water is released from the tank and the water level drops by 1 meter every minute. Find the rate of change in volume.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd