How much volume of naoh solution is needed at poh at 9

Assignment Help Civil Engineering
Reference no: EM13308471

A NaOH solution has pOH at 8. How much volume of this NaOH solution is needed to prepare 1 L of a NaOH solution at pOH at 9.

Reference no: EM13308471

Questions Cloud

What pressure in psi is applied to water to reduce volume : At normal atmospheric conditions, approximately what pressure in psi must be applied to water 70 F to reduce its volume by 2 %
Determine the maximum possible value for the first player : Then two players take turns picking a coin from the sequence, but can only pick the first or the last coin of the (remaining) sequence. The goal is to collect coins of the largest total value. For this problem, n is even.
Create a data file in the specified format : Create a data file in the specified format. Write a script that would read from the file floatnums.dat into a matrix, round the numbers, and write the matrix in the desired format to a new file called "intnums.dat."
Determine is there any runoff from the area during the storm : During a 5 hour storm event, the precipitation over a 230-acre area is 1.5niches. There is constant infiltration at a rate of 0.12 inches/hour and the depession storage is 17 acre-ft. Is there any runoff from the area during the storm
How much volume of naoh solution is needed at poh at 9 : A NaOH solution has pOH at 8. How much volume of this NaOH solution is needed to prepare 1 L of a NaOH solution at pOH at 9.
Elaborate and apply to current events : Elaborate and apply to current events. Be sure to cite and demonstrate mastery.
What good outcomes as well as bad outcomes will result : Suppose the U.S. economy is in a recession and there is rising inflation.  Suppose you are in charge of monetary, fiscal, and exchange rate (i.e., influencing the value of the dollar) policies.
Determine the speed and direction of the second ball : A 2.0 kg ball moving with a speed of 3.0 m/s hits, elastically, an identical stationary ball as shown. find the speed and direction of the second ball after the collision

Reviews

Write a Review

Civil Engineering Questions & Answers

  What are the factors affecting the hydraulic conductivity

what are the factors affecting the hydraulic conductivity?

  Do any of the three viscoelastic models comes closet

The faster you try to open a screen door, the more resistance you encounter. When the door is released, the length of the closer decreases linearly with time until it returns to its intial length. Do any of the three viscoelastic models

  Determine what is the pond depth above the 5 ft

calculate the depth of water in a stormwater pond resulting from a two hour rainfall event. the rainfall occurs over a 24-acre watershed at an average rate of 1 inch/hour. the runoff coefficient is 0.5.

  Determine best hydraulic section for min wetted perimeter

A flume discharges 42.0 cfs on a slope of 0.50 ft in 1000 ft. The section is rectangular, and Manning's roughness coefficient is 0.012. Determine the best hydraulic section, i.e., the dimension for minimum wetted perimeter.

  Calculate the plume centerline temperature at 6 m height

A pump in a large industrial hall containing 30 liters gasoline breaks down, causing the gasoline to spill into a 3 m2 sump surrounding the pump. The liquid pool is ignited by sparks. Assume the combustion to be 70% effective and the heat loss due..

  Determine the dead load in pounds per linear foot for beams

The beams support one-way slabs, 6 inches thick that span 20 feet center to center. Assume that the beams are 16 inches wide and 24 inches deep. Determine the dead load in pounds per linear foot for the beams, from the concrete structure alone.

  Write assembly-language program that counts all even numbers

Write a HCS12 assembly-language program that counts all even numbers from a 10-variable, byte-sized array and moves the odd numbers to a new array.

  Explain how to determine the slant range r

The ball is released from position A and drops 0.75m to the incline. If the coefficient of resistitution in the impact is e=0.85, determine the slant range R. See Engineering Mechanics Dynamics meriam and Kraige 7th edition number 3/255 for figure

  What must drivers eye height be in van for students claim

A civil engineering student contends that 60 mph is safe in a van because of the higher drivers line of site. If all other design inputs are standard, what must the drivers eye height be in the van for the students claim to be valid

  Free expansion of the rod

A rod of steel is 20 m long at a temperature of 200C. find the free expansion of the rod when the temperature is raised to 65 0 C. Find the temperature stress produced

  Write a paper on steel sustainability

Write a paper on steel sustainability.

  Calculate the work necessary to compress air in cylinder

Calculate the work necessary to compress air in an isolated cylinder from a volume of 6 ft^3 to a volume of 1.2 ft^3. The initial pressure and temperature are 30.0 psia and 50 degree F, respectively.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd