How tall is the column of gas that is supporting the piston

Assignment Help Physics

Reference no: EM13310280

1/ A cylinder 1.00 m tall with inside diameter 0.120 m is used to hold propane gas (molar mass 44.1 g/mol). It is initially filled with gas until the gauge pressure is 1.30 x 10^6 Pa and the temperature is 22.0oC. The temperature of the gas remains constant as it is partially emptied out of the tank, until the gauge pressure is 2.50 x 10^5 Pa. Calculate the mass of propane that has been used.

2/ A vertical cylindrical tank contains 1.80 mol of an ideal gas under a pressure of 1.00 atm at 20.0oC. The round part of the tank has a radius of 10.0 cm, and the gas is supporting a piston that can move up and down in the cylinder without friction.

(a) What is the mass of this piston?

(b) How tall is the column of gas that is supporting the piston

Reference no: EM13310280

Questions Cloud

Find the minimum required initial velocity for a home run : Calculate the minimum required initial velocity for a home run, for baseballs hit at the angles 10 degree, 20 degree, 30 degrees, and 40 degrees from the horizontal

How to compute the ph and the poh of the solution : A solution of NaOH(aq) contains 8.0 g of NaOH(s) per 100.0 mL of solution. Calculate the pH and the pOH of the solution at 25 °C.

How much time elapsed during this interval : You brake your Porsche with constant acceleration from a velocity of 23.6 m/s to 12.5 m/s over a distance of 105 m. How much time elapsed during this interval

Determine the compression index of the clay : A layer of normally consolidated clay has been filled with 2m of gravel at a unit weight of 17kN/m3 for a long period of time and the settlement of the clay layer monitored giving a total final settlement of 330mm.

How tall is the column of gas that is supporting the piston : A vertical cylindrical tank contains 1.80 mol of an ideal gas under a pressure of 1.00 atm at 20.0oC. how tall is the column of gas that is supporting the piston

Explain expansion process may be assumed to be isenthalpic : Wet steam flows in a pipe at a pressure of 700 kPa. To check the steam quality, the wet steam is expanded to pressure of 100 kPa. The expansion process may be assumed to be isenthalpic

Compute the heat that must be supplied to carry out : Ten kg of steam at 500 bar is expanded at constant pressure until its pressure increases to seven times its initial value of 0.01 m^3. (a) Determine the initial and final temperature of the steam. (b) Calculate the heat that must be supplied to ca..

What would be the void ratio of the clay at the point : At a point in a saturated normally consolidated clay layer the soil is subject to an in-situ vertical effective stress of 50kPa. The soil at the point has a moisture content of 44% and a compression index of 0.45.

What would be the power dissipated by the lamp : Bob connects a lamp of 34 Ohms resistance across a car battery of 12 volts. what would be the power dissipated by the lamp

User Account

All Pages