How to perform an economic analysis

Assignment Help Electrical Engineering
Reference no: EM13226766

For a new product sales are expected to be 2,000 products in year 1, increasing by 1,000 products each subsequent year to 5,000 products in year 4. Two different manufacturing equipment options are available:

a) Up front equipment purchase cost of $14,000, with manufacture cost per unit of $0.70, and equipment salvage recovery (at end of 4 years) of $3,000.

b) Up front equipment purchase cost of $21,000, with manufacture cost per unit of $0.2, and equipment salvage recovery (at end of 4 years) of $4,000.

Assuming an interest rate of 8% over the 4 year production period, perform an economic analysis and select the best option.

Reference no: EM13226766

Questions Cloud

Development of accounting : what extent can these events you identified in part a) be used to argue that accounting can have an influence on society?
Calculate the three-phase steady-state short-circuit current : A 150 MVA, 24 kV, 123% three-phase synchronous generator operates with an induced voltage that is twice the rated line-to-neutral voltage. Calculate the three-phase steady-state short-circuit current at the generator terminals.
Calculate necessary excitation voltage n input complex power : A 150 MVA, 24 kV, 123% three-phase synchronous generator carries the rated load at a power factor 0.83 (lagging). Calculate the necessary excitation voltage and input complex power.
Explain precipitation reaction is likely for the reactants : On the basis of the solubility rules, write a balanced molecular equation for the precipitation reactions that take place when the following aqueous solutions are mixed. If no precipitation reaction is likely for the reactants given
How to perform an economic analysis : For a new product sales are expected to be 2,000 products in year 1, increasing by 1,000 products each subsequent year to 5,000 products in year 4. Two different manufacturing equipment options are available a) Up front equipment purchase cost of $..
Describe to robert the normative ethical theories : Describe to Robert the normative ethical theories and advise Robert of an appropriate decision from the teleological ethics perspective of 'ethical egoism'. Explain why it is based on 'ethical egoism'.
Explain the temperature remains constant : the temperature remains constant, and the pressure on the oxygen is decreased to one third the original pressure, what is the new volume
Find the input impedance into this line at z : A transmission line with no loss, with Z0= 60 ohms, is operated at 60MHz. The velocity on the line is c. The line is soldered to a ground connection at z=0. Find the input impedance into this line at z= -1.25 meters
State moles of gas are there in a gas-filled balloon : How many moles of gas are there in a gas-filled balloon, which has a volume of 67.0 L at a pressure of 742 mmHg and a temperature of 25.0°C?

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Calculate inductance of sensor for air gap

calculate inductance of sensor for air gap of 1mm and 3mm?

  Define probability of a false alarm- noise power

Probability of a False Alarm: Noise Power, The fixed threshold of a radar detector was set, assuming a known noise power, to yield P_FA = 10^-6

  Write the ybus matrix

Identify the bus types and the unknown variables of the power flow problem. Write the complete set of equations needed to solve the load flow problem.

  What price would you try to negotiate

Suppose you are the supplier and can produce 20 units now but cannot start production on the second 20 units for two months. What price would you try to negotiate for the last 20 units?

  What aspects of the software need to be considered

If designing a computer configuration for use as a workstation for one specific application, what aspects of the software need to be considered as part of the design process?

  Calculate the traffic load per cell

The system uses a 7-cell reuse pattern. If the offered traffic per user is 0.03 Erlangs and the average number of calls per hour per user is 1.5, for an Erlang-C system with a probability of delaying a call being 5%, calculate the traffic load per..

  How much reactive power is flowing from bus 1 to 2

The voltage on bus 1 is 1.0 per unit (pu) at 30 degrees; the voltage on bus 2 is 0.95 per unit at 5 degrees. The reactance connecting bus 1 to bus 2 is 0.5 per unit Ohms, and the resistance is negligible. a)How much real power (pu) is flowing from ..

  Sketching the dependence of l versus h on cartesian axes

Sketching the Dependence of l versus h on Cartesian Axes, The distance l from a point at a height h above the Earth's surface to the horizon can be approximated using Pythagoras theorem by the expression:

  Explain problem on complex power

Problem on complex power, An electric load operates at 240 volts. The load absorbs an average power of 8Kw at a lagging power factor of 0.8.

  Is the second law satisfied

Is the second law satisfied? Will this refrigerator still satisfy the second law if its coefficient of performance is 6?

  Explain digital signal processing

Important information about Digital signal processing, (a) Design a lowpass FIR digital filter using "remez" routime in Matlab for the following specifications:

  Determine the current drawn from a three-phase line

Determine the current drawn from a three-phase 440 V line by a three-phase 15-hp motor operating at full load, 90% efficiency, and 80% power-factor lagging. Find the values of P and Q drawn from the line. (Hint: 1hp = 746W)

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd