How siphon works and what is its drawing

Reference no: EM13545590

Q1. Biofilter AND dry sludge bed are part of the sewage treatment plant. Please let me know whether we can cover these facilities or not and what is micro-biological process in these. If we can provide cover than what will be the effect on its biological process.

Q2. How siphon works and what is its drawing.

Reference no: EM13545590

Questions Cloud

The coefficient of kinetic friction between the crate and : A worker slowly moves a 50-kg crate to the left along a loading dock by applying a force P at corner B as shown. Knowing that the crate starts to tip at about the edge E of the loading dock when a= 200mm, determine:

Estimate the concentration and the mass emission rate : Estimate the concentration and the mass emission rate of NOx if a coal containing 1.5% nitrogen is combusted at 1400 k using an air/fuel ratio that is 1.5 times the stoichiometric ratio

Compute the required weight of coarse aggregate per cubic : A concrete mix with a 3in slump, w/c ratio of .5, and sand with a fineness modulus of 2.4 contains 1700lb/yd3 of coarse aggregate. Compute the required weight of coarse aggregate per cubic yard

A hortizonal rectangular concerte channel terminates in a : A hortizonal rectangular concerte channel terminates in a free outfall. The channel is 4 m wide and carries a discharge of waterr of 12 cubic meters per second. What is the water depth 300 m upstream from the outfall?

How siphon works and what is its drawing : Biofilter AND dry sludge bed are part of the sewage treatment plant. Please let me know whether we can cover these facilities or not and what is micro-biological process in these. If we can provide cover than what will be the effect on its biological..

What is the minimum required length l of the rod so that the : What is the minimum required length L of the rod so that the cross section at one end can be rotated 90 degree with respect to other end without exceeding the allowable shear stress of 300 MPa

Find the principle stresses and max shearing stresses : A circular beam length 36 inches and diameter 1 inch is supported on the left end by a pin joint and the right end with a roller. The beam is under axial tension with forces of 1000 lbs out of each end.

To orient a transit in azimuth when the transit is set up : To orient a transit in azimuth when the transit is set up over a point D, a backsight is taken to another point, C, with vernier A set at the azimuth of the line CD and with the telescope in its inverted position

Find index r and recurrence relation compute : You will be using a large crane... lets say one with a capacity of 30T. What considerations need to be made prior to picking up a 15T load with the crane? If you are familiar with the use of a crane be sure to include the discussion of the outriggers..

User Account

All Pages