User Account

All Pages

He tube has ans inside diameter 30mm and a bulk t of 20 c

Assignment Help Mechanical Engineering
Reference no: EM13619170

Water flows in a long, electrically heated tube with q" = constant (constant heat flux). the velocity and temperature profiles are fully developed. The tube has ans inside diameter 30mm and a bulk T of 20 C and a wall T of 30C. Determine the coefficient of heat transfer if a) the mass fow is 0.04 kg/s, b) if the mass flow is 0.4 kg/s.

Reference no: EM13619170

Questions Cloud

Steam at 14 mpa and 350 c enters an adiabatic turbine at a : steam at 1.4 mpa and 350 c enters an adiabatic turbine at a rate of 450 kgh. the turbine has an adiabatic efficiency of
The tube has a inside diameter of 30mm and a bulk t of 20 c : water flows in a long electrical heated tube with q constant . the velocity and temperature profiles are fully
Assume you are in charge of a production line which allows : assume you are in charge of a production line which allows for no more than 1 defectives in order to be in compliance.
A manager of a pizza outlet has collected monthly sales in : a manager of a pizza outlet has collected monthly sales in 000 data for some time in an attempt to predict sales for
He tube has ans inside diameter 30mm and a bulk t of 20 c : water flows in a long electrically heated tube with q constant constant heat flux. the velocity and temperature
Determine the temperature of the outer pipe wall surface : a cylindrical pipe with inner and outer radii of 1.0 m and 1.1 m respectively is comprised of a material such that the
A certain object weighs 300 n at the earths surface : a certain object weighs 300 n at the earths surface. determine the mass of the object in kilograms and its weight in
Air expands from 100kpa 40 degrees c with volume 75 m3 to : air expands from 100kpa 40 degrees c with volume .75 m3 to 15kpa in a polytropic process with polytropic exponent n.
Vinefera grapes are picked when the outside temperature is : vinefera grapes are picked when the outside temperature is 35c and then cooled to 5c within a 12-h period. for each

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Neglecting changes in kinetic and potential engery and

a heat exchanger at an industrial plant uses river water to condense 2x105 kgh of steam from saturated vapor to

  Determine the magnitude t of applied torque

the tank has a 180mm diameter and 12 mm wall thickness. knowing that the tank contains compressed air under a pressure of 8 Mpa, determine the magnitude t of applied torque for which the maximum normal stress in tank is 75 Mpa.

  Calculate the strains in the upper and lower falnges if the

in measuring the strains applied to a symmetrical i beam a full bridge is used. two strain gages are attached to the

  Find densities, enthalpies and efficiency for gas

find densities, enthalpies and efficiency for gas turbine power cycle with the following conditions.

  A 65 wt ni-35cu alloy is heated to temperature within the

a 65 wt ni-35cu alloy is heated to temperature within the apha liqquid-phase region. if the compostiong of the alpha

  What fraction n of the weight of the jet airplane is the

what fraction n of the weight of the jet airplane is the net thrustnozzle thrust t minus air resistance r required for

  Find the velocity of the wind

A plane can fly 305 mph in still air. If it can fly 185 miles downwind in the same amount of time it can fly 120 miles upwind, find the velocity of the wind.

  A steam turbine is operated ith an input temp of 800c and

a steam turbine is operated ith an input temp of 800c and exhaust temp of 150c. what is the maximum amount of work the

  2103 v 40 v b c qv e0pr2d r qdvpe012 r 424 m 42 a

2103 v 40 v b c qv e0pr2d r qdvpe012 r 4.24 m 42 a parallel-plate air-gap capacitor has a capacitance of 0.14 f.

  Iin the other stream refrigerant 134a enters at 10 bar 80

a wellinsulated counterflow heat exehanger operates at steady state. in one stream liquid water enters at 10 degree

  Calculate the thermal efficiency of this cycle

The Brayton cycle shown in figure 6.41 operates using CO2 as a working fluid with compressor and turbine isentropic efficiencies of 1.0. Calculate the thermal efficiency of this cycle when the working fluid is modeled.

  Find alpha the angular acceleration

Note that the positive y direction is downward and counterclockwise torques are positive. find alpha the angular acceleration?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd