How many trips would one rubber-tired herrywampus have

Assignment Help Civil Engineering
Reference no: EM13306965

How many trips would one rubber-tired Herrywampus have to make to backfill a space with a geometrical volume of 5400 cubic yard? The maximum capacity of the machine is 30 cubic yard (heaped), or 40 tons. The material is to be compacted with a shrinkage of 25% (relative to bank measure) and has a swell factor of 20% (relative to bank measure). The material weighs 3,000 lb/cu yd (bank). Assume that the machine carries its maximum load on each trip. Check by both weight and volume limitations

Reference no: EM13306965

Questions Cloud

Compute the friction force acting between wheel and surface : A wheel (radius 0.6 m) is rolling on a horizontal surface with a center of mass acceleration of 0.7 m/s2. compute the friction force acting between the wheel and the surface
Determine the required slab thickness of subgrade reaction : the reliability is to be 95%, the overall standard deviation is 0.4, the drainage coefficient is 0.9, delta PSI is 1.7 ( with TSI of 2.5), and the load transfer coefficient is 3.2. the modulus of subgrade reaction is 200 lb/in^3.
Determine the percent overload if load estimate is correct : A customer estimates that he is getting 30 cubic yards (loose) of gypsum in his scraper. Determine the percent overload if the load estimate is correct. The maximum load capacity of the scraper is 84,000 pounds.
Determine how much time will the clocks differ in time : Suppose two highly precise, identical clocks are synchornized and one clock is placed at the North Pole and one clock is placed at the equator. After 100 years, how much time will the clocks differ in time
How many trips would one rubber-tired herrywampus have : How many trips would one rubber-tired Herrywampus have to make to backfill a space with a geometrical volume of 5400 cubic yard. The maximum capacity of the machine is 30 cubic yard (heaped), or 40 tons.
What is the moment of inertia of the door about the hinges : A sheet of plywood 1.39 cm thick is used to make a cabinet door 55.5 cm wide by 69.5 cm tall, what is the moment of inertia of the door about the hinges
How many after-tax dollars : How many after-tax dollars did she receive per year from Policy A?
Determine the unit strain developed in the concrete : a concrete test cylinder is loaded with p= 100k (445 kn) and resulting shortening of 0.036" (0.0914 mm). determine the unit strain developed in the concrete.
Obtain the heat added to the gas : One mole of neon, a monatomic gas, starts out at conditions of standard temperature and pressure. find the heat added to the gas

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine what is the stationing of the pt

A crest vertical curve and a horizontal curve on the same highway have the same design speed. The equal-tangent vertical curve connects a +3% initial grade with a +1% final grade and has a PVC at 101+78 and a PVT at 106+72

  Determine what is the doubling time in units of days

A pig farmer owns a 20-arce farm and started business with 22.1 pigs. After one year, he has 319 pigs. Assuming a constant growth rate, what is the doubling time in units of days.

  Find length and width of square basin for virus disinfection

Find the length and width of a square basin for virus disinfection of a flow of 6 MGD. You may assume a depth of 5 ft, a C•t product of 10 (mg/L) •min for 1.5-log removal, and a target free chlorine residual of 0.6 mg/L.

  Determine the concentration of the sodium ion in solution

A mass of .525g of NaCl has been added to a cylinder containing water. The cylinder diameter is 1.5in and depth of water in 5inches. Determine the concentration of the sodium ion in solution, showing your ans in units of a) mg/L b) mass % and c) m..

  Compute the flow rate in the channel and the critical depth

The water depth before the jump is 0.4 m and after the jump is 1.7 m. Compute the flow rate in the channel, the critical depth and the headloss in the jump.

  Claculate the magnitude and direction of the resultant force

the structure has a curved face being part of a circle with radius R = 32M. The dam holds water to a height = 28 m. Claculate the magnitude and direction of the resultant force per metre length of the dam wall

  Determine what is the minimum standard size that is needed

a mountain water reservoir in a national park is to provide water at a flow rate of Q= 200 gpm and a minimum pressure of 40 psig in the lodge of the valley 200 ft below the reservoir.

  Solve for steady-state concentration of both compounds

Atrazine, a neutral triazine herbicide manufactured by the Ciba-Geigy group, undergoes biological and chemical decomposition to formhydroxy-atrazine. a).Assuming a pseudo first order decay constant of 0.01/day for atrazinr and 0.005/dayfor hydroxy..

  Determine maximum amount fabco should be willing to pay

Fabco, Inc., is considering purchasing flow valves that will reduce annual operating costs by $10,000 per year for the next 12 years. Fabco's MARR is 7 percent/year. Using an internal rate of return approach

  Determine the velocity at x of a particle moves along x-axis

A particle moves along the positive x-axis with an acceleration in meters per second squared which increases linearly with x expressed in millimeters, as shown on the graph for an interval of its motion.

  What criteria should zachary use evaluate the project

what criteria should Zachary use evaluate the project ?

  Calculate the bearing stress on the shaft key

A rotating shaft with an applied torque of 400 Newton-meters is held in place (stopped) by a shaft key. The diameter of the shaft is 15 centimeters. The shaft key has a length of 20 cm, and is square, with its width and height being 5 cm.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd