Generate a clock signal with 5 khz frequency

Assignment Help Electrical Engineering
Reference no: EM13227475

Write an asm HCS12 program to flash LEDs on a dragon+ board three times when SW5 is pressed with a 5 kHz frequency, and 50% duty cycle clock signal. Generate a clock signal with 5 kHz frequency, and 50% duty cycle. Flash LEDs (PB0-PB7) three times at frequency 1 Hz based on the generated 5 kHz signal.

Reference no: EM13227475

Questions Cloud

Describe hydrochloric acid and sodium hydroxide : The molar heart of neutralization from hydrochloric acid and sodium hydroxide is -57.3 kJ/mol. Use this accepted value to predict the heat evolved during the neutralization of 655mL of 1.00 M hydrochloric acid by 1.00 M sodium hydroxide
Compute the magnitude of the stress on each of the fiber : A composite has a cross-sectional area of 320 mm2 and is subjected to a longitudinal load of 44,500 N. The continuous and aligned fiber-reinforced composite is to be produced consisting of 30 vol% aramid fibers and 70 vol% polycarbonate matrix.
Which best describes client role in generating ideas stages : participates actively in both the generating and focusing phases d. selects the tools that the group should use.
Compute the mass of silver deposited by a battery : Suppose the current flowing from a battery is used to electroplate an object with silver. Calculate the mass (in grams) of silver the would be deposited by a battery that delivers 1.25 A/hr of charge.
Generate a clock signal with 5 khz frequency : Write an asm HCS12 program to flash LEDs on a dragon+ board three times when SW5 is pressed with a 5 kHz frequency, and 50% duty cycle clock signal. Generate a clock signal with 5 kHz frequency, and 50% duty cycle.
What are the most important criteria : In selecting outside advisors, a board, consultants, and the like, what are the most important criteria?
Has globalization of supply chains encouraged or discouraged : Has globalization of supply chains encouraged or discouraged Vendor Managed Inventories?
What is the nominal full load current per phase : A 150MW alternator generates an open-circut line-t0-line voltage of 12kV at nomial DC excitiation. When the terminals are placed in short-circuit the resulting current per phase is 8000A. a) Calculate the approximate value of the synchronous reacta..
How many moles of no are obtained n2 is completely reacted : Consider the reaction below. N2(g) + O2(g) ? 2 NO(g) Part A: How many moles of NO are obtained when 0.032 mol of N2 is completely reacted?

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Determine the resistance of the rheostat in rotor circuit

A three phase, 25-hp, 440-V, 60-Hz, 1750 rpm, wound-rotor induction motor has the following equivalent circuit parameters:R1=0.20 ohms, X1=1.0 ohms, R2=0.15 ohms, X2=0.8 ohms, Xm=30 ohms The motor is connected to a three phase, 440-V, 60-Hz supply.

  Application of sustainable technologies

What is the problem you are investigating and explain the issue, its history, the impact it makes locally

  The condition on the sampling period is determined

Finding the periodicity in N of the discrete time signal x(n) = Cos(3pi*Ts.n + pi/4) and then plotting the discrete signal. From this the condition on the sampling period is determined

  Computation the percentage second harmonic distortion

Calculate the percentage second harmonic distortion present in the output. Calculate the percentage error in the output voltage compared to its ideal value at the instant of time when t= 1/3200 seconds.

  Find the applied voltage of an iron-core transformer

Find the applied voltage of an iron-core transformer if the secondary voltage is 240 v, and Np = 60 with Ns = 720

  Approve that we wished to match an admittance

Suppose that we wished to match an admittance using a double-stub tuner where the stubs are lambda/4 apart. For what range of admittance values can

  How much charge passes through a cross section

the ends of a length of wire are labeleda and b. If the current in the wire is iab = -3A, are electrons moving toward a or b? How much charge passes through a cross section of the wire in 3 seconds?

  Define what is the channel capacity for a channel

What is the channel capacity for a channel with a 300 Hz bandwidth and as S/N = 3? 2nd problem: Given a channel with a 50 kHz bandwidth and a S/N = 127, determine:

  Explain a square wave signal with voltage levels

A square wave signal with voltage levels 0 volts and 2.0 volt at a frequency of 1.00 MHz is multiplied by a sine wave at a frequency of 5.0 MHz

  Determine angular frequency and period for undamped cases

The following 4 differential equations describe mass spring systems. Identify each system as either undamped, overdamped, underdamped, or critically damped (Justify your answer). Determine the angular frequency and period for the undamped and the ..

  Design a 4-bit decrementer using half-adders

Design a 4-bit decrementer using Half-adders and inverters as building blocks. The circuits impleents A-1=S. Draw the circuit diagram. Hint: consider addtion of the 2s complement of -1 =1111. Begin with a 4-bit adder circuit constructed with 1-bit..

  Hhow many voice channels are carried by a transmission

How many voice channels are carried by a E1 transmission given 8 kHz sampling and 8 bit words? Why is an end of frame marker always required in a digital telephony system?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd