How does pressure vary with depth along the wall of the dam

Assignment Help Physics
Reference no: EM13541782

Hoover Dam was built in the 1930s to provide electricity for the southwest U.S. and to prevent the wild Colorado River from flooding. Hoover Dam is about 380 m wide and is about 221 m high. Assume that Hoover Dam can be approximated by slab geometry with a width of 380 m (W). What is the total force (newtons) on the dam face if the water level from Lake Mead (holding basin for Hoover Dam) is 212 m? Assume the density of water in Lake Mead is 1000 kg/m3. (Hint: you should be able to do this problem without doing an integral. Ask yourself, how does pressure vary with depth along the wall of the dam? Therefore, at what depth will the pressure equal its average over the whole face of the dam?)

Reference no: EM13541782

Questions Cloud

What is the speed at which the water leaves the faucet : The water supply of a building is fed through a main pipe 6.00 cm in diameter. A 3.00 cm diameter faucet tap, located 1.00 m above the main pipe, What is the speed at which the water leaves the faucet
Determine at what rate does water flow through the pipes : A horizontal pipe 10 cm in diameter has a smooth reduction to a pipe 5 cm in diameter. at what rate does water flow through the pipes
Find the speed of the water at the nozzle : A water hose 4.00 cm in diameter is used to fill a 25.0 L bucket. If it takes 3.00 min to fill the bucket, If the hose has a nozzle 2.00 cm in diameter, find the speed of the water at the nozzle
Find the forces acting on the top and on the bottom of block : A 14.0 kg block of metal measuring 12.0 cm x 10.0 cm x 10.0 cm is suspended from a scale and immersed in water. find the forces acting on the top and on the bottom of the block
How does pressure vary with depth along the wall of the dam : Hoover Dam was built in the 1930s to provide electricity for the southwest U.S. and to prevent the wild Colorado River from flooding. how does pressure vary with depth along the wall of the dam
What is the total intensity at the center of your brain : A bluetooth headset has an intensity of 0.08 W/m2 at 5 cm distance. what is the total intensity (headset plus phone) at the center of your brain
Calculate point-to-point data bandwidth requirements : Discuss Performance Architecture and IP-QoS mechanisms which could be deployed to meet QoS expectations of the users for the data and voice traffic on this network.
A turn on a racetrack has a radius of curvature : A turn on a racetrack has a radius of curvature of 2000 ft and a bank angle theta. If cars travel at 140 mph through the turn find a) the minimum bank angle so the cars won't slip sideways during the turn.
A tetherball apparatus consists of a ball : A tetherball apparatus consists of a ball attached to a 2.10 m rope that is attached in turn to the top of a 2.50 m tall pole. The ball is struck such that it moves horizontally around the pole. Immediately after the ball is struck, it moves at 3.34 ..

Reviews

Write a Review

Physics Questions & Answers

  Find the magnitude of the resulting magnetic field

A sphere of radius R is uniformly charged to a total charge of Q. It is made to spin about an axis that passes through its center with an angular speed ω. Find the magnitude of the resulting magnetic field at the center of the sphere.

  Find the equivalent resistance

A resistor is in the shape of a cube, with each side of resistance  R . Find the equivalent resistance between any two of its adjacent corners.

  What is the electric field at the location

Question: Field and force with three charges? What is the electric field at the location of Q1, due to  Q 2 ?

  What is the maximum displacement of the bridge deck

What is the maximum displacement of the bridge deck?

  What is the magnitude of the current in the wire

What is the magnitude of the current in the wire as a function of time?

  Blackbody

Questions on blackbody, Infra-Red Detectors & Optic Lens and Digital Image.

  Gravity conveyor

Illustrate the cause of the components accelerating from rest down the conveyor.

  Calculate the dc voltage

Calculate the dc voltage applied to the circuit.

  Quadrupole moments in the shell model

Quadrupole moments in the shell model

  Determine the tension in each string

Determine the tension in each string

  Introductory mechanics: dynamics

Calculate the smallest coefficient of static friction necessary for mass A to remain stationary.

  Evaluate maximum altitude

Evaluate maximum altitude?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd