How fast will the sleeve slide down the rod

Assignment Help Civil Engineering
Reference no: EM13540140

A sleeve 30 cm long encases a vertical rod 2.5 cm in diameter with uniform radial clearance of 0.005 cm. when the sleeve and the rod are immersed in a pool of oil with dynamic viscosity of 0.095 kg/m.s, the effective weight of the sleeve is 4.5N. how fast will the sleeve slide down the rod?

assumptions:

Neglect drag on the outer portion of the sleeve

Assume weight and viscous forces to be in equilibrium

Assume constant velocity gradient in the oil between the sleeve and rod

Reference no: EM13540140

Questions Cloud

The ratio of volumetric strain to diametral strain is : A w24x192 of a242 steel is to be used as a beam. what are the values of yield stress Fy ultimate tensile stees Fu and modulus of elasticity E for this beam?
What are the possible water levels in the tank at the end of : A cylindrical tank is used to store water for a town. on any given day, the water supply inflow per day may fill the tank with additional 6, 7, or 8ft of water
Find the stress in the cable when the truck comes : A tow truck is using a cable to pull a car up a 15 degree hill. If the car weighs 4000 lbs and the cable has a diameter of .75 inches, find the stress in the cable when the truck comes to a stop while on the hill. Ignore friction between the car and ..
Will the pesticides threaten the fish population during the : In the summer, the density at the top of the lake is 997 kg/m3, and at the bottom is 1000 kg/m3. Would you predict stratification to be present, and if so assume an epilimnion depth of 4m. Will the pesticides threaten the fish population during the s..
How fast will the sleeve slide down the rod : A sleeve 30 cm long encases a vertical rod 2.5 cm in diameter with uniform radial clearance of 0.005 cm. when the sleeve and the rod are immersed in a pool of oil with dynamic viscosity
Select the required commercial size of the rod required to : Two forces are applied as shown to hook support. Knowing that the magnitude of P is 35 N, determine by trigonometry (a) the required angle a if the resultant R of the two forces applied to the support is to be horizontal, (b) the corresponding magnit..
Is this level dangerous to the fish population : A lake has a volume of 750,000 m3 (dimensions 15 m deep, 100 m wide, and 500 m long) and behaves as two completly mixed cells. Cell 1 makes up 40% of the lake ( dimensions 15 m deep, 100 m wide, and 200 m long) cell 2 makes up 60% of the lake (dimens..
Computer the percent voids in total mix : An aggregate blend is composed of 53% coarse aggregate by weight (sp. gr. 2.702), 43% fine aggregate (sp. gr. 2.621), and 4% filler (sp. gr. 2.779)/ The compacted specimen contains 6% asphalt binder (sp. gr. 1.052) by weight of total mix, and has a b..
What are the normal stresses in the bars afterward : Two aluminium bars (E = 70 GPa) are attached to regid support at the left and a cross-bar at the end. An iron bar (E = 200 GPa) is at attached to the rigid support at the left and there is a gap b = 0.6 mm between the right end of the iron bar and cr..

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine what is the required thickness of the plate

a spherical container with a diameter of 50 ft made of steel plate holding a gas at 50 psi. with a tensile strength of 16000. What is the required thickness of the plate

  What percent removal of organic matter

If the BOD5 of the river below the mill outfall must not exceed 5 mg/L, what percent removal of organic matter (BOD5) is required by the mill to meet this requirement?

  Find cable forces f-q and p is directed along the z-axis

The vertical post is secured by three cables. The cables are pre-tensioned so that the resultant of the cable forces F, Q, and P is directed along the z-axis. If F =120lb, find P and Q.

  Estimate the first derivative of f

Write a script newquot.m that uses the Newton quotient, [f (x + h) - f (x)]/h, to estimate the first derivative of f (x) = x3 at x = 1, using successively smaller values of h: 1, 10-1, 10-2, and so forth. Use a function M-file for f (x).

  Design the appropriate reinforced concrete footing on a soil

A combined footing is subjected to an exterior 16 in. x 16 in. column abutting the property line carrying a total service load Pw = 300,000 lb and an interior column 20 in. x 20 in.

  Calculate the surface area of the clay particles

The surface area of clay particles can be determined by measuring the number of adsorbate molecules it takes to form a monolayer. The adsorbate molecules used for these measurements are usually N2 gas, therefore partial pressure "P" is used instea..

  Determne the angular velocity at the instint theta

When theta=0 degrees , the assembly is held at rest, and the torsional spring is untwisted. If the assembly is released and falls downward, determne the angular velocity at the instint theta=90.

  Determine volume of reactor needed for each hydraulic regime

The kill of pathogens by disinfection in water treatment can be described by a first order reaction. Complete a reactor comparison for a batch reactor, CSTR and PFR for disinfection. The treatment plant produces 100 L/s of water.

  Find how much existing highway must be reconstructed

The overpass structure is to be level, centered 26 feet above the railroad, and 180 feet long. How much existing highway (in feet) must be reconstructed to provide appropriate vertical alignment

  Estimate the amount of coal needed to light one 100-w

A 25-W compact fluorescent lightbulb (CFL) produces the light equivalent of a 100-W incandescent bulb. The population of North America is estimated to be about 305 million.

  Determine maximum and minimum values of x displacement

a= -10 (1/sec^2 ) x where x is the displacement of the mass in meters. If the initial position is -1 m and the initial velocity is +1 m/sec, find: (i) the velocity when x = 0 for the first time and (ii) the maximum and minimum values of x.

  What is the minimum coefficient of road adhesion needed

The owners wish to achieve an initial acceleration from rest of 22 ft/(sec^2) on a level paved surface. What is the minimum coefficient of road adhesion needed to achieve this acceleration

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd