How many pounds of coal must be burned to keep one bulb

Assignment Help Civil Engineering
Reference no: EM13317032

how many pounds of coal must be burned to keep one 100 watt light bulb lit for one hour? Assume efficiency of the power plant is 35%, the transmission losses are 10% fo the delivered poer, and the heating value of coal is 12,000 BTU/lb

Reference no: EM13317032

Questions Cloud

What is the wavelength in the string : A 125-cm-long, 5.0 g string oscillates in its n = 2 mode with a frequency of 190 Hz, What is the wavelength in the string
Find the direction of the force experience by the wire : A rectangular loop of wire enter a 2.0 T magnetic field with velocity of 10 m/s, find the direction of the force experience by the wire
What shear resistance is to be expected in direct shear test : Samples of a dry sand are to be tasted in a direct shear test and a triaxial test. In the triaxial test, the sample fails when the major and minor principal stresses are 140 psi and 40 psi, respectively.
Describe the use of arrays and subscripts : Be typed, double spaced, using Times New Roman font (size 12), with one-inch margins on all sides; citations and references must follow APA or school-specific format. Check with your professor for any additional instructions.
How many pounds of coal must be burned to keep one bulb : how many pounds of coal must be burned to keep one 100 watt light bulb lit for one hour. Assume efficiency of the power plant is 35%, the transmission losses are 10% fo the delivered poer, and the heating value of coal is 12,000 BTU/lb
Find the angle of incidence : Total internal reflection will occur when the refraction angle is 90' degrees or more. find the angle of incidence at which total interanl refraction in water will occur
Prepare the manufacturing overhead cost budget : Prepare the direct material usage budget and the direct material purchases budget and prepare the direct manufacturing labour cost budget - prepare the manufacturing overhead cost budget.
Seated scribe represents-amarna period in ancient egypt : The Seated Scribe represents: During the Amarna Period in Ancient Egypt: warrior A from Riace represents: The Pont du Gard was built to be used as a (n):
Evaluate the rates of linear and angular deformation : Consider the pressure-driven flow between stationary parallel plates separated by distance 2b. Coordinate y is measured from the channel centerline. The velocity field is given by u=u max(1-(y/b)^2).

Reviews

Write a Review

Civil Engineering Questions & Answers

  Tensile modulus of elasticity

Calculate the tensile modulus of elasticity for a 10 laminated composite consisting of 62 percent by volume of unidirectional carbon fibers and an epoxy matrix under isostress conditions.

  Explain some of the benefits of physical models and mock-ups

Describe some of the benefits of physical models and mock-ups. What data are required to measure the following cost-effectiveness, system effectiveness, operational availability, and life-cycle cost?

  Determine groundwater flow per unit width of the aquifer

The piezometer A is located 4,000 ft south of piezometer B.  Approximately 3,000 ft of piezometer B there is a river with an elevation relative to sea level of about 455 ft.

  Determine what is the change in head across the turbine

A 0.9 efficient Francis turbine produces 200 MW with a speed of 150 rpm. The blade height is 1.0 m, and the inlet radius of the rotor is 7.0 m. The flow exits the turbine in a radial direction.

  Determine the velocity and thermal boundary layer thickness

Engine Oil at 60 degrees C flows over a 3m long and 2m wide plate whose temperature is maintained at 20 degrees C with a velocity of 2 m/s. Determine the rate of heat transfer from the entire plate.

  Determine the required area of the members

The truss is to be constructed of members with equal cross-sectional areas and using a material with yield stress 700 MPa. The structure must be designed to support a mass (m) of 3400 kg with a factor of safety of 3.

  Find the void ratio and specific gravity of solids

A specimen of saturated soil has a water content of 145 percent and a total unit weight of 84 pcf. Find the void ratio and specific gravity of solids.

  Design simple horizontal curve to connect roadway tangents

Design a simple horizontal curve to connect two roadway tangents that deflect at an angle chosen between 50 and 75 degrees. Assign a station to the curve PI and select a curvature of 6 degrees.

  What would the salt concentration be in the brine

A reverse osmosis plant desalinates 5X10^6 L/day of feedwater containing 1500 mg/L of salts, yielding 3X10^6 L/day of product water with 75 mg?l of salt. What would the salt concentration be in the brine?

  Develop the relation between bulk unit weight

develop the relation between bulk unit weight, specific gravity, void ratio and weight of water.

  Write a c program that calculates the factorial of numbers

Write a C program that calculates the factorial of the number from 0 to the integer N, which is not greater than 10

  Determine the direction of the resultant force measured

If F_1=470N and theta=26 degrees, determine the magnitude of the resultant force of the three forces acting on ring A. Determine the direction of the resultant force measured counterclockwise from the positive x-axis.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd