How to determine the scale reading at t

Assignment Help Civil Engineering
Reference no: EM13302359

A large tank is used to calibrate the reading from a flow meter. Measurements of the system weight as a function of time are made. Water enters the tank vertically from the flow metering system at a speed of 20 ft/sec through a 1.5 in. diameter pipe. If the weight of the empty tank is 50 lbs, determine the scale reading at t=10 sec. What is the true weight of the water and tank at 10 sec?

Reference no: EM13302359

Questions Cloud

Explain the higher of the two spots during tlc analysis : Ferrocene eluted from the column first and acetylferrocene second, but ferrocene ended up as the higher of the two spots during TLC analysis. Explain.
Products and services different : In what way are products and services different?
Compare and contrast the formula resulting from each theory : If given a brittle material with a known tensile strength, Sut, and a known compressive strength, Suc, use the four main fracture criteria (MNSC, BCM, MM, and MIIM) to determine the shear stress, tau, in terms of the material properties Sut and Su..
Mgt-660 capstone project overview : 1.Describe the preferred timing and objectives of your business plan. Include an Excel spreadsheet with critical decisions and dates.
How to determine the scale reading at t : A large tank is used to calibrate the reading from a flow meter. Measurements of the system weight as a function of time are made. Water enters the tank vertically from the flow metering system at a speed of 20 ft/sec through a 1.5 in.
Explain the density of magnesium oxide : The density of magnesium oxide is 3.58 g /cm3. Given that the radius of the O2- ion is about 140 pm in most oxides, calculate the radius of Mg2+, in pm. Your solution should include a sketch one face of the unit cell of MgO to show how the edge le..
Calculate the irr of this joint-venture : Would it be possible to calculate the IRR of this joint-venture? What are the possible problems, if any, with its calculation in this specific problem?
Ideas for new products to scour pots and pans : A firm is looking for ideas for new products to scour pots and pans. Which is the most appropriate research method for gathering these new product ideas?
Which strategy benefits from stock price increase : 1) Currently, a stock price is $51. Over each of the next 2 6-month periods it is expected to go up by 12% or down by 10%. The risk-free rate is 3% per annum with continuous compounding. What is the value of a 1-year European put option with a..

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the speed of the stone

A 0.20 kg stone attached to a 0.8 m long string is rotated in a horizontal plane. The string makes an angle of 25° with the horizontal. Determine the speed of the stone.

  Find the total mass

A container of volume 0.04 m3 contains a mixture of saturated water and saturated steam at a temperature of 250oC. The mass of the liquid present is 9 kg. Find the total mass, quality of steam, specific volume, specific enthalpy, and specific inte..

  What percentage of the water evaporates

Saturated liquid water at 1.0 MPa is throttled adiabatically to a pressure of 0.4 MPa. If the change is kinetic energy is negligible, what percentage of the water evaporates during this throttling process?

  Determine the position of the race car

Starting from x = 0 with no initial velocity, the acceleration of a race car is defined by the relation a = 6.8e-0.00057x, where a and x are expressed in m/s2 and meters, respectively. Determine the position of the race car when v = 30 m/s.

  Absolute pressure of the carbon dioxide in the can

The circular top of a can has a radius of .0320m. the pull-tab has an area of 3.8x10^-4 m^2. The absolute pressure of the carbon dioxide in the can is 1.40x10^5Pa. find the force that these gas generates on the top of a can?

  Determine the coefficient of friction

a mass of 2kilogram is projected with a speed of 3m/s.if a plane inclined 20 degrees with the horizontal.after travelling travelling 0.8meters, the mass comes to rest. determine the coefficient of friction and also the speed as the black returns t..

  How much force must be applied to keep the gate \

A gate (shaped like .25 of a cylinder with radius R=3m) is used to control the flow of water through a canal.The height of the water in the tank is 30m. How much force must be applied to keep the gate from opening? The gate is 30m wide.

  Determine the range from the sv to the rec in gps

determine the range from the SV to the REC in GPS; using codes C/A and P and also waves (L1 and L2). How does two of the below from the list have an effect on the codes and waves

  Determine at which of the two points the elevation is higher

At point 2, the velocity and pressure are 14 ft/s and 23 psi. Determine at which of these two points the elevation is higher. Calculate the height difference. (Assume the sp ecific gravity of butane is 0.6 and that the butane is at a temperature o..

  Determine the velocity of slider block

Knowing that at t= 3s slider block C has moved 57 mm to the right, Determine the velocity of slider block C at t=0, (b) the acceleration of A and C, (c) the change in position of block A after 5s.

  Estimate value of emission rate divided by the wind speed

A ground level source is emitting pollution. An air sampler is located 1 km downwind and 0.5km crosswind of the source measures the concentration of the pollutant ant ground level as 10 micrograms/cubic meter.

  What is the maximum acceleration from rest

The base engine develops 200 ft-lb of torque, and a modified version of the engine develops 240 ft-lb of torque. If the overall gear reduction ratio is 8 to 1, what is the maximum acceleration from rest (in ft/sec^2) for.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd