How much energy is stored in an isolated spherical capacitor

Assignment Help Civil Engineering
Reference no: EM13549244

1.You need to design a concrete (n = 0.013) channel that will convey 50,000 GPM. It is to be a trapezoidal in cross section with a bottom width of 7.5 feet. The side slopes are to be 1.33:1 (H:V) and it is desired to have the depth of flow constant at 2.0 feet. How many inches should the channel drop in 350 feet of length?

a).0.5in

b).6in

c).12in

d).16in

2.A natural trapezoidal channel (n = 0.03) with a bottom width of 10 feet, side slopes, s = 2 and depth of flow of 4-feet. The bed slope, So = 0.4%. What is the discharge?

a).200cfs

b).275cfs

c).425cfs

d).575cfs

3.A rectangular concrete (n = 0.013) channel has been surveyed to drop 6.512 feet in a four mile stretch and has a bottom width of 6-feet. The depth of flow is 4 feet. What is the flow rate?

a).16cfs

b).33cfs

c).46cfs

d).69cfs

4.Find the probability of a) 2 or more heads and b) fewer than 4 heads in a single toss of 6 fair coins.

5.How much energy is stored in an isolated spherical capacitor of radius ,R=25 cm, if it is charged to a potential of 5000V?

Reference no: EM13549244

Questions Cloud

Determine if the heat pump is reversibl, irreversible : A heat pump is used to heat a room where the outside temperature is -10°C. If the heat pump requires a power input of 2 kW, and the room requires a heat input of 15 kW to maintain the temperature at 25°C,
Determine the rate of return that the company will make : Five years ago, GSI, an oil services company headquartered in Texas, issued $10 million worth of 12% 30-year bond with the dividend payable quarterly.
What will be the time-mean speed and space-mean speed for : Assume you are an observer standing at a point along a three-lane roadway. All vehicles in lane 1 are travelling at 30 mi/h, all vehicles in lane 2 are travelling at 45 mi/h, and all vehicles in lane 3 are travelling at 60 mi/h. There is also a const..
Determine space mean speed : Data obtained from aerial photography showed six vehicles on a 600 ft long section of road. Traffic data collected at the same time indicated an average time headway of 4 sec. Determine the (a) density on the highway (b) flow on the road (c) space me..
How much energy is stored in an isolated spherical capacitor : How much energy is stored in an isolated spherical capacitor of radius ,R=25 cm, if it is charged to a potential of 5000V?
Mathematically determine the breakeven number of visitors : Two new rides are being compared by a local amusement park in terms of their annual operating costs. The two rides are assumed to be able to generate the same level of revenue (and thus the focus on costs). The Tummy Tugger has fixed costs of $10,000..
Draw a neat and clearly annotated sketch of the curve : Given the stationing in meters as (4+56) for the PC of a horizontal curve of radius R=1200 meters and angle I=22°. The azimuth of the line PC to PI as AzPC-PI = 155° 30'. A point P is to be located on the curve at stationing of 7+00. Do the following
Determine the required size of new schedule 40 steel pipe : Determine the required size of new Schedule 40 steel pipe to carry 0.5 cfs (Q = 0.5 cfs) of water at 160o F with a maximum pressure drop of 10 psi per 1,000 ft.
Write the matlab statements required to calculate and print : A belt is wrapped around a pulley for 180 degrees. The loose-side belt tension is 100 lb and the coefficient of static friction is 0.30. Calculate the maximum belt tension if motion is impending. Assume A) a flat belt and B) a V-belt with a groobe an..

Reviews

Write a Review

Civil Engineering Questions & Answers

  Estimate the power required to accelerate a 1350 kg vehicle

The vehicle has a frontal cross -sectional area of 1.9 m^2. The roadway has a straight alignment and a badly patched and broken asphalt surface. assume a drag coefficient of 0.3 and p of air of 1.29 kg/m^3

  Determine the angle theta as a function of delta t

At the reference temperature, three identical rods of length L form a pin jointed truss in the shape of an equilateral triangle, ABC. Determine the angle theta as a function of delta T, the temperature increase of the rod AB.

  Find the weight per lineal foot for a normal weight of beam

the unit weight of normal weight reinforced concrete is commonly assumed to be 150 lb/ft cubed. find the weight per lineal foot (lb/ft) for a normal weight reinforced concrete beam that: a. has a rectangular cross section 16 in.

  Calculate the force of water hitting a concrete cylindrical

How do you calculate the force of water hitting a concrete cylindrical pole. The velocity of the water is 2 ft/s, the depth of the water is 10 ft, and diameter of the pole is 3 ft. So what would be the total force exerted on the pole by the water?

  Determine the design speed and length of the curve

A horizontal curve is designed for a two-lane road in a mountainous terrain. The following data are known: Deflection angle: 40 degrees Tangent: 436.76 Station of PC: 2695 + 73.89 Side friction factor = 0.12 Superelevation = 8% Superelevation run-off..

  Relationship between speed and safety in geometric design

A light spring of a constant k=90.0 N/m is attached vertically to atable. A 2.00g balloon is filled with helium (density 0.180 kg/m^3)to a volume of 5.00m^3 and is then connected to the spring, causingit to stretch. Determine the extension distance L..

  Calculate the total head loss for water flowing at 10

Calculate the total head loss for water (25°C) flowing at 100 m3/hr as shown in the following figure. The total flow length is 250 meters and the pipe is 15-cm diameter cast iron pipe

  How far will the column of mercury in the tube be depressed

An open clean glass tube, having a diameter of 3 mm is inserted vertically into a dish of mercury at 20c .How far will the column of mercury (S.G =13.6) in the tube be depressed in (mm) given the following information. Theta = 130 and surface tens..

  Estimate particle size that will be collected with 50percent

The inlet gas velocity is 16m/s and the particle density is 1.6 gm/cc. The working temperature of the process is 400K. Estimate the particle size that will be collected with 50 percent collection efficiency.

  Why is the anchorage capacity of a standard hook not

Why is the anchorage capacity of a standard hook not increased by extending the bar well beyond the end of the hook?

  What is the pressure difference measured by the manometer

The "U"-tube manometer containing mercury of density 13600 kg/cubic meters is used to measure the pressure drop along a horizontal pipe. If the fluid in the pipe has a relative density of 0.8 and the manometer reading is 0.6 meters

  How much lime must be added to react with the alum

If 110 mg/L Alum (Al2(SO4)3 14H2O) is added to water containing a natural alkalinity of 20 mg/L as CaCO3, 1) how much lime (mg/L as CaO) must be added to react with the alum 2) How much precipitate (mg/L as Al(OH)3 ) is formed

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd