How many students have heights equal to 68 inches

Assignment Help Civil Engineering
Reference no: EM13318450

If the height of 300 students are normally distributed with mean 68.0 inches and standard deviation 3.0 inches, how many students have heights, (a) Greater than 72 inches (b) Less than or equal to 64 inches (c) Between 65 and 71 inches inclusive (d) equal to 68 inches * Assume the measurements to be recorded to the nearest inch.

Reference no: EM13318450

Questions Cloud

Find probability that in sample of bulbs will be defective : Find the probability that in a sample of 100 bulbs, (a) 0 bulbs will be defective (b) 1 bulbs will be defective (c) 2 bulbs will be defective (d) 3 bulbs will be defective (e) 4 bulbs will be defective (f) 5 bulbs will be defective
What is the minimum grade a student must get in order : The mean grade on a final examination was 72, and the standard deviation was 9. The top 10% of the students are to receive A's. What is the minimum grade a student must get in order to receive an A
Explain the total molar concentration of all the ions : What is the total molar concentration of all the ions in 0.020 M solutions of the following salts in water. 0.020 M KCl = ____ M ions 0.020 M CuSO4 = ____ M ions 0.020 M CaCl2 = ____ M ions
What is the amount of depreciation expense for 2014 : What is the amount of depreciation expense for 2014?
How many students have heights equal to 68 inches : how many students have heights, (a) Greater than 72 inches (b) Less than or equal to 64 inches (c) Between 65 and 71 inches inclusive (d) equal to 68 inches * Assume the measurements to be recorded to the nearest inch.
Explain the molar concentration of na+ ions solutions : What is the molar concentration of Na+ ions in 0.035 M solutions of the following sodium salts in water
Explain how the foundation will be founded at a depth of 1m : Above the water table the soil mass unit weight is 16 kN/m^2. Below the water table the saturated unit weight is 19.5kN/m^2. The maximum column load is 330,000 lbs. Recommend the number and depth of borings.
The amount of the increase or decrease : How is the adjustment recorded? Indicate each account affected, whether the account is increased or decreased, and the amount of the increase or decrease.
Find the wavelength as measured by an earth observer : A star is moving away from Earth at a speed of 2.3x10^8 m/s. find the wavelength as measured by an Earth observer

Reviews

Write a Review

Civil Engineering Questions & Answers

  What is the magnitude and direction of specific discharge

Groundwater moves through a sandstone porous media and is driven by a gradient of -0.05 directed at an angle of 60 degree counterclockwise from the x-axis.

  What is overall product water recovery and salt rejection

Each stage can perform 60 % water recovery (Qp/Cf) and 90% salt rejection (1-Cp/Cf) A) What is the overall product water recovery and salt rejection b)what is final product water flow rate (m^3/day) and quality in terms of TDS (mg/L).

  At what speed in stillwater will cavitation first occur

A sphere L ft in diameter is moving horizontally at a depth of 12 ft below a water surface where the water temperature is 50°F. v max = 1.5 V0. where V0. is the free stream velocity and occurs at the maximum sphere width.

  Determine the bending moment at the intermediate support

The left-hand span is 16 ft and the right-hand span is 20 ft. The beam supports a uniform load of 900 plf, which includes its own weight, over the entire 36 ft and also a concentrated load of 10,000 lb applied at a point that is 5 ft from the left..

  Determine the pressure variation in the flow field

A plane flow field is developed by addition of a free vortex and a uniform stream in the positive x direction. If the vortex is located a distance a from the origin, find the pressure variation in the flow field.

  Determine the factor of safety for the given design

There are three 18 mm diameter steel bolts that are attached to a plate. The plate can support up to a 110 KN load, and the ultimate shear stress is 360 MPa. Determine the factor of safety for the given design.

  Will water bubble into the vapor phase under the circumstace

A student in the laboratory plans to exert a vacuum in the head space above a surface of water in a closed tank. She plans for the the absolute pressure in the tank to be 10,400 Pa. The temperature in the lab is 20°C.

  Balancing of reciprocating engines

If the engine is mounted solidly on a rigid foundation, what is the alternating force amplitude transmitted? Assume the connection rod to be of infinite length.

  Determine what is the stationing of the pt

A crest vertical curve and a horizontal curve on the same highway have the same design speed. The equal-tangent vertical curve connects a +3% initial grade with a +1% final grade and has a PVC at 101+78 and a PVT at 106+72

  Will the ship take more or less draft when steaming

A 245 m ship has a displacement of 3x10^8N,and the area defined by the waterline is 3550m^2. will the ship take more or less draft when steaming from salt water to fresh water How much will it settle or rise

  Find the absolute value of the magnitude of force vector

Find the absolute value of the magnitude of force vector B if the resultant force= 1000 lb, force vector A= 1000 lb, and the resultant forms a 45 degree angle with B, and vector B runs parallel to the y axis.

  Estimate length of pipeline required for the friction losses

Water leaves a reservoir at 0.05 m^3/s through a 200-mm riveted steel pipeline that protrudes into the reservoir and then immediately turns a 90º bend with a local (minor) loss coefficient equal to 0.3.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd