How to compute the ph and the poh of the solution

Reference no: EM13310283

A solution of NaOH(aq) contains 8.0 g of NaOH(s) per 100.0 mL of solution. Calculate the pH and the pOH of the solution at 25 °C.

Reference no: EM13310283

Questions Cloud

Find the moment equations and then the deflection : a simple beam with a pin support at A on the left side of my beam, and a roller connection 20 feet away on the far right side of the beam labeled C, with the midspan point (10 feet) labeled B.

Design the traffic pole against torsion knowing that angle : The maximum wind pressure on the traffic sign is 200 kg/m2. The maximum allowable shear stress is 350 kg/cm2. Design the traffic pole (only vertical element) against torsion knowing that angle of twist at the base should not exceed 6°.

Interrogating technology : Interrogating technology:sustinability, environment and social change

Find the minimum required initial velocity for a home run : Calculate the minimum required initial velocity for a home run, for baseballs hit at the angles 10 degree, 20 degree, 30 degrees, and 40 degrees from the horizontal

How to compute the ph and the poh of the solution : A solution of NaOH(aq) contains 8.0 g of NaOH(s) per 100.0 mL of solution. Calculate the pH and the pOH of the solution at 25 °C.

How much time elapsed during this interval : You brake your Porsche with constant acceleration from a velocity of 23.6 m/s to 12.5 m/s over a distance of 105 m. How much time elapsed during this interval

Determine the compression index of the clay : A layer of normally consolidated clay has been filled with 2m of gravel at a unit weight of 17kN/m3 for a long period of time and the settlement of the clay layer monitored giving a total final settlement of 330mm.

How tall is the column of gas that is supporting the piston : A vertical cylindrical tank contains 1.80 mol of an ideal gas under a pressure of 1.00 atm at 20.0oC. how tall is the column of gas that is supporting the piston

Explain expansion process may be assumed to be isenthalpic : Wet steam flows in a pipe at a pressure of 700 kPa. To check the steam quality, the wet steam is expanded to pressure of 100 kPa. The expansion process may be assumed to be isenthalpic

User Account

All Pages