How large should the gaps be to allow temperatures up

Reference no: EM13996696

Steel rails 24.0 m long are laid end to end with gaps between them to account for thermal expansion.

Part A. If the track is laid when it's 15 ^oC, how large should the gaps be to allow temperatures up to 35 ^oC? Express your answer to two significant figures and include the appropriate units.

Part B. If the track is laid using the gaps you found in part (a), how large will the gaps be on a -21 ^oC winter morning? Express your answer to two significant figures and include the appropriate units.

Reference no: EM13996696

Questions Cloud

What must be the direction of the current : What must be the direction of the current I? explain What is the magnitude of the current? If A is the same distance from the wire as is D, draw the direction of the result magnetic field at point A.

How modern liberalism varies from classical liberalism : So who would like to explain how modern liberalism varies from classical liberalism? In addition, in what ways is classical liberalism similar to conservatism today

Describe four duties of the controlling contractor on a site : Explain the difference in fall protection requirements for connectors working in steel erection between 15 feet and 30 feet in height and connectors working more than two stories or 30 feet in height.

What is the increase in its length : A steel pipe has a length of 10.7 metres at 20C. What is the increase in its length if the steam at 420C runs through this pipe? The coefficient of expansion for steel is 11x10-6 m/ 0Cm.

How large should the gaps be to allow temperatures up : Steel rails 24.0 m long are laid end to end with gaps between them to account for thermal expansion. If the track is laid when it's 15 oC, how large should the gaps be to allow temperatures up to 35 oC? Express your answer to two significant figures ..

What is the percent inaccuracy due to meter resistance : What reading will a voltmeter, of internal resistance 91 Ω, give when used to measure the voltage across each resistor? What is the percent inaccuracy due to meter resistance for each case?

What temperature should the ring be warmed : A steel ring with a 2.500 in diameter at 20 degrees Celsius is to he warned and slipped over a brass shafts with a 2.5030 in outside diameter at 20 degrees Celsius To what temperature should the ring be warmed?

What is length of the combination rod at this temperature : A steel rod 1.00m in length is welded to the end of a 2.00m aluminum rod (where the initial lengths were measured at 22C). The combination rod is then heated to 200C. What is the length of the combination rod at this temperature?

Calculate the tension in the string at the concert : For steel, Young's modulus is 2.0 x 1011 N/m2; and the coefficient of linear expansion is 1.2x 10-5/Co. Use your knowledge of linear thermal expansion and stress to calculate the tension in the string at the concert.

User Account

All Pages