Given these conditions if the line operates for 160 hrs

Assignment Help Mechanical Engineering

Reference no: EM13638280

A transfer machine has 36 stations. The ideal cycle time = 1.50 min. Frequency of line stops F = 0.2; however, this is complicated by the fact that in 25% of the line stops, the part is damaged and must be removed from the line. In other words, 25% of the line stops operate according to the lower-bound approach, while 75% operate under the upper-bound approach. The average downtime for the lower bound stops = 10.0 min. and the average downtime for the upper bound stops = 8.0 min. Given these conditions, if the line operates for 16.0 hrs., determine the number of good parts produced and the number of parts removed from the line.

Reference no: EM13638280

Questions Cloud

A jetliner traveling northward is landing with a speed of : a jetliner traveling northward is landing with a speed of 77.9ms. once the jet touches down it has 832 m of runway in

A sprinter explodes out of the starting block with an : a sprinter explodes out of the starting block with an acceleration of 2.50ms which she sustains for 1.24s. then her

The power required to service a 400kw cooling load what : an ideal vapor compression refrigeration cycle that uses r-134a maintains a pressure in the condenser of 1000kpa and

A child operating a radio-controlled model car on a dock : a child operating a radio-controlled model car on a dock accidentally steers it off the edge. the cars displacement 0.9

Given these conditions if the line operates for 160 hrs : a transfer machine has 36 stations. the ideal cycle time 1.50 min. frequency of line stops f 0.2 however this is

Let the x axis be parallel to the ground the y direction : a skateboarder shoots off a ramp with a velocity of 6.8 ms directed at an angle of 59deg above the horizontal. the end

Suppose 4 balls are going to be randomly placed into one of : suppose 4 balls are going to be randomly placed into one of 4 buckets. find the probablility thata. exactly one bucket

Your ears are sensitive to differences in pitch but they : your ears are sensitive to differences in pitch but they are not very sensitive to differences in intensity. you are

If a bar of sae 1040 is to be turned with a high speed : if a bar of sae 1040 is to be turned with a high speed steel tool with a feed of 0.015 per revolution and a depth of

User Account

All Pages