Heat treatment and toughness and hardness

Assignment Help Mechanical Engineering

Reference no: EM13711498

The relationship between heat treatment and toughness and hardness i.e. briefly explain why the different heat treatments give different toughness and hardness values.

Reference no: EM13711498

Questions Cloud

Estimate the molar volume of isobutane at the initial : Saturated isobutane vapor at 320 K is contained in a piston-cylinder assembly. It is expanded to 3 bar by a reversible isothermal process. At 320 K, the vapor pressure of isobutane is 6.243 bar. Using the truncated virial equation of state, i.e. with..

Final equilibrium temperature of the iron sphere and oil : A 1 kg sphere of iron at 1000 degrees Celsius is quenched in a 10 kg bath of oil at 100 degrees Celsius. Assume that no heat is lost to the surroundings and the temperature of the oil is uniform. Calculate the final equilibrium temperature of the iro..

Stream consisting of two organic chemicals : A stream consisting of two organic chemicals: 1) Benzene (C6H6) and 2) Toluene (C7H8), enters a separation column. The total mass flow rate of the stream is 10,000 lbm/hr (pounds/hour). The mass percent of benzene in the stream is 40%.

Determine the change in entropy : Five kg of nitrogen (N2) undergoes a process from p1 = 5 bar, T1 = 400K to p2 = 2 bar and T2 = 500K. Assuming ideal gas behavior, determine the change in entropy, in kJ/K

Heat treatment and toughness and hardness : The relationship between heat treatment and toughness and hardness i.e. briefly explain why the different heat treatments give different toughness and hardness values.

Determine velocity head and pressure head at elevation : Water flows in a 0.15-m-diameter vertical pipe at a rate of 0.65 m3/s and a pressure of 530 kPa at an elevation of 25 m. Determine (a) velocity head at elevation of 20 m, (b) pressure head at elevation of 20 m, (c) velocity head at elevation of 55 m,..

What is the rotational speed of the driven sheave : A v-belt drive system consists of a 12.4" diameter driving sheave and a 21.1" diameter driven sheave connected by a 5V belt. if the center distance is to be no more than 38" specify the longest possible standard belt that can be used and what the res..

Find the elevation of the pump relative to the reservoir : A fire truck draws water from an open constant-level reservoir through a hose of 0.2 ft2 cross section. The water is discharged from the pump through another 0.2 ft2 hose to a surge tank pressurized to 120 psig with air at the top. The pump adds 970 ..

Determine the change in the head loss of the fluid : Consider laminar flow of a fluid through a square channel with smooth surfaces. Now the average velocity of the fluid is doubled. Determine the change in the head loss of the fluid. Assume the flow regime remains unchanged.

User Account

All Pages