How to relate resistance to transconductance of vccs

Assignment Help Electrical Engineering
Reference no: EM13253312

Prove that the terminals of a voltage controlled current source (VCCS) can be connected so as to form a 2 terminal element that behaves exactly like a resistor. draw the circuit diagram and provide an equation that relates the resistance to the transconductance of the VCCS.

Reference no: EM13253312

Questions Cloud

Calculate the emf at the generator end of the lines : 35MW of power at 45kV (rms) arrives at a town from a generator via 5.0? transmission lines. Calculate the emf at the generator end of the lines
Explain balance the equations for the formation of hbr : Balance the equations for the formation of HBr(g) and H2S(g) from their elements in their standard states. Include H°f for each reaction.
Explain how the strength of the economy as a whole could : Explain how the strength of the economy as a whole could affect the marginal benefits and the marginal costs associated with a decision to purchase a home.
How stores approach inventory planning for black friday : How should stores approach inventory planning for Black Friday? How should retailers plan the process of opening the doors and getting excited customers through checkout?
How to relate resistance to transconductance of vccs : Prove that the terminals of a voltage controlled current source (VCCS) can be connected so as to form a 2 terminal element that behaves exactly like a resistor.
What is the intensity of the wave : An electromagnetic wave in a vacuum has a magnetic field with a magnitude of 1.29 × 10-6 T. What is the intensity S of the wave
Provide an example of your use of money : Money acts as a unit of account, medium of exchange, or a store of value. Describe each of these different functions.
Determine the work done by the net external force : A water-skier is being pulled by a tow rope attached to a boat. As the driver pushes the throttle forward, the skier accelerates, Determine the work done by the net external force acting on the skier
Explain water in a constant-pressure calorimeter : In a purity check for industrial diamonds, a 11.25 carat (1 carat = 0.2000 g) diamond is heated to 74.21°C and immersed in 27.30 g of water in a constant-pressure calorimeter

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Calculate the adjustable resistance value to provide control

1 kW heating element of a 230 V, 50 Hz electric stove is to be controlled by a triac circuit. The gate circuit of the triac uses a 0.2 mF capacitor and a diac with a break over voltage of 50 V. Calculate the adjustable resistance value to provide ..

  How the intraprediction in the two coding standards makes

algorithms to show the differences in the intra prediction in the h.264 and hevc coding standards. it should indicate how the intraprediction in the two coding standards makes a difference in their efficiency.

  Determine the power and torque developed by the motor

A dc series motor of 230 V, 12 hp, 1200 rpm is connected to a 230 V supply. It draws a current of 40 A, and rotates at 1200 rpm. Ra = 0.25 ohms and Rs = 0.1 ohms. Assume magnetic linearity.

  Explain flet-compound generator has a shunt field

Each pole of a 100kW, 250v flet-compound generator has a shunt field of 2000 turns and a series field of 7 turns. If the total shunt field resistance is 100 ohms

  Calculate first three energy levels that electron may occupy

An electron is bound in a one-dimensional infinite potential well with a width of 5Å. (a) Calculate the first three energy levels that the electron may occupy. (b) If the electron drops from the third to the second energy level

  Design a low-pass filter with a cutoff frequency

A) Design a low-pass filter with a cutoff frequency of 12 kHz. Use 0.15 uF capacitor and an appropriate resistor. B) Sketch and label the circuit. C) What is the gain of the filter at a frequency of 20 kHz Give your answer both as ratio (Vout/Vin) an..

  Find line current and the power factor of the combined loads

Two three-phase loads are y-connected across a 300 Volt three phase line. One load draws 10kW at a p.f. of 0.9 leading, and the second load draws 8kW at a p.f. of 0.6 lagging. V(line-neutral)=300V/sqrt(3)=173.21V

  Compute the line current-power and power factor for the toad

The load on a 460-V, 60-Hz, Y-connected, balance three-phase source consists of three equal Y-connected impedances of 100+j100 ohms, and three equal Delta-connected impedances of 300-j300 ohms. Compute the line current, power, and power factor for..

  Specify the equalizer filter e to recover the signal

A signal has a band width of 15 hz. The Signal is sampled , quantized and binary coded to obtained a PCM signal. Suppose the reconstruction pulse used is p(t)= rect ( (5t / Ts) - 0.5), where Ts= 1/ fs. Specify the equalizer filter E(f) to recover t..

  How to generate odd parity over the individual words

Design a system using either a flow diagram or pseudo code that will accept a block of data words encoded as specified in Part 1; then check the parity for each data word and for the block. The system should output each of the 8-bit data words.

  Find probability of given probability density function

The probability function of the amount of soft drink in a can is f(x) = 4cx for 11.5

  Write a program that reads a nonnegative integer

The factorial of a nonnegative integer n is written n! (pronounced "n factorial") and is defined as follows: n!= n(n-1)(n-2)(n-3)....1 (for values of n greater than or equal to 1) and n!= 1 (for n=0) for example 5! = 5x4x3x2x1,

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd