How do these compare with the observed deflections

Assignment Help Civil Engineering
Reference no: EM131012280

Using the modulus of elasticity as determined from the graph, calculate the center deflections of the wood for a load of 400 Ibs., and for the load at the last reading taken before rupture occurred. How do these compare with the observed deflections?

1422_deflection.png

Reference no: EM131012280

Questions Cloud

About the growing annuity payments : You want to accumulate $2 millions by your retirement date, which is 25 years from now. You will make 25 deposits in your bank, with the first occurring today. The bank pays 6.11% interest, compounded annually.
Where are you planning to look for sources : Choose a specific area within your chosen career field or field of study and perform research to identify an existing problem and a proposed solution(s) to the problem.
A corporation has shares of par value stock : A corporation has $50,000 shares of $25 par value stock stock outstanding that has a value of $120. If the corporation issues a 5-for-1 stock split, the par value of the stock will be: a. $5 b. $60 c. unchanged d. $24
Question survey that measures customers preferences : A company's cereal is not selling well. Create a 10-15-question survey that measures customers' preferences for the company's cereal product. Later, answer the following questions:
How do these compare with the observed deflections : Using the modulus of elasticity as determined from the graph, calculate the center deflections of the wood for a load of 400 Ibs., and for the load at the last reading taken before rupture occurred. How do these compare with the observed deflecti..
How the data can be presented as ratio : Describe the successive loss of information as the presentation changed from ratio to nominal.
Analyze the effect of the current government type : Describe the relationship between the locations of internal core/periphery areas and the location of different types of natural resources (including water bodies and arable land) and energy supplies within each country.
Identify the title author and context of the selection : Conclusion: Briefly restate the key points of your critical response to reinforce them in the reader's mind. End with a strong concluding line that nicely sums up your response or puts the issue in a larger context.
Growing annuity payments : You want to accumulate $2 millions by your retirement date, which is 25 years from now. You will make 25 deposits in your bank, with the first occurring today. How much must your first deposit be to meet your goal? Round your answer to the nearest ce..

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculate the mass flow rate of methane in g per min

A previously calibrated rotometer is being used to measure a gas flow. Calculate the true volumetric flow rate of methane in the rotometer whe. The rotometer reads 4.0.

  How large could the plant be without having the ground level

A 35 percent-efficient coal-fired power plant with effective height of 100 m emits SO2 at a rate of 0.6 lb/10^6 Btu into the plant. If winds are assumed to be 4 m/s at the stack height and just over 3 m/s at 10 m

  Determine what is the total resistance of the loads

You have 4 resistors (loads) in parallel. What is the total resistance of those loads The loads are as follows 4ohms, 6ohms, 16ohms and 1 ohms. When calculating 1/R, round to the fourth decimal point. Percentage of error margin is 0.5

  Draw bending moment diagram and deflected shape of fix beam

Draw Bending moment diagram and deflected shape of the fix beam when temperature T1 is outside temperature and T2 is inside temperature and T1 is greater than T2.

  Calculate minimum set-back distance required for highway

Calculate the minimum set-back distance required for a national highway of 4 lane divided carriageway having circular curve of radius of 350 m & design speed 100 km/hr.

  Calculate depth downstream of jump and energy loss in jump

A hydraulic jump occurs in an rectangular channel 2.3 m wide when the discharge is 2.5 m^3/s. If the upstream depth is 0.25 m calculate the depth downstream of the jump and the energy loss in the jump.

  What is the total lenth ac and its standard deviation

A line AC was observed in 2 sections AB and BC, with lengthsand standard deviations listed below. What is the total lenth AC and its standard deviation?

  Find what is the future worth at 15 years of the investment

general price inflation is estimated to be 3% for the next 5 years, 5% the 5 years after that, and 8% the following five years. If you invest $10,000 at the market rate of 10% for those 15 years,

  What is the probability that the channel will be overtopped

If the channel is overtopped for 2 years in a row, renovation cost will increase too much. What is the probability that the channel will be overtopped for only 2 years in a row in a 4 year period

  What torque is required to drive the disk at 660 rpm

A disk spins within an oil-filled enclosure, having 2.4 mm clearance from flat surfaces each side of the disk. The disk surface extends from radius 12 to 86 mm.

  A simple rankine cycle uses water as the working fluid the

a simple rankine cycle uses water as the working fluid. the boiler operates at 6000 kpa and the condenser at 50 kpa. at

  How much caco3 is produced per hour

A slurry containing 20 percent by weight of limestone (CaCO3) is processes to separate pure dry limestone from water. If feed rate is 2000kg/h, how much CaCO3 is produced per hour?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd