Heat air raised and aluminum raised

Reference no: EM13649115

Which requires more heat- a kg of air raised 20degrees celsius to 30 degrees celsius or a kg of aluminum raised from 20 degrees celsius to 30 degrees celsius?

Reference no: EM13649115

Questions Cloud

What is its required length if it is closed at one end : If an organ pipe is to resonate at 22.8 Hz, what is its requiredlength if it is open at both ends, What is its required length if it is closed at one end

How far from the van is the person actually standing : The owner of a van installs a rear-window lens that has a focallength of -0.298m. When the owner looks out through the lens at a person standingdirectly behind the van, the person appears to be just 0.241 m from the back of the van, and appears to..

Coal-fired power plant burns fuel with an energy density : A 250. MW coal-fired power plant burns fuel with an energy density of 35.0 MJ kg-1. Water enters the temp reduction towerat 293 K and leaves at 350. K at a rate of 4200. kgs-1.

Connected across the terminals of a standard wall socket : The primary coil of a step-up transformer is connected across the terminals of a standard wall socket, and resistor 1 with aresistance R1 is connected across the secondary coil. The currentin the resistor is then measured.

Heat air raised and aluminum raised : Which requires more heat- a kg of air raised 20degrees celsius to 30 degrees celsius or a kg of aluminum raised from 20 degrees celsius to 30 degrees celsius?

Space craft is to travelat a constant velocity : Suppose you are planning a trip in which a spacecraft is to travelat a constant velocity for exactly eightmonths, as measured by a clock on board the spacecraft, and thenreturn home at the same speed.

What is frequency of ac current that passes through inductor : A 39.0-mH inductor has a reactance of 2.40 kΩ. What is the frequency of the ac current that passes through the inductor?

What is the rotational inertia of this rigid body : Four identical particles of mass0.50 kg each are placed at the verticesof a 1.5 m multiplied by 1.5 m square andheld there by four massless rods, which form the sides of the square.

Find the velocity of the second cueball : A pool ball istraveling at 2.0 m/s towards an identical pool ball, which isinitially at rest. After thecollision, the first ball moves with a speed of 1m/s at an angle of10o with respect to thepositive x - axis. Find the velocity of the second cuebal..

User Account

All Pages