How does the proposed 4.5 gw installed wind power

Assignment Help Electrical Engineering
Reference no: EM13963263

You have been appointed as an advisor to recommend on the type and location of the new power stations. After extensive research you concluded that by 2025:

-The total installed electric capacity must be 90 GW (This includes a 15% spare capacity)

-20% of electricity will come from renewable sources (25 % Wind and 75 % Solar Thermal)

-10% will be imported (mainly from Mozambique and the DRC)

-15% will be from nuclear power stations (base load)

-5% will be from combined cycle gas turbines

-40 % will be from coal power stations (base load)

-4 % will be pumped storage capacity

-5 % will be peaking gas turbines

-1 % will be peaking hydro

The focus of this project will be on the conventional technologies (the last 6 on the list). Convert the percentages above to installed capacity in MW for each type of power station.

A total of 4% of 90 GW for pumped storage was suggested for 2025. This amounts to a total installation of 3.6 GW of pumped storage. What is the current installed pump storage capacity in SA? It can be assumed that the current installations will remain in service beyond 2025 provided that they are well maintained. What is the total additional pump storage need?

How does the proposed 4.5 GW installed wind power (25% of 20% of 90GW) contribute to the need for pump storage?

Reference no: EM13963263

Questions Cloud

Electricity is produced at a rate of 8.4 x 10^15 j/yr. : What fraction of the total rate of U.S. electricity production in 1980 does 2.67 x 10^8 W correspond to? Here are some facts that go along with the problem
Resistance to organizational change : Read about resistance to change in an article titled "The Tower of Babel and the Ralley Driver: Understanding and Negotiating through Resistance to Organizational Change" located at http://www.regent.edu/acad/global/publications/jpc/vol1iss2/cohen..
What are the benefits of using javascript : Write a 150-word synopsis on how JavaScript is used to add functionality to a website. What are the benefits of using JavaScript for this application?
How the submission engine plan will handle submissions : Explain how the submission engine plan will handle submissions in other languages, including Portuguese and Mandarin. Explain how you will use technologies to help alleviate the concerns that the content is biased toward technology professionals and..
How does the proposed 4.5 gw installed wind power : The focus of this project will be on the conventional technologies (the last 6 on the list). Convert the percentages above to installed capacity in MW for each type of power station.
How that organization can use distributed access : Write a 1,000- to -2,000-word that discusses how that organization can use distributed access control between partners and itself, both to and from its systems. Identify two likely partners that would need access to its systems in this way and two..
Types of draperies at two different locations : The Janie Gioffre Drapery Company makes three types of draperies at two different locations. At location I, it can make 10 pairs of deluxe drapes, 20 pairs of better drapes, and 13 pairs of standard drapes per day.
Detailed brief for your organization board of directors : You are the CISO (and Incident Response manager) for this organization. Your task is to prepare a detailed brief for your organization's board of directors, describing & discussing: What happened. The impact of what happened
What is the current drawn by a 75.0-w light bulb : An object is placed 20 cm from a converging spherical lens. Give the general characteristics of the image for a lens with a focal length of f = 25 cm.

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Find the impedance-current and voltage across rparallel to c

For a RLC Circuit: V=110V (rms) at 50Hz; R=5 ohms; L=50mH; C=0.1 mF; find the impedance, current, voltage across R parallel to C, peak electric energy, peak magnetic energy and stored energy.

  Write down state and output equation in canonical form

Given transfer function of dynamic system: T(s)= (2s^2 + 2s + 3) / (s^3 + 4s^2 + 6s + 10). write down state equation and output equation in Controllable Canonical Form and in Observable Canonical Form.

  Design a combinational circuit with five inputs and outputs

Design a combinational circuit with five inputs and two outputs. The inputs are D2, D1, D0, and C1 and C0. The circuit calculates the remainder R1 and R0 of the division of the binary number

  Find the probability that a transmitted bit is received

A variant of the binary symmetric communication channel described in class is called a binary erasure channel. The transmitter sends a ‘0' or ‘1,' but at the receiver there are three possibilities: a ‘0' or ‘1' or ‘undecided bit..

  Calculate both doping densities in silicon junction

A silicon (ni= 10^10 cm^-3) p-n junction diode has a maximum electric field of -10^6 V/cm and a depletion layer width of 1 um. The acceptor density in the p-type region is four times larger than the donor density in the n-type region.

  Practical scada systems for industry

IDC Technologies. Practical SCADA Systems for Industry - As its name suggests, SCADA has been around for as long as process control and data acquisition existed.

  Determine values of resistance-r and capacitance-c

A resistor R, capacitor C, and voltage source Vs= 100 cos 300t Vare all in series. If the average power dissipated by the resistor is 150 W and the rms capacitor voltage is $) V, determine R and C.

  Electronic and physical threats to communications networks

What are the predominant electronic and physical threats to communications networks?

  Determine what is the mobilty of the minority carriers

a small cocentration of minority carrier is injected into ahomogeneous semiconductor crystal at one point. An electric feild of 10 V/cm is applied across the crystal and this moves theminority carriers a distance of 1cm in 20μsec.

  Determine must the fluid be compressible or incompressible

suppose that in the fluid-low analogy for an electrical circuit analog of electrical currentis volumetric flow rate with units of cm^3/s. For a proper analogy to electrical ciruits, must the fluid be compressible or incompressible

  What is the magnitude of the induced emf per phase in rotor

A three-phase induction motor operates at a slip of 3% and has a rotor copper loss of 300W. The rotational loss is 1500W. Determine (a) The air-gap power (b) The power output (c) If the rotor impedance is 0.2+j0.8 ohm/phase,

  Find the electic field everywhere on the x axis

Two point charges of equal magnitude q are positioned at z= +/- d/2. (A) Find the electic field everywhere on the z axis. (B) Find the electic field everywhere on the x axis. (C) Repat steps A and B if the charge at z= +/- d/2 is -q instead of +q

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd